Cooke & Lewis CLEF3SS-C User manual

Operating Instructions - Oven Cooke & Lewis CLEF3SS-C
Product Functions
The oven is controlled by a thermostat between 50°C and 250°C, depending on the temperature required. The
thermostat pilot light turns on and off to indicate the temperature control during use.
The required cooking mode is selected using the multi-functional control button. The functions that may be selected
are:
Using the 6-button electronic timer

Auto: Automatic programme
•Light on: Programmer in automatic position and programmed.
•No symbol lit, except the clock numbers means that a waiting time is programmed.
Programmer functions
•24 hour display clock.
•Alarm (Maximum 23:59)
•Automatic programming (start and end of cooking).
•Semi-automatic cooking (only start or only end of cooking).
•The timer only works when the appliance is connected to the electricity supply.
Electronic clock
•To enter the correct time press symbol and at the same time of of the buttons or until the correct
time is shown. There is a 5 second acceptance delay during which no button should be touched.
•The speed that the marker changes will noticeably increase some seconds after beginning to press the buttons
and .
Manual cooking (without using the programmer)
•To use the oven with the help of the programme, the flashing “Auto” indication must be cancelled by pressing the
button .
•If the “Auto” indicator is not flashing (which means that the oven is programmed) the programming must be
cancelled first by pressing and setting the marker to 0.

Automatic cooking
Start of cooking:
1. Programme the cooking time using .
2. Press the buttons or to select the cooking time.
3. Select the temperature and function required using the thermostat and selector knobs.
End of cooking:
1. Programme the end of the cooking time using
2. Press the buttons or to select the cooking time.
3. Select the temperature and function required using the thermostat and selector knobs.
Start and end of cooking:
1. Programme the cooking time using
2. Press the buttons or to select the cooking time.
3. Press for programming the off time.
4. Select or to set the off time.
After these operations the “Auto” symbol will appear on the display, indicating that the oven has been programmed.
Pre-set cooking function
Programming the duration of the cooking:
•Set the chosen cooking time using the button and set the duration.
•Cooking will start immediately, the symbols “Auto” and will appear on the display. When the programmed
time has passed the cooking will stop and the alarm will sound intermittently.
•Turn the alarm off as described above.

Programming the end of the cooking:
•Set the chosen end time for the cooking using the button and set the end time. Cooking will start
immediately and the symbols “Auto” and will appear on the display. Cooking will end at the set time and
the alarm will sound intermittently. Turn it off as indicated above.
•The state of the programming can be checked at any time by pressing the corresponding button.
•The programming can also be cancelled at any time by pressing and setting the marker to zero. By then
pressing the oven will be ready for manual operation.
Electronic alarm
•The timer function consists solely of an alarm which can be adjusted for a maximum period of 23:59. To adjust the
time, press the button and at the same time or until the desired time appears. Having made the
adjustment, the real time will reappear next to the symbol .
•The countdown will begin immediately and can be viewed on the display at any time by simply pressing the
button.
•When the time has ended, the symbol will disappear and the alarm will sound intermittently, which may be
turned off by pressing the button. The alarm does not control any of the oven functions.
Notes
•If an error is made it will be indicated via an alarm and the “Auto” symbol will flash. Cancel the adjustment by
pressing the button and then re-programme to rectify it.
•The alarm that sounds at the end of a programme will continue for seven minutes unless cancelled by pressing
the button . However, at the end of the seven minutes the “Auto” symbol will continue flashing.
•The alarm has three tone positions: low, medium and high. To adjust the tone, check that the timer is in the
manual mode, then press the button and hold down to hear the tone selected. On releasing the button
, press again and hold down to select another tone. Repeat the procedure until the required tone is heard.