Cook's Companion B422785-00003-00000 User manual

1
B422785 –191031
Save These Instructions - For Household Use Only
FOOD PROCESSOR
Owner’s Manual

2
B422785 –191031
PARTS DESCRIPTION
1. Motor base
2. Driver
3. 3.2 quart processing bowl
4. Bowl cover
5. Feed tube pusher
6. 1.85 quart jar
7. Measuring cup
8. Grinder base
9. Sealing ring
10. Mill grinder housing
11. Spatula
12. Blade holder
13. French fry disc
14. Slicing disc
15. Julienne disc
16. Kneading blade
17. Chopping blade
18. Emulsifying disc
19. Citrus juicer sieve
20. Citrus juicer cone

3
B422785 - 191031
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed, including the following:
1. Read all instructions BEFORE USE!
2. This appliance is for household use only.
3. Never dip machine into any liquid and sharp edges. Do not use the
appliance with wet hands. If the appliance is humid or wet, unplug
it immediately.
4. Avoid children or other people who do not know the operation of
this machine to use it, unless they are under proper instruction. This
appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
5. Always disconnect the machine from the supply if it is left
unattended and before assembling, disassembling or cleaning.
6. If the supply cord is damaged, it must be replaced by the
manufacturer of its service agent or a similar qualified person in
order to avoid a hazard.
7. Keep your finger away from moving parts and fitted tools. Never
put your fingers etc. in hinge mechanism.
8. Use only original spare parts.
9. In order to ensure your children’s safety, please keep all packaging
(plastic bags, boxes, polystyrene etc.) out of their reach.
10. Do not interfere with any safety switches.
11. Place the machine on a smooth, flat and stable working surface.
12. Be very careful when you handle the blades or inserts. Be especially
careful when you remove them from machine, their cutting edges
are very sharp.
13. Wait until moving parts stop running before you remove the lid of
machine.
14. Do not operate the appliance with a damaged cord or plug. Do
not operate after the appliance malfunctions, is dropped or
damaged in any manner. Contact the manufacturer at their

4
B422785 - 191031
customer service telephone number for information on
examination, repair, or adjustment.
15. The use of attachments not recommended or sold by the
manufacturer may cause fire, electric shock or injury.
16. Do not use outdoors.
17. Do not let cord hang over edge of table or counter.
18. Only use the appliance for its intended domestic use, the
manufacture will not accept any liability if the appliance is subject
to improper use or failure to comply with these instructions.
19. Check that the voltage rating of the appliance does in fact match
that of your electrical system.
Any connection error will nullify the warranty.
20. The appliance must be plugged into an earthed electrical socket.
21. If you have to use an electrical extension lead, it must be earthed,
and you should make sure that no-one can trip over it.
22. Do not allow the power cord to hang within the reach of children,
come close to or into contact with the hot parts of your appliance,
any other source of heat or sharp edge.
23. Switch off the appliance and disconnect it from supply before
changing accessories or approaching parts which move during
use.
24. The appliance is designed for the preparation of small quantities of
food, which have to be consumed rather quickly. It is not designed
for the preparation of large quantities at once.
25. Keep hands and utensils out of container while operating to reduce
the risk of severe personal injury and/or damage to the appliance.
A rubber spatula may be used but must be used only when the
appliance is not running.
26. To reduce the risk of injury, never place the cutting unit blades on
base without the bowl properly installed.
27. Always operate the appliance with lid in place, except for the fruit
juicer attachment
28. Always close the bowl with the lid before starting the operation.
29. Install blades properly and cautiously. Injury can result if moving
blades accidentally become exposed.
30. To disconnect cord, turn the speed selector to "0”, then remove the
plug from wall outlet.
31. Avoid contacting moving parts.
32. Do not blend hot liquids.

5
B422785 - 191031
Caution!!
•Always place the appliance on a horizontal, level, and stable
surface.
•This appliance is intended for normal household use only.
•Always unplug the appliance after use.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
POLARIZED PLUG INSTRUCTIONS
This appliance is equipped with a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this plug will fit into
the polarized outlet only one way. If the plug does not properly fit into
the outlet at first, reverse it. If it still does not fit, contact a competent
qualified electrician. Do not attempt to modify the plug in any way.
SHORT CORD INSTRUCTIONS
A short power supply cord is provided to reduce the hazards resulting
from becoming entangled in or tripping over a longer cord. Extension
cords may be used if care is exercised in their use.
•The electrical rating of the extension cord should be at least that of
the appliance. If the electrical rating of the extension cord is too
low, it could overheat and burn.
•The resulting extended cord should be arranged so that it will not
drape over the countertop or tabletop where it can be pulled on by
children or tripped over.

