COP Security 15-PS084 User manual

8 port 10/100Mbps
with 4 Port PoE Switch
User’s Manual
FCC Warning
This device has been tested and found to comply with limits
for a Class A digital device, pursuant to Part 15 of FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates and radiates radio frequency energy and, if not
installed and used in accordance with the user’s manual, it
may cause interference in which case users will be required
to correct interference at their own expenses.
CE Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the user
may be required to take adequate measures.
Introduction
This switch provides 8 10/100M ports. It was designed for
easy installation and high performance in an environment
where traffic is on the network and the number of users
increases continuously.
The compact rigid desktop size was specifically designed for
small to medium workgroups. It can be installed where space
is limited; moreover, it provides smooth network migration
and easy upgrade to network capacity.
Package Contents
Before you start to install this switch, please verify your package
that contains the following items:
zOne PoE Switch
zOne adapter
zOne Power Cord
zOne User’s Manual
Note: If any of these items is found missing or damaged, please
contact your local supplier for replacement.
Product Features
zProviding 8 Port s of 10/100Mbps TX switching ports
zComplying with IEEE 802.3 10Base-T, IEEE 802.3u
100Base-TX,
zSupporting the flow control: back pressure for Half-duplex
and IEEE 802.3x for Full-duplex mode
zAll ports support Auto-MDIX function
zBeing dedicated 2000Mbps Full-duplex bandwidth to the
each port
zBroadcast storm control and supporting store & forward
operation
zNon-blocking & Non-head-of-line blocking full-wire speed
forwarding
zAuto-learning networking configurations
zBuilt-in 1024 MAC learning table, 96K byte buffer memory
zFiltering/Forwarding Rate:
100Mbps/148,800pps;10Mbps/14,880pps
zSupports packet length 1522 bytes/ Maximum 1536 bytes
zJumbo frames: 9K
zStatus LEDs: System Power, 10/100M Link/Activity and
PoE/PSE on line
zNetwork Transmission Media: 10Base-T Cat. 3, 4, 5
UTP/STP; 100Base-TX Cat. 5 UTP/STP
zExternal Power supply: DC 48V input
zOperating Temperature: 0℃~ 60℃
zStoring Temperature: -20℃~ 40℃
zHumidity: 10% ~90% RH (Non-condensing)
zDimension (L x W x H): 141mm x 94 mm x 31mm
zTotal Power Supply : 65Watt
zWeight: 371g
zSafety & EMI Certificates: CE & FCC
zSmart plug & play

Front Panel (LEDs)
LED Indicators of 8 Port with 48V-in 10/100M Switch
LED Status Description
On Power is on. Power
Off Power is off.
On Port is for connection.
Off No connection.
LINK/ACT
Flashing Data is transmitting or receiving
Rear Panel (Power)
DC 48 input
Technical Specifications
Standards IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3af PoE
Features Number of Ports:
8 10/100BaseT with RJ-45
Connector
4 PSE Ports with RJ-45 Connector
Data Transfer
Rates Ethernet :10M/Half-Duplex 20M/Full-Duplex
Fast Ethernet: 100M/Half-Duplex
200M/Full-Duplex
Transmission
Media 10BaseT Cat. 3, 4, 5 UTP/STP 100BaseTX Cat. 5 UTP/STP
LED
Indicators Per Port: (TX): 10/100M Link/Act PoE, Per
Unit: Power
Power
Supply’ 65 Watts
Power supply 48V-56 DC input
Dimensions 141 x 94 x 31mm (L x W x H)
Weight 371g
Operating
Temperature 0 to 40℃
Storage
Temperature -20 to 90℃
Humidity 10 to 90% RH (non-condensing)
Certifications FCC Class A, CE