ASSEMBLY TYPE
NNew Construction / Chicago Plenum
LAMP WATTAGE / TYPE
075P30 75 Watt Max. PAR30 120V
039M30 39 Watt PAR30 Metal Halide
070M30 70 Watt PAR30 Metal Halide
POWER SUPPLY
EElectronic Ballast
NNone - Line Voltage Lamp
PRIMARY VOLTAGE
1120 Volts
2277 Volts
ELECTRICAL PLATFORM FINISH
BBlack Powder Coat
WWhite Powder Coat
SIndustrial Silver Powder Coat
COMBOLIGHT RECESSED - NEW CONSTRUCTION
CONFIGURATION CODE
C1 C2 C3 C4 C5 C6 CX
One
Lamp
Two
Lamps
Three
Lamps
Four
Lamps
Five
Lamps
Six
Lamps
Four
Lamp SQUARE
HOUSING
COMBOLIGHT RECESSED - NEW CONSTRUCTION
COMBOLIGHT RECESSED - NEW CONSTRUCTION
LAMP QUANTITY / CONFIGURATION
C1 One (1) Light Housing
C2 Two (2) Light Housing
C3 Three (3) Light Housing
C4 Four (4) Light Housing
C5 Five (5) Light Housing
C6 Six (6) Light Housing
CX Four (4) Light SQUARE Housing
HOUSING CONSTRUCTION
NNew Construction
CChicago Plenum
LAMP WATTAGE / TYPE
075P30 75 Watt Max. PAR30 120V
039M30 39 Watt PAR30 Metal Halide
070M30 70 Watt PAR30 Metal Halide
POWER SUPPLY
EElectronic Transformer / Ballast
NNone - Line Voltage Lamp
PRIMARY VOLTAGE
1120 Volts
2277 Volts
NOTE: De-rated wattage labeling available.
TRIM INSERT
T0.75” Trim Flange
NTrimless (no flange)
GIMBAL MECHANISM
GStandard Double Gimbal
RRetractable Arm Double Gimbal
INTERIOR / GIMBAL / TRIM SLEEVE FINISH
BBlack Powder Coat
WWhite Powder Coat
SIndustrial Silver Powder Coat
TRIM FINISH
BBlack Powder Coat
WWhite Powder Coat
SIndustrial Silver Powder Coat
NNone (Trimless)
NOTE: Housing Interior, Gimbals and Inner Trim Sleeve share the same finish.
Custom combinations are available upon request. Consult factory for special
finish specifications.
LAMP GROUP / TRIM INSERT (see page 5 for explanation)
4T Lamp Group 4 - 0.75” Trim Flange
4N Lamp Group 4 - Trimless (no flange)
GIMBAL MECHANISM
GStandard Double Gimbal
RRetractable Arm Double Gimbal
INTERIOR / GIMBAL / TRIM SLEEVE FINISH
BBlack Powder Coat
WWhite Powder Coat
SIndustrial Silver Powder Coat
TRIM FINISH
BBlack Powder Coat
WWhite Powder Coat
SIndustrial Silver Powder Coat
NNone (Trimless)
HOUSING CONSTRUCTION
NNew Construction
CChicago Plenum
HOUSING GROUP SIZE (see page 5 for explanation)
3Housing Group 3
PRIMARY VOLTAGE
1120 Volts
2277 Volts
HOUSING FINISH
BBlack Powder Coat
WWhite Powder Coat
SIndustrial Silver Powder Coat
Component Ordering
Specify housings, electrical assemblies or lamp assemblies as separate line items to enable “quick-ship”.
Complete Fixture Ordering
Specify complete fixtures in one ordering number.
The configuration code should precede
each component number. Choose your
configuration and add the code to the
beginning of each housing, electrical or
trim insert part number to indicate lamp
quantity and configuration.
By following the steps below, you may specify a complete
COMBOLIGHT fixture including housing, electrical and
trim insert in one complete number. Numbers are built
using sub-sets of the component numbers from the
previous page.
ELECTRICAL
TRIM INSERT
2B
2A
1A
3A
3B
3C
3D
1B
1C
1D
2C
2D
2E
WITH TRIMLESS INSERT
WITH 0.75” TRIM INSERT
Trim Flange is 0.75”
Trimless Meshplate is 3.15”
NEW CONSTRUCTION - Dimensions in inches
Config. A B C D E F G
C1 16.14 7.19 12.01 5.69 15.01 7.19 5.69
C2 21.83 12.88 17.70 11.38 15.01 7.19 5.69
C3 27.52 18.57 23.39 17.07 15.01 7.19 5.69
C4 33.21 24.26 29.08 22.76 15.01 7.19 5.69
C5 38.90 29.95 34.77 28.45 15.01 7.19 5.69
C6 44.59 35.64 40.46 34.14 15.01 7.19 5.69
CX 22.88 12.88 18.74 11.38 22.82 12.88 11.38
NOTE: Housing finish (1C) should match interior finish (3C).
Consult factory for special finish specifications.
NOTE: Electrical platform finish (2E) should match Housing
finish (1C). Consult factory for special finish specifications.
NOTE: Housing Interior, Gimbals and Inner Trim Sleeve share
the same finish. Custom combinations are available upon
request. Consult factory for special finish specifications.
PAR30
120V
PAR30
METAL
HALIDE
1
2
3
• 0.75” trim ange or trimless
• 45º x 45º lockable aiming
• Gimbals are interchangeable
• Two-position gimbal mounting provides
optional 1” regress
• Threadless lamp bezels
• Spring-loaded lamps and accessories
• Optional retractable arm
• Individually removable for easy maintenance
• Integral electronic metal halide ballasts
• Quickconnect wiring
• Includes lamp sockets
• De-rated wattage labeling available
• Lightweight frameless construction
• Integral electrical enclosure with through
branch wiring access
• Buttery brackets for commercial
applications
• Hidden vent holes for cooler operation
• One or two circuit
• Integral thermal protection
Ordering Example (Precede with Configuration Code)
Four (4) Light Insert with Trim Flange, Double Gimbals,
Black Interior / White Trim Finish C4 4 T G B W C4 N 039M30 E 1 T G B W
Ordering Example
Four (4) Light 39W PAR30MH COMBOLIGHT New Construction, Electronic Metal Halide Ballasts
120V Primary, Trim Flange Insert, Double Gimbals, Black Interior Finish, White Trim Finish
Ordering Example (Precede with Configuration Code)
Four (4) Light COMBOLIGHT Recessed, New Construc-
tion Housing Component, 120V, Black Finish C4 N 3 1 B
Ordering Example (Precede with Configuration Code)
Four (4) Light 39W PAR30MH Electrical Component,
Electronic Metal Halide Ballasts,120V Primary, Black C4 N 039M30 E 1 B