6
B422785 - 191031
SPECIFICATIONS
Model No.
B422785-00003-00000 / B422785-00005-00000 /
B422785-00025-00000
Supply Power
120V, 60Hz
Rated Power
600W
Capacity
3.2 quart bowl / 1.85 quart jar
BEFORE THE FIRST USE
•Unpack the appliance and its accessories. Wash the accessories in
hot, soapy water and then wipe them dry with a paper towel.
•Before connecting to the power, recheck the type of supply and
the mains voltage match with the details given on the rating label
on the appliance.
•This appliance is not for professional use. You should follow the
standard operating times. If the operation is not finished during the
specified period, shut off the machine and let it cool for 10 minutes
before next round of operation. This can lengthen the lifespan of
the machine. Failure to follow this instruction carefully may result in
damage to the motor.
•To avoid spillage or overflow, please process food according to the
specified maximum capacity indicated on the bowl or jar.
•When mixing hot liquid in the blender, do not fill more than 2/3 of
the jar and be very careful in order to avoid splashing of hot liquid,
otherwise you can get burned.
•Do NOT use other utensils in place of the pushing device (for
example: fingers, forks, knives, etc.).
•To obtain finely and uniformly chopped food, cut the solid food into
small pieces before placing it in the appliance; in some cases
(parsley for example) it is best to use the “pulse” function to chop at
intervals and to mix the food from time to time before chopping
again.
•When slicing foods, different thicknesses can be obtained by
varying the force with which they are pressed against the disc; in
any case do NOT apply excessive pressure.

7
B422785 - 191031
•Do not chop foods with hard parts, the central core of pineapples
for example (woody shells, etc.); do not chop particularly hard
types of food (ice, hard cheese, etc.).
Important:
When assembling the bowl on the base, please make sure to always
position the handle of the bowl on the right side, facing the food
processor, or the safety switches will not be triggered, and the
appliance will not work
HOW TO DISASSEMBLE
•Remove the pusher. Turn the lid or citrus sieve counterclockwise, lift
and remove.
•Lift the blades or disks or accessories from the driver. Be careful,
blades are sharp.
•Turn bowl, blender jar or grinder counterclockwise to unlock from
motor base. Lift and remove.
OPERATING INSTRUCTIONS
SPEED REGULATOR & PULSE SPEED
•Use the speed control knob on the motor base to adjust speed.
•Turn the knob to the right to gradually increase speed.
•Turn the knob to the left for the Pulse function. When using the Pulse
mode, the unit works at higher high speed in small intervals of time.
CHOPPING & KNEADING BLADES
2 versatile knife blades are included as attachments, a stainless-steel
blade to chop foods and plastic blade to knead dough. Use the image
below as a step by step guide to assemble the knife blades into the
appliance.

8
B422785 - 191031
Notes:
•Ensure the bowl in step 1 locks properly with the lid shown in step 4
in order to allow the appliance function correctly.
•Step 3 illustrates how either the stainless-steel blade or the plastic
blade can be adjusted to fit onto the shaft. Make sure it is securely
locked in place.
•Note: when use of this operation is completed, the knife blades can
be disassembled by twisting counterclockwise.
Using the chopping blade
•Cut food into small pieces.
•Place food into the processing bowl and close the lid.
•Select the desired speed level.
•Please note: Do not allow the appliance to work for more than 3
minutes at a time. Allow the motor to cool down for an
approximately 10 minutes before you begin the next operation.
•For food that is coarse, it is suggested to use the Pulse setting.
•Allow the blade to come to a complete stop before opening the
lid.

9
B422785 - 191031
Follow the suggested speeds below to achieve the best cooking results.
Food
Processing size
Quantity
Processing time
Speed
Onion
4 pcs
Without skin
9 oz
approx. 30-60 sec.
Pulse
Garlic
Without skin
9 oz
approx. 30-60 sec.
Pulse
Carrot
< 1x1 inch
9 oz
approx. 30-60 sec.
High
Speed /
Pulse
Meat
< 1x1 inch
without bone
9 oz
approx. 30-60 sec.
High
Speed /
Pulse
Using the kneading blade
•Cut food into small pieces.
•Place food into the processing bowl and close the lid.
•Select desired speed level.
•Please note, do not go over 2 minutes of use with the food
processor when using the kneading blade. Allow the unit to cool
down for approximately 10 minutes before the next operation.
•For coarser foods, it is suggested to use the Pulse setting.
•Allow the blade in the food processor to come to a complete stop
before opening the lid.
Follow the suggested speeds below to achieve the best cooking results.
Food
Suggest quantity
Processing
time
Speed
Flour /
water
Flour
3.5 oz
approx.
90 sec.
Low
Speed
water
2.3 oz
Mixing
of cake
batter
Eggs
1 pc
approx. 2
min.
Low
Speed
Margarine
1.7 oz
Sugar
1.7 oz

