coolado tPump P User manual

INSTRUCTION MANUAL
tPump MODEL P
CORDLESS HIGH-PRESSURE AIR PUMP FOR TIRES
Please be sure to read this manual carefully before use
1. PRODUCT SPECIFICATION
Please read this instrucon carefully before using this product for the first me. It
will guide you to use it correctly and remind you of the relevant precauons.
This pump is a professional tool and not a toy.
This product is a portable smart air pump, suitable for the inflaon of bicycle res,
balls, motorcycle res and other high-pressure inflatables.
The product and tube will get hot aer long use (>10 min) Aer long use please
allow the pump to cool down for at least 10 minutes before proceeding.
Keep away from children.
2. CHARGING
●Please charge the baery before using the product for the first me.
●Use the charging cable to connect to a 5V 2A charger (not included).
●Baery indicator will light when charging:
oRed light: charging
oGreen light: fully charged

3. PRODUCT DESCRIPTION
4. ACCESSORIES LIST
1.Presta valve adaptor
2.Plasc nozzle adaptor
3.Ball needle adaptor
4.Tube with schrader valve
5.Type-C charging cable

5. USE OF DIFFERENT ADAPTERS
SCHRADER VALVE
The tube is standard equipped with a Schrader
valve suitable for
- Mountain bikes
- Electric bikes,
- Motorcycles
- Cars,
just connect it directly.
PRESTA VALVE
Connect the Presta adapter first to the tube of the
pump, then connect the tube to the Presta valve
suitable for:
- Road bikes
- Individual mountain bikes
BALL NEEDLE
Connect first the ball needle adapter to the tube of
the pump, moisture the needle a lile and plug it
into the valve of the ball. Suitable for
-basketball,
-football
-other kinds of balls.
6. INFLATING
START INFLATION
1. Screw one end of the air tube into the screw opening, then screw the other end
into the re valve (note: for the Presta valve,please install the Presta valve
adapter at first).
2. Press the power switch to start the inflang.
3. Press the power switch to stop the inflaon.
START LIGHT FUNCTION
Press the light buon to switch the light on. Press again to switch the light off.
BATTERY AND BATTERY LIFE
-Fully charged at 25°C ambient temperature, the connuous working me is
about 30 minutes,
-Higher pressures or lower ambient temperatures will reduce the baery
working me.

7. CHOOSE THE RIGHT AIR PRESSURE
In order to ensure safety, before using the product to inflate, please inquire about
the air pressure value required by the inflated item by reading the instrucons or
other ways to avoid accidents caused by low-pressure or over-pressure.
Suitable air pressure value for common products
Product
category
Product type
Recommended
pressure range
Bicycle
12, 14, 16-inch bicycle re
20, 22, 24-inch bicycle re
26, 27.5, 29 inch bicycle
re
30-50psi 2,0-3,5 bar
40-50psi 2,7-3,5 bar
45-65psi 3,0-4,5 bar
Motorcycle
Motorcycle re
25-45psi 1.8-3.0 bar
Car
Small car re
35-40psi 2.2-2.8 bar
Ball
Basketball
Football
Volleyball
Rugby
7-9psi 0,5-0,6 bar
8-16psi 0,5-1,1 bar
4-5psi 0,3-0,4 bar
12-14psi 0,8-1,0 bar
8. SPECIAL NOTES
●The inflaon pressure of items such as balloons, toy balls, swimming rings and
other products is lower than the range of this air pump, and the inflaon
cannot be automacally stopped by the preset pressure. The Coolado ePump
is a beer choice for these items
●Before inflang, please confirm the air pressure value required to avoid injury
caused by over-inflaon bursng.
●Please avoid pung it in a high temperature environment such as a car that
can be exposed to direct sunlight;
●Do not bend or step on the inflaon tube during inflaon to keep the air flow
smooth.
●Stay near the pump when the air pump is working and make sure the air pump
is not over-pressurizing.
●Protect the pump against moisture, heavy falls, water immersion and mud or
sand intrusion;
●There is a DC motor in the air pump, which may generate electric sparks
during operaon. So do not put il near flammable liquids or gases when in use.
●This product is a professional tool and not a toy, keep away from children;
keep a safe distance from children when inflang objects;
●Before seng the inflaon pressure value, please make sure that you have
selected the correct measurement unit, it may lead to high air pressure
danger.
9. PRODUCT PARAMETERS
Inflatable pressure range
0.2~10.3 bar/3~150 psi
Product size
Ø32x230mm (metal size without hose )
Working temperature
Charging: 0°C~45°C ,
Discharging: -10°C~45°C
Storage temperature
-10°C~45°C
Trachea size
175±5mm , including air nozzle
Baery capacity
2.600 mAh
Working noise
1 meter away, the noise is less than 75dB
Input current
5v 2A
Charging interface
micro -USB
Charging me
less than 4 hours
Common unit conversion: 1 bar= 14.5psi, 1 bar= 100kPa.

10. TROUBLESHOOTING
MALFUNCTION
SOLUTION
Slow inflaon
1. Check whether the baery is
sufficiently charged
2. Check if the air hose is leaking
3. Check if the connecon parts
on both ends of the air tube are
ght
The air pump has shut down
automacally aer screwing the valve
adapter
Press the Start/stop buon to
turn on the pump again
Air leakage when connecng the tube
Tighten the tube
11. CLEANING & MAINTENANCE
●The Coolado needs only to be cleaned on the outside surface with a dry, so
cloth.
●The product has a built-in non-removable lithium baery. Please do not throw
the product into fire or discard il carelessly. The lithium baery may cause fire,
spontaneous combuson or explosion due to overheang, impact and water
ingress.
●The storage temperature of the product should not be lower than -10 ° C or
higher than 45 ° C. Excessive heat or cold will shorten the product's lifeme
and damage the built-in baery.
●The baery may be damaged if not used for a long me. It is recommended to
charge the pump at least once every three months.
12. WARRANTY
●The Coolado warranty is in accordance with the EU law and regulaons
●30 days money back guarantee from purchasing date. The pump must be
returned to its original undamaged package. (See return policy on our website)
●Coolado provides a one-year warranty for failures caused by normal operaon
according to the manual. Improper use of the product and man-made damage
are not covered by the warranty.
●To replace the product; it needs to be packaged completely.
●The warranty is limited to the value of the pump.
●Damages to the Coolado tPump caused by, but not limited to: abuse,
abnormal operaon, water damage, non- advised power supply, high
temperatures, motor burn caused by high-voltage power supply, All man-
made damage. Self-disassembly and accidental damage, damages caused by
force majeure are not covered by the warranty.
●The liability of Coolado will ALWAYS be limited to the value of the pump.
●Coolado will not be liable for damages to persons and / or property.
On our website you can find this manual in mulple language.
Scan this QR Code or go to our website hps://www.coolado.com/manuals