Cooper & Hunter SPWT-A01 User manual
Preface
Safety Instructions
Description
Basic Functions
Mode
Operation
Temperature
Humidity
Fan
Louver
Additional Functions
Health
ECO
Sleep
Self-cleaning
Electric Heater
Quiet
Nature Wind
Wind Free
Timer
Other Displays
Human Sense
1
1
3
4
4
5
6
6
7
7
13
14
15
16
17
18
19
20
21
22
26
27
Wired Remote Controller
Model : SPWT-A01
Operation Manual
Content
Thank you for choosing C&H commercial air
conditioner!
Please read this manual carefully before using the
wired remote controller for a proper operation, and
keep it properly.
Should you have any questions, please contact with
the dealer or our service center.
Lock
24
Please use this product properly after carefully
reading this chapter
Items in this chapter are identified as Warning .
Serious consequences that may result from
mis-operation are listed, and important safety-
related contents are given, please be sure to
observe!
Please keep this manual properly after reading
for reference at any time.
Symbols
Attention
Shortcut
indicates issues need attention.
helps to facilitate your operation.
indicates a reference page.
indicates mis-operation, which may
result in serious injury or death.
indicates prohibitions.
indicates mandatory items and
guidance for the actions of unspecific
general users.
Warning :
Installation · Electrical Construction
For installation, please entrust the distributor or the professional installation personnel.
Installation by customers themselves may lead to water leakage, electric shock, a fire, unit
falling and other injuries.
Electrical constructors must be qualified for construction. Please entrust qualified distributors
for construction.
Installation by customers themselves may lead to electric shock, a fire and other accidents.
Warning
When using medical devices and other devices
that produce electromagnetic waves, please do not
install the wired remote controller directly facing to
the transmitting surface of the electromagnetic
wave for preventing misoperation of the wired
remote controller.
In order to prevent the electromagnetic wave
propagating in the air from affecting the wired
remote controller, please place the devices that
can produce electromagnetic waves, or radio
transmitter and the like 9.84ft(3m) away from the
wired remote controller.
This is a universal controller, some of the functions have
to depend on the air conditioning systems. Connecting with
some certain types of air conditioners may voids part of the
functions given in this manual. Please contact your
distributor for details.
Do not install this product in the following places, or the keys
of remote controller will break down easily.
Places where oil (including machinery oil) sprays;
Places where a lot of sulfide gas drifts such as in hot
spring;
Places where inflammable gas may generate or flow to;
Places where strong salty wind blows such as coastal
regions;
Places with an atmosphere of acidity or alkalinity.
Preface
Safety Instructions
In Operation
Please do not operate the controller with wet hands, which may lead to
electric shock.
Please turn off the main power immediately when the safety device starts
repeatedly or the operation key acts abnormally.
Due to the possibility of electric leakage or overcurrent, accidents such as
electric shock, a fire and explosion may occur. Please contact the distributor
or our designated service center.
In case of abnormality (smell of burning, etc.), please stop operation
immediately and cut off the main power supply. Operation under abnormal
conditions may lead to failure, electric shock, a fire and other accidents.
Please contact the distributor or our designated service center.
Strictly prohibit the ingress of water during maintenance. Otherwise it may
lead to electric shock.
Do not alter the electrical wiring without permission, which may lead to major
accident.
Do not cut off the power supply within 3 minutes after pressing the key of the
controller, which may lead to misoperation.
Other Warnings and Precautions
Servicing · Relocation
Please contact the distributor or our designated service center for
servicing of the air conditioner units.
Improper servicing or installation may lead to electric shock, a fire and
other accidents.
Please contact the distributor or our designated service center for servicing
or relocation of the controller.
Improper servicing or installation may lead to electric shock, a fire and
other accidents.
Warning
Warning
Warning
Safety Instructions
3
Description
All the indications are listed for illustration, the
actual display during operation is different.
●Please tap screen with finger.
Do not touch the screen with objects with
sharp edges, or the screen may be damaged.
A. Operation Buttons
Mode
Fan
Temperature“+”
Function
Timer Louver
B. Display on LED
Temperature“-”
ON/OFF
Operation modes: "Fan" "Cool"
Louver
3D outlet
Ultra-far
Set temp/humidity/room temperature
Timed power-on/off
Check
Service code
Quiet
Health
ECO
Sleep
Self-cleaning
Boost
Electric heater
Nature wind
Test run
Filter
Centralized controller
Defrosting
3
2
1
34
33
32
35
36
37
38
39
8
7
6
5
4
22
21
20
23
24
25
26
27
28
29
30
31
9
"Dry" "Heat" "Auto"
10
Fan
11
12
13
14
15
16
17
18
19
On-site setting system address
Wind-free
Alarm
Lock
11
Display
43
8
15
6
2
Attention
7910
Reset
OK
12
13
14
15
Humn sense
16
Hot start
No function
17
18
19
20
21
Room/Set temp
22 23 24 25
26 27 28 29 30
31 32 33 34
35
36 37 38 39
4
Basic Functions
Mode
1
Preparation
Switch on.
Power supply shall be available
before operation to protect
compressor.
LCD is as shown on the right when
energized.
Do not cut off power supply in
operation season.
Press
to select operation
mode. Each press of the button,
the operation mode will switch as
the following sequence.
Only units with Cool and Heat functions for shop/office and VRF with Cool
and Heat functions for building are capable of heating. Those with cooling
function only are not capable of heating.
When connected with total heat exchanger, only air supply mode will display. Please contact the dealer for details.
When connected with double-source indoor units, FAN and HEAT display. Please contact the dealer for details.
Wired remote controller will display dry or auto-dry according to the actual condition that whether the connected
ducted type indoor units have equipped with humidity sensor or not.
For the mode described in Item 1 will be skipped automatically when it is unavailable or the connected unit type
does not support.
When connected a indoor unit with 3-Level dry, the wired remote controller can display three different levels of
dry operation: standard, C- Dry and S-Dry. Please contact the dealer for details.
5
Temperature
Start
Stop
Press『 』
The operation li up and the
unit starts running.
1
In usual mode, each press of
『 』will increase the temperature by
1℉. And rapid switching can be realized by
holding this button.
Press『 』
The operation goes out and the
unit stops.
Once heating operation is stopped, the indoor unit will supply air for around 2 minutes.
Operation
6
2
2
1
Each press of『』will increase the
humidity by 1% (max. 90%). And rapid
switching can be realized by holding
this button.
Auto-Dry mode is valid only when such function is available in the indoor unit. Please contact
the dealer for details.
When connected a dehumidifier with 3-level Dry, the left lower corner shows target humidity value in
Dry mode, and only temperature value can be adjusted. Please contact the dealer for details.
Room temperature can be displayed after special setting on controller. Please contact the
dealer for details.
In usual mode, each press of
『 』will decrease the temperature by
1℉. Rapid switching can be realized by
holding this button.
Each press of『』will decrease the
humidity by 1% (min. 35%). Rapid
switching can be realized by holding
this button.
Temperature
Humidity
7
1
Fan
Louver
1
Air volume is adjustable during Dry operation, but it is defaulted at Low by indoor unit.
Depending on the types of connected indoor units, Auto mode can display when controlling
certain indoor units by wired remote controller. Please contact the dealers for details.
AUTO can be set only when this function is available in the indoor unit.
Louver will not display when connected with an indoor unit without louver.
Louver setting when connected with common 4-way cassette type indoor units.
Press『』to start up the unit.
Press『』 to set louver direction.
Each press of the button will adjust
the direction as the following
sequence.
Press『』to set air volume.
Each press of the button the adjust the air
volume as the following:
6-level:
(Breeze → SL→ L → M → H → SH → AUTO)
4-level:
( L → M → H → AUTO )
( L → M → H → SH → AUTO)
3-level:
Attention
8
Louver
1
Press『』to start up the unit.
Press『』 to set louver direction.
Each press of the button will adjust
the direction as the following
sequence.
Options of louver setting may vary along with the types of indoor units. Please refer to the
manual of indoor unit for details.
When the louver is in operation, location display on LCD may not exactly match with the
actual location.
Sometimes the louver may not stop immediately after pressing the key.
Louver setting when connected with 3D panel
2
When and is selected and flashing,
Press『 』 and vertical louver
swings or changes the angle at stop.
Each press of the button the vertical
louver will display in a flashing
manner as the following sequence.
Press『』and vertical louver will
display in a reverse manner of the above
sequence.
When flashes for 10s, the blades
move and vertical louver starts to swing.
When other icons flash and stop after
10s, vertical louver stops at set location.
9
3
When is selected and flashing,
Press『 』 and horizontal louver
swings or changes the angle at stop
Each press of the button the
horizontal louver will display in a
flashing manner as the following
sequence.
4
When is selected, it flashes
for 10s then keep ON.
Horizontal and vertical louvers are
in swing mode at present.
5
When is selected, it flashes for
10s then keep ON.
Louvers do not display at present.
『 』
When flashes for 10s, the blades
move and horizontal louver starts to
swing. When other icons flash and stop
after 10s, horizontal louver stops at set
location.
Louver
10
1
Press 『 』to start up.
Press『 』to set louver direction.
Each press of the button will adjust the
direction as the following sequence.
2
When is selected and flashing,
Press『 』 and vertical louver
swings or changes the angle at stop.
Each press of the button the vertical
louver will display in a flashing
manner as the following sequence.
Press『』and vertical louver will
display in a reverse manner of the above
sequence.
When flashes for 10s, the blades
move and vertical louver starts to swing.
After other icons flash for 10s and stop,
vertical louver stops at set location.
Louver setting when connected with 1-way cassette type or kitchen indoor units.
Louver
11
4
3
When is selected and flashing,
press『 』and horizontal louver
swings or changes the angle at stop.
Each press of the button the
horizontal louver will display in a
flashing manner as the following
sequence.
Press『』and horizontal louver will
display in a reverse manner of the above
sequence.
When flashes for 10s, the blades
move and horizontal louver starts to
swing. After other icons flash for 10s and
stop, horizontal louver stops at set
location.
When flashes for 10s, the icon
keeps ON.
Horizontal and vertical louvers are
both in swing mode at present.
Louver
12
2
1
Press『』to start up.
Press『 』 button, to select unified or
Press『』and icons of louvers will display
in a reverse manner of the above sequence.
『』and by each press of the
button the louvers will display in a flashing
manner as the following sequence.
Louver setting when connected with K3 4-way and K3 2-way cassette type indoor units.
Louver
K3 4-way
K3 2-way
Press
When is selected and flashing,
separate control of the louver.The control
mode is switched as the following sequence
at each press of the button.
13
Additional Functions
1
If an indoor unit without any additional functions is connected in,
"N.A. (non-applicable)" will display when pressing『』button.
2
Press『』to start up the unit.
Press『 』 to set additional
functions, and the selected
additional function flashes. When
icon of additional function is
flashing, press『 』to switch.
Each press of the button the icons of
additional functions will display as the
following sequence.
When icon of additional function is
flashing, press『』to select the
Attention
additional function, press ,
to cancel the additional function.
『』
14
1
The icon of Health does not display when connected with an indoor unit
without this function.
2
Press『』to nter additional function
setting interface.
Press『to switch to Health, if
the icon of Health flashes it is in setting
state.
When Heath function is in setting state，
if it hasn't been set before, this function
will be valid by pressing .
『』
If it has been set, the function will be
canceled by pressing .
『』
When the unit is switched from ON to OFF, the Health mode is canceled.
When operation mode is changed, the Health function does not cancel.
When the unit is OFF, the User can set if Health function will be auto-on or off
when starts up by holding『』for over 5s.
Health
Attention
』
15
1
The icon of Sleep does not display when connected with an indoor unit without
this function. Sleep function invalids when temperature or air volume is
restricted.
2
When Sleep function is in setting state, if
it hasn't been set before, this function will
be valid by pressing button.
『
』
S
S
S
S
S
S
Sleep
Press『』
to select Sleep，
if the icon of Sleep flashes it is in setting
state.
Attention
Press『』to enter additional function
setting interface.
If it has been set, this function will be
canceled by pressing
『』
.
16
1
The icon of Quiet does not display when connected with an indoor unit
without this function. Quiet may be invalid when air volume is restricted.
2
Press『』to enter additional
function setting interface.
Press『』to switch to Quiet
and if it flashes it is in setting state.
When Quiet is in setting state, if it hasn't
been set, this function will be valid by
pressing 『』
button.
If it has been set, this function will be
canceled by pressing .
『 』
When setting to Quiet by remote controller, the air volume remains
at current level and non-adjustable. Indoor unit will set volume.
Quiet mode is canceled when the air conditioner is switched OFF.
Quite mode is canceled when operation mode is changed.
Quiet
Attention
17
1
The icon of ECO does not display when connected with an indoor unit without
this function. ECO is not available when air volume or temperature is
restricted, and if ECO function has been set, the function will be canceled
automatically by then.
2
Press『』 to enter additional function
setting interface.
Press『』to switch to ECO, if
the icon of ECO flashes it is in setting
state.
When ECO is in setting state, if it hasn't
been set before, this function will be valid
by pressing
『
』.
If it has been set, this function will be
canceled by pressing
『 』.
When setting ECO function by wired remote controller, set air volume and temperature
are non-adjustable. Indoor unit will set air volume and temperature automatically.
ECO mode is canceled when the air conditioner is switched OFF.
ECO mode is canceled when the operation mode is changed.
ECO
Attention
18
1
The icon of Electric Heater does not display when connected with an
indoor unit without this function.
2
Press『 』to enter additional function
setting interface.
Press『』to switch to Electric
Heater, if the icon of Electric Heater
flashes it is in setting state.
When Electric Heater is in setting state, if it
hasn't been set before, this function will be
valid by pressing .
『
』
If it has seen set, this function will be
canceled by pressing .
『 』
Electric Heater is available only in Heat mode.
Electric Heater is canceled when the air conditioner is switched OFF.
Electric Heater is canceled when the operation mode is changed.
This function is not available when connected with an indoor unit without electric heater.
Electric Heater
Attention
19
1
Icon of Nature Wind does not display when connecting with an indoor unit without
this function. Nature Wind may be invalid when air volume is restricted.
2
Press『』to enter additional function
setting interface.
Press『』to switch to Nature
Wind, and if it flashes it is in setting state.
When Nature Wind is in setting state, if it
hasn't been set, this function will be valid
by pressing
『 』.
If it has been set, this function will be
canceled by pressing
『』.
Nature Wind is available only in Cool mode.
Nature Wind is canceled when the air conditioner is switched OFF.
Nature Wind is canceled when the operation mode is changed.
When setting Nature Wind, both set air volume and direction are non-adjustable, indoor
unit will take control over the air volume and direction.
When connected with an indoor unit has Nature Wind function and equipped with 3D
panel, once it is set to Nature Wind, the louver will be in swing state.
Attention
Nature Wind
Other manuals for SPWT-A01
1
Table of contents
Other Cooper & Hunter Remote Control manuals