10
B422785 - 191031
Flour
1.7 oz
Baking powder
½ tsp
SLICING / JULIENNE / FRENCH FRY BLADES
Use the image below as a step by step guide to assemble blades into
the food processor.
Julienne Blade
Slicing Blade
French Fry Blade

11
B422785 - 191031
NOTES:
•Ensure the bowl in step 1 and the lid in step 6 can lock properly into
place. The food processor will not function if not placed correctly.
•Step 4 demonstrates how any of the 3 blades (julienne, slicing,
French fry) can be used and placed onto the blade holder.
•Always be careful when handling blades and inserting them into
the appliance as they are very sharp.
•Switch the food processor on and push food down evenly with the
feed tube pusher. Never place your fingers in the feeding chute.
•Pay close attention to the capacity line of the container. Once your
food approaches the max line on the container, the operation
should be stopped, and food should be poured out before
continuing.
•Once you have finished slicing, wait for the blade to come to a
complete stop and open the lid.
•Blades can be disassembled by turning them counterclockwise
from the blade holder.
Follow the suggested speeds below to achieve the best cooking results.
Food
Suggest
quantity
Processing
time
Speeds
Julienne
Disc
Slicer
Disc
French Fried
Potato Disc
Carrot
17 oz
approx. 1
min.
Low
Speed
High
Speed
N/A
Potato
17 oz
approx. 1
min.
N/A
N/A
High Speed
Zucchini
17 oz
approx. 1
min.
N/A
High
Speed
N/A
Leek
17 oz
approx. 1
min.
N/A
High
Speed
N/A
Beetroot
without
skin
17 oz
approx. 1
min.
N/A
High
Speed
N/A

12
B422785 - 191031
Tips:
•Choose the desired disc according to the processed food and
desired shape of food.
•Push softly when feeding food.
•Pre-cut food into smaller pieces according to the diameter of the
feeding chute.
•Feed gradually for better results. When cutting soft food, choose a
lower speed to avoid the food turning soupy. If a large quantity
food needs to be cut, please cut it in several batches. Respect the
recommended pauses in the operation between batches.
•To prolong the lifespan of your appliance, do not use continuously
for more than 30 seconds. Let the motor cool down at least 10
minutes before the next use.
CITRUS JUICER
The citrus juicer attachment can be used to squeeze the juice from
citrus fruits (e.g. oranges). Follow the image below as a step by step
guide in using this function.

13
B422785 - 191031
•Position the driver upright on the motor base. Start with the bowl’s
handle at the back. Position the processing bowl around the driver
onto the motor base and turn clockwise to lock it on the motor
base.
•Place the Juicer on the bowl and turn clockwise to lock into
position. Position the Juicer on the driver.
•Ensure the bowl in step 1 and the juicer in step 3 have locked into
position properly as unit will not be able to power on if not
assembled correctly.
•Turn dial clockwise on a lower speed-setting position.
•Juice the citrus by pressing the citrus cut in half on the rotating
cone.
•The juicer accessory should only be taken out of the food processor
once it has come to a complete stop.
Tips:
•Only lower speed should be chosen for operating the juicer
attachment.
•Pay close attention to the unit’s capacity line. Once the max
capacity has been reached, operation should be stopped to
empty out the unit.
•Do not use for more than 3 minutes at a time. Allow the motor to
cool down for at least 10 minutes before the next operation.
•To get the best results when juicing, press down on your fruit
vertically and on all sides.
EMULSIFYING DISC
Use this attachment for to prepare aioli, instant pudding, mayonnaise,
or to whip cream, whisk eggs, or prepare cake batter.
Use the image below as a guide in assembling this accessory.

14
B422785 - 191031
•Make sure the bowl and lid, as shown in step 2 and step 6, are
locked well into place or the unit will not power on.
•Note: Do not use to prepare cake mixtures with butter or margarine
or to knead dough.
•Use room temperature eggs for whisking egg whites.
•Ensure that the bowl and emulsifying disc are dry and grease free.
•The disc should only be taken out of the unit when it has come to a
complete stop.
•The emulsifying disc can be disassembled by turning
counterclockwise from the base.
•Clean the emulsifying disc after each use.
Tips:
•For best results, this function should be used at Max speed.
•Do not use this function for more than 3 minutes at a time. Allow the
motor to cool down for at least 10 minutes before the next
operation.

