
Coin Sorter and Counter G076 Instructions for Use
Please read and retain these instructions for future reference v001: 10/06/19
To install or replace the batteries
1. Remove the top cover from the Coin Sorter and Counter.
2. Remove the screw in the battery cover.
3. Insert 2x AAA batteries in the battery compartment, observe polarity as indicated (+/-).
4. Secure the battery cover with the screw.
To operate
1. Insert coins into the coin slot; the inserted coins will descend into the correct tube automatically.
2. To empty the coin sorter:
a) Adjust the top cover of the coin sorter to match the coins.
b) Remove the coins from the coin tubes.
IMPORTANT
The coin tubes and their housing are marked with the numbers 1 to 8. You can see this on the base of
the coin tubes and the coin tube housings. Please insert the coin tubes into their corresponding
housings.
A black arrow sticker near the battery compartment indicates the locating notch on the body and it
should click into place. If the black arrow and the locating notch are not aligned and it does not click into
place then the coins will not fall into the correct coin tubes.
Do not overfill the coin tubes.
The two AAA batteries required to operate the coin sorter are not included.
BATTERIES
•Keep batteries away from children and pets.
•Do not mix used and new batteries.
•Install batteries in accordance with its polarity symbols (+/-).
•Remove the batteries if left for long periods.
•Never dispose of batteries in a fire.
•Battery disposal, spent or expired batteries must be properly disposed of and recycled in compliance
with local regulations. For detailed information, contact your local authority.
•Follow the battery manufacturer’s safety, usage, and disposal instructions.
DISPOSAL
•Dispose of all packaging, paper, cartons, plastic and plastic bags in accordance with your local recycling
regulations.
•At the end of the product’s lifespan please dispose of it at an authorised household WEEE waste
recycling centre.