Converters.TV 770 User manual

1 x 8 HDMI Distribution
Amplifier - ID# 770
Operation Manual

Introduction
The 1x8 HDMI distribution amplifier is a high performance HDMI distribution
amplifier. It allows one HDMI source to connect up to 8 HDMI displays
simultaneously.
Features
•Built in EDID simulator and HDCP keyset allows each output to work
independently when connecting to a HDMI display.
•Splits a HDMI source up to 8 outputs without signal loss.
•Supports DVI source and DVI display by using HDMI to/from DVI adaptor
cable.
•Supports a wide range of PC and HDTV resolutions from VGA to UXGA and
480p to 1080p. Maximum resolution bandwidth 165MHz.
•Can be cascaded up to 3 layers, or more if using high quality cable.
•Each of the buffered output can run up to 15 meters@1600x1200.
Operating Functions
and
Controls
Front Panel
1. HDMI output 1/2/3: Connects to the HDMI input of your displays.
2. HDMI input: Connects to the HDMI or DVI output of your source equipment
such as DVD player or Set Top Box.
3. Sync LED: The LED will illuminate when the HDMI source signal is connected
to the input and is detected by the unit.
4. Power input: Plug the supplied 5VDC power supply into the unit.
The LED will illuminate when connected.
Rear Panel
1. HDMI output 4/5/6/7/8: Connects each of these output ports to the HDMI
input of a HDMI display.

Installation
Specifications
Fre uency bandwidth: 1.65Gbps(single link)
- Input/Output: 1-in/8-out HDMI female port
- Power consumption: 6 Max
- 5VDC universal power supply
- Operating temperature range: 0 ~ 48 C
- Operating humidity range: 30 to 80% RH
- Dimensions: 240( ) x103(D) x 24(H)mm
- Weight: 1Kg