15
B422785 - 191031
GRINDER
Grinder can be used for milling coffee beans, almonds or similar foods.
Follow the image below as a step by step guide in assembling the
grinder onto the food processor.
•Make sure that the sealing ring shown in steps 1, 2, and 3 are
placed properly together.
•Once the grinder is put together, ensure it can lock onto the body
as shown in step 4. The food processor will not work if items are not
placed properly together.
•To start grinding, select your speed using the speed control knob.
•The grinder can be taken out once the food processor has come to
a complete stop.
•After operation, you can disassemble the accessory by turning
counterclockwise against the base.

16
B422785 - 191031
Tips:
To prolong the lifespan of your appliance, do not use continuously for
more than 30 seconds. Let the motor cool down for at least 10 minutes
before the next use.
BLENDER
The blender attachment can be used to mix, puree and chop a variety
of foods and liquids. It can also be used to chop ice.
Use the image below as a step by step guide in assembling the
blender.
•Position the blender jar onto the motor base and turn clockwise to
lock it on the motor base, until you hear a click sound. As shown in
step 2, make sure the blender locks into place with the base or the
unit will not power on.
•Be extra cautious when handling the blades as they are very sharp.
•Never open the lid during operation. The lid of the blender should
only be opened when blades are no longer rotating and have
come to a complete stop. For extra caution, you can unplug the
appliance before removing the lid.

17
B422785 - 191031
•Cut solid ingredients into small pieces before you process them. For
larger quantities, pour small batches of ingredients at a time instead
of one large quantity.
•Cooked ingredients can also be processed in the blender as soup
preparation.
•If blending results are unsatisfactory, switch the appliance off and
stir the ingredients with a spatula before continuing to blend.
•Use the Max or Pulse speed for best blending results.
Tips
•To crush ice, use the Pulse function. Always add
enough water for the ice to start floating.
•The blender should not be worked for more than 2 minutes at a
time, allow the appliance to cool down for 10 minutes before the
next operation.
•Avoid going over 1 quart in the blender for liquids that are hot or
tend to foam (e.g. milk) to prevent spillage.
•When mixing hot liquid, do not fill more than 2/3 of the jar and be
very careful in order to avoid splashing of hot liquid, otherwise you
can get burned.

18
B422785 - 191031
CLEANING AND MAINTENANCE
1. Unplug the appliance from the socket before cleaning.
2. Never immerse the motor unit in water or put it under running water.
Instead, wipe the outside of the housing with a soft dry or slight
damp cloth.
3. Do not use any abrasive cleaning solutions.
4. For easier cleaning, quickly rinse the accessories after use.
5. Components that come in contact with food can be cleaned in
soapy water.
6. Allow the parts to dry thoroughly before reassembling the device.
PROPER DISPOSAL
This product contains recyclable materials.
Do not dispose this product as unsorted municipal waste. Please
contact your local municipality for the nearest collection point.

19
B422785 - 191031
TROUBLESHOOTING
PROBLEM
EASY SOLUTION
Machine does not
work
* There is a safety interlock switch on the processing
bowl / blender. Make sure bowl and lock are
securely locked into position.
* If the motor still won’t start, check the power cord
and power outlet.
French Fry and
Julienne Disks
* Always clear any blocked potato from the disc
before processing more potatoes.
Some food remains
on the disc after
processing
* It is normal for small pieces to remain after
processing. Simply remove the food remains and
rinse the disc under water.
Motor slows down
when mixing dough
* Amount of dough may exceed maximum
capacity. Remove half and process in two
batches.
* Do not add more than 9 oz dough.
Dough is too dry
* Run machine and add water through feed cube,
1 tablespoon at a time until dough mixes inside of
the processing bowl.
Dough is too wet
* Run machine and add flour through feed cube, 1
tablespoon at a time until dough is able to mix in
the processing bowl.
Motor slows down
when using the
chopping blade
* Amount of meat or food may be too much.
Remove half and process in two batches.
* If chopping meat, trim the meat of fat before
processing.
Vibrates/moves
during processing
* Clean and dry the rubber feet at the bottom of
the unit.
* Also make sure that the maximum load
capacity is not being exceeded.

20
B422785 - 191031
Thank you for choosing the Cook’s Companion Food Processor.