Coopers 8829 User manual

Total Body Exerciser Cycle 8829 Instructions for Use
Please read and retain these instructions for future reference v002: 13/03/17
PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Parts List
4x Bolts for pedals/handlebar
2x Foot bar
1x Plastic sleeve
4x End Caps
2x Tension control knobs
1x Frame
1x Screw for plastic sleeve
2x Foot Pedals
4x Nuts for foot bar
1x Upper tube
2x Locking nuts
2x Handlebar pedals
4x Bolts for foot bar
1x Lower tube
2x Bolts
Fit plastic cap onto
each end of the foot
bars.
Secure the foot bar to
the frame. Using nuts
and bolts supplied.
Place the two
bearings around the
steel pedal rod with
the metal tension
piece fitting in the
groove.
Slide the bearings and
steel rod into the
bearing case.
Tighten down the
tension control knob
before putting on the
pedals.
Push pedal onto the
steel rod. Tighten
bolts with the Allen
key.

Total Body Exerciser Cycle 8829 Instructions for Use
Please read and retain these instructions for future reference v002: 13/03/17
Push the second
pedal onto the steel
rod and tighten bolt
with the Allen key.
Repeat steps A to E to
assemble the
handlebar pedals.
Assemble the lower
upright tube to the
base unit using the
locking nuts and bolts
supplied.
Put the upper into the
lower tube, and slot
black plastic sleeve
on. Adjust to correct
height and tighten
screw before use.
Turn tension knob to
adjust the resistance
of the pedals for easy
or harder pedalling.
WARNING:
Do not over tighten the tension knob. Do not use tools to tighten. Damage may occur to the bearing case if
over tightened.
Surface around the tension knob and crank bearings may get hot if used continuously for 20 mins. Please
stop and allow to cool before re-use.
CAUTION:
Please remember the Exerciser is for use when sitting.
Do not stand or place your weight over the top portion of the Exerciser.
Always use the foot straps when pedalling.
Maximum pedal force of 80Kg
Warning! Surface around the tension knob and crank bearings may get hot if used continuously for 20 mins.
Please stop and allow to cool before re-use.
DISPOSAL:
•Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your local recycling
regulations.
•At the end of the product’s lifespan please dispose of it at an authorised household waste recycling centre.