Coopers RCP-A1 User manual

Instructions
A. For tyres of cars,
motorcycles, etc:
1. Plug the cigarette lighter
into car 12vDC socket.
2. Screw the valve connector
clockwise onto the tyre valve
stem. Make sure the
connection is well made.
3. Set the target pressure
value (please refer to: How
to Use Digital Gauge).
4. Press On/Off, the device
starts to work.
5. The device will stop
working automatically when
reaching the preset value.
6. Release On/Off.
7. Remove and store the air
hose in the storage
compartment provided.
B. For air mattress, footballs,
children play raft, etc:
1. Select the proper adapter and insert
into the Connector.
2. Insert the connected adapter into the
appropriate receiver on the inflatable.
3. Follow the same steps as instruction A.
4. Check for proper firmness and adjust as
needed.
5. Remove the adapter from the
Connector.
C. The LED light has 3
functions:
1. Turn the knob to LIGHT, the light is for
illuminating a work area.
2. Turn the knob to FLASH, this function is
to alert other road users to a potential
hazard.
3. Turn the knob to SOS, the light will flash
the SOS distress signal.
LED Lights
Digital Tyre
Guage
Stem
ON/OFF
Lights
Switch
Air
Hose
Portable Tyre Air Compressor User Manual
Adaptor for
sports ball
Adaptor for air
mattress and raft
Cigarette Lighter
Connector
M(1) Switch units of pressure among Bar,
KPA and Psi.
(2) Release the gauge from measuring status to
reading status.
Instruction
1. Presetting the target value
(1) Hold + or - for more than 5 seconds
until LCD display flashes. This figure is the
previous pre-set value (default: 30Psi).
Press + or - until the value is set to the
new target pressure level, and wait 2-3
seconds. The LCD will display the current
pressure value.
(2) Press M, the LCD displays "ON" this
indicates the device is ready to start working.
+Increase preset pressure.
-Decrease preset pressure .
ON/OFF Switch off the device
How to Use Digital Gauge
2. Inflating:
Press ON/OFF, the device starts to work until
the target pressure is reached. The device
automatically switches off and LCD displays
"OFF".
Note: In case of emergency the device can be
manually switched off during use.
3. Inflating other items:
(1) If other items require a different pressure
value, repeat the steps mentioned above.
(2) If other items require the same pressure
value as has already been preset, press M and
then ON/OFF, and the device works again.

Please read, understand and follow
the instructions provided with this
device. The user must have an
understanding of the product and
its safe operation before use.
The Portable Tyre Air Compressor is a
multifunction compressor, designed for
cars, motorcycles, bicycles, rafts, air
mattresses and sports balls is very easy
to operate. With the digital pressure
gauge, you preset the target pressure
and the unit will automatically turn off
when the target pressure is reached.
Caution
1. Inspect before each use. Do not use if
bent, broken cables are showing heat
damage, burnt or otherwise damaged
components are seen.
2. Check the tyre pressure before inflating
and never exceed rated pressure of the item
being inflated. If rated pressure is exceeded,
the item being inflated may over inflate and
be damaged.
3. Do not bend the air hose while the device
is working.
4. Never turn off the car engine when the
device is working, otherwise the car battery
may run down.
5. Do not use continuously for more than 30
minutes. When 30 minutes is reached, turn off
and let it cool for 15 minutes before using it
again.
6. If the device is making an abnormal sound
or its temperature is too high, turn off the
power at once and let it cool for at least 30
minutes before trying again. Improper use will
result in damage to the device.
7. Do not leave device operating whilst
unattended, and keep out of the reach of
children.
8. Store the device in it’s case in a dry place
whilst not in use.
9. This device contains a DC motor and
components which may arc during normal
operation. Do not use near to flammable
liquid or gas/petrol vapour.
10. Never put the connector and adapters into
mouth, ear or eyes, this is not a toy.
Warning
1. Always use the device according to the
instruction for the sake of your safety. Other
ways of use not mentioned in the manual may
result in injury.
2. No alterations shall be made to this device.
Only adapters supplied by the manufacturer
shall be used.
3. If vehicle fuse is blown, only replace with
fuse of identical rating.
Specifications
1. Power Supply: 12 VDC
2. Full load draw: 10A
3. No load draw 5A
4. Working capacity: takes less than 5
minutes 30 seconds to inflate a 205/70R14
tyre from 0 to 36 Psi
5. Measurement range: 0.5-120 Psi
6. Measurement accuracy: +1 Psi –1 Psi
7. Power cord length: Aprox. 3.2m
8. Air hose length: 600mm
9. Operation temperature: -20° to 60°
10. Dimension: 185x176x77mm
11. Weight: 1.1Kg
Portable Tyre Air Compressor User Manual Portable Tyre Air Compressor
User Manual
(Model RCP-A1)