Coppernic ID Platform FAP50 User manual

ID Platform FAP50
Quick Start and Regulatory Guide
QSG 200055 A00
| Non-Contractual Picture |

•The items supplied with the device and any available accessories may vary depending on the region.
•The supplied items are designed only for this device and may not be compatible with other devices.
•Appearances and specifications are subject to change without prior notice.
•Additional accessories can be purchased from your local COPPERNIC retailer.
•Using unapproved accessories may cause the performance problems and malfunctions that are not covered by
the warranty.
AVAILABILITY OF ALL ACCESSORIES IS SUBJECT TO CHANGE.
ID Platform FAP50
Quick Start and Regulatory Guide
QSG 200055 A00
SAFETY PRECAUTIONS
Page 02 | 13

QSG 200055 A00
ID Platform FAP50
Quick Start and Regulatory Guide
WHAT'S IN THE BOX ?
DEVICE
NOTICE
BOX
1
2
3
PLUGS : EU | UK | US
CABLE MICRO USB C | USB A
POWER JACK CABLE
4
5
6
TEST REPORT
7
1 2 3
4
765
Page 03 | 13

PRODUCT OVERVIEW
ID Platform FAP50
Quick Start and Regulatory Guide
QSG 200055 A00
front camera
(2nd generation only)
fingerprint sensor
FAP50
NFC
antenna area
light sensor
charge indicator
| Non-Contractual Pictures |
LED flash
loudspeaker
LED flash
rear camera
IR led IR led
iris scanner
Page 04 | 13
battery cover

PRODUCT OVERVIEW
ID Platform FAP50
Quick Start and Regulatory Guide
QSG 200055 A00
USB-C service port
volume keys +/-
function key
configurable
USB-A host port
9V/2,5A power jack cable (1st generation)
12V/2,5A power jack cable (2nd generation)
micro sim card slot
micro sd card slot
micro sam slot
audio jack
SIDE VIEW #01
SIDE VIEW #02
SIDE VIEW #03
power key
Page 05 | 13
| Non-Contractual Pictures |

ID PLATFORM IS EQUIPPED WITH A 5 POINTS MULTITOUCH GFF SENSOR TYPE.
•Do not allow the touchscreen to come into contact with other electrical devices
•Electrostatic discharges can cause the touchscreen to malfunction
•To avoid damaging the touchscreen, do not tap it with anything sharp or apply excessive pressure to it with your
fingertips.
•The device may not recognize touch inputs close to the edges of the screen, which are outside of the touch input area
•It is recommended to use fingers or dedicated touch stylus when using the touchscreen
ID Platform FAP50
Quick Start and Regulatory Guide
QSG 200055 A00
TOUCHSCREEN RECOMMENDATIONS
Page 06 | 13

ID Platform FAP50
Quick Start and Regulatory Guide
QSG 200055 A00
Setting up your device
CAUTION
ID Platform FAP50 can accommodate only one type of removable battery.
Charge the BATTERY
1. 12.000 mAh battery should be charged ONLY with the provided charger.Damage occurring when using another
charger will not be covered by the warranty.
2. The charger is connected to the tablet.
3. Battery charge is using QUALCOMM patented Quick charge algorithm.
4. Charging current can be up to 3A (1st generation) | 5A (2nd generation) but will depend on battery state of charge and
device temperature.Hot environment or extensive operation may slow down the charge.
Page 07 | 13

Setting up your device
MICRO SD card installation
NOTE
Micro SD cards up to 128GB (1st generation) or 256GB (2nd generation) can be used with the ID Platform (not included)
•To insert the Micro SD card, please remove the side door.
•Insert carefully the Micro SD card as shown into the slot with the gold contacts facing up.
•Insert the memory card all the way until you hear a locking sound.
•To remove the Micro SD card, press against the edge of the memory card and release it gently.
ID Platform FAP50
Quick Start and Regulatory Guide
QSG 200055 A00
Micro SD card
Page 08 | 13

Setting up your device
MICRO SIM card installation
•To insert the Micro SIM card, please remove the side door.
•Insert carefully the Micro SIM card as shown into the slot with the gold contacts facing up.
•Insert the Micro SIM card all the way until you hear a locking sound.
•To remove the Micro SIM card, press against the edge of the card and release it gently.
•Then, follow instructions on the screen.
ID Platform FAP50
Quick Start and Regulatory Guide
Micro SIM card
Page 09 | 13
QSG 200055 A00

Setting up your device
MICRO SAM installation
•To insert the Micro SAM, please remove the side door.
•Insert carefully the Micro SAM as shown into the slot with the gold contacts facing up.
•Insert the Micro SAM all the way until you hear a locking sound.
•To remove the Micro SAM, press against the edge of the card and release it gently.
•Then, install the dedicated applications to use this Secure Element.
ID Platform FAP50
Quick Start and Regulatory Guide
Micro SAM card
Page 10 | 13
QSG 200055 A00

Setting up your device
Audio
•Wired headset (microphone + stereo earpieces) can be used with the ID Platform
•Headset with CTIA 3.5mm jack should be used
•ID Platform is also compatible with any type of wireless BT 4.x accessories
ID Platform FAP50
Quick Start and Regulatory Guide
insert headset jack here
Page 11 | 13
QSG 200055 A00

ID Platform FAP50
Quick Start and Regulatory Guide
Using your device
TURNING ON | TURNING OFF your device
Power On | Press and hold during 3 sec. the power button.
Power Off | Press and hold during 3 sec. the power button and select “Power off” in the dialog box.
Reboot | Press and hold during 3 sec. the power button and select “Reboot” in the dialog window to restart the
device.
Suspend Mode | Press and release the power button to place the device in suspend mode. The display will be off
and go into a low power state to conserve battery power.
Reset | Press and hold the power button during 13 sec.
power key
Page 12 | 13
QSG 200055 A00

Using your device
DATA CAPTURE | photos & videos
Use the rear camera to take photos and capture video.
1. Go to Home Screen > select “Camera” > Tap camera icon or screen to take a picture/switch to video icon and tap for
video recording.
2. Using the rear or the front (only for 2nd generation) camera to take photos and capture video.
NOTE
Ensure device memory or extend Micro SD card space is available.
DATA CAPTURE | NFC & biometrics
NOTE
The USB for internal peripherals and external USB-A is the USB line with the high priority level.
USB-C service port is not available when an internal peripheral or USB-A is turned on.
Page 13 | 13
ID Platform FAP50
Quick Start and Regulatory Guide
NFC & IRIS SCANNER
-ID Platform FAP50 with NFC options to read -Please put the TAG/CARD on the NFC area.
Use dedicated application for iris identity enrollment. Use iris scanner on the back of the tablet to authenticate.
NFC
READING
AREA
iris scanner
IR led IR led
FINGERPRINT SENSOR
Please put the finger on the fingerprint sensor taking
care to make contact with the metal part.
QSG 200055 A00