Coquo Voltaire Armoire With Glass Doors Operation and maintenance manual
Safety Notice & Installation
Instructions
VOLITARE COLLECTION
Armoire With Glass Doors
PLEASE READ AND FOLLOW THE SAFETY NOTICE PRIOR TO ASSEMBLY
Safety Notice
Your safety is a priority for coquo. It is important to always follow the assembly
instructions and to comply with the safety warnings included in your module’s
packaging. These documents are also available free of charge at coquo.ca.
WARNING
Modules that are not secured to the wall with safety clips and appropriate anchors
may tip and/or be a falling hazard, which can lead to accidents and/or serious
injuries. To prevent a module from tipping over, it is essential to use safety clips and
anchors to secure the module to the wall. Safety clips are included in the packaging.
If, however, the clips are missing or misplaced, contact a modular specialist, who will
be happy to send you the necessary clips free of charge. The anchors are not
included in the package as the choice of anchor depends on the wall type that the
modules will be affixed to. Do not hesitate to seek advice from your hardware store to
properly choose the anchors that correspond to your wall type.
The cabinets cannot be used for climbing and they cannot support weight that
exceeds the maximum limit specific to each module.
Safety Recommendation:Prevent children from climbing on or clinging to
furniture, islands, drawers, shelves, or doors.
At coquo, your safety is our priority. It is very important to always follow the installation instructions and
to conform to the safety notice that is included in the package. These documents are also available free
of charge online at coquo.ca.
1
Safety Notice
ARMOIRE WITH GLASS DOORS: Volitare Collection
The modules must be secured to the wall using the appropriate anchors for your type of wall.
However, if the clips are missing or misplaced, contact a modular specialist, who will gladly
send you the necessary clips free of charge.
Modules that are not secured to the wall with safety clips and appropriate anchors may tip
and/or be a falling hazard, which can lead to accidents and/or serious injuries.
Wooden Shelves
Each wood shelf is designed to accommodate a maximum weight of 20 pounds (9 kg). Oak
veneer offers a solid and sturdy surface, but some kitchen accessories may leave a residue or
scratch the surface.
Drawer
The armoire drawer is designed to accommodate a maximum weight of 30 pounds (13 kg).
Oak veneer offers a solid and sturdy surface, but some kitchen accessories may leave a
residue or scratch the surface.
Glass Doors
Glass doors are not designed to withstand weight or pressure. Tempered glass offers great
impact resistance and reduces the risk of injury thanks to its ability to break into small, dull
pieces in the event of breakage.
Cabinet Structure
The wooden structure of the modules cannot be used for climbing and it cannot support
weight that exceeds the maximum limit specific to each module.
The top surface of the shelf is designed to accommodate a maximum weight of 10 pounds (4
kg) for accessories such as plants and cookbooks.
Metal Feet
It is essential to use the metal feet provided in your packaging to adjust and level the module.
Adjustable metal feet provide more stability. They cannot be replaced by other types of feet
such as casters. The addition of felt pads under the feet is not recommended and may affect
the stability of the module. In order to ensure the stability of the module, the 4 metal feet
should be inserted and screwed in until the thread is no longer visible. The metal feet may
scratch the floor if the modules are moved or dragged. The weight of the modules, counter
and accessories may cause the metal feet to leave a mark on the floor over time.
At coquo, your safety is our priority. It is very important to always follow the installation instructions and
to conform to the safety notice that is included in the package. These documents are also available free
of charge online at coquo.ca.
2
Installation Instructions
Coquo modules are easy to install! No need to put together a multitude of
components, the modules are shipped already pre-assembled.
Necessary Tools
Before beginning, be sure to have these items on hand:
●A retractable blade knife
●A level
●A pencil
●A tape measure
●Anchors*
●A Phillips screwdriver
* The appropriate anchors should correspond to your type of wall. Anchors are not included as the
choice of anchor depends on your type of wall. Do not hesitate to ask for advice at your hardware store.
Preparation
●Prepare your space to receive the coquo modules and invite some
friends over to help you!
Your package contains:
1. Module (1)
2. Metal feet (4)
3. Safety clip A (anti-tip kit) (1)
4. coquo safety notice and installation instructions leaflet (1)
At coquo, your safety is our priority. It is very important to always follow the installation instructions and
to conform to the safety notice that is included in the package. These documents are also available free
of charge online at coquo.ca.
3
Assembly
Step 1—Feet and adjustments
●Place the module on its side on a protected surface.
●In order to ensure the stability of the module, the 4 metal feet should be
inserted and screwed in until the thread is no longer visible.
●For ease of installation, adjust the metal feet so they are roughly 1″from
the wooden leg.
●Place the module on its feet in the upright position.
●Using a level, adjust the height of the module by adjusting the metal feet
until the module is perfectly level.
Step 2—Safety clip A: anti-tip kit for modules along a wall
●Once the module is in place, trace a line on the wall which corresponds
to the threaded slot on the rear crosspiece.
●Remove the module from its position.
●Remove the contents of the package containing the safety clip A and its
related accessories (anti-tip kit).
●Position the wall plate of the safety clip A (horizontally or vertically) on
the wall opposite the traced line and, using a pencil, make a mark on the
wall where the two screws will be placed.
●Install the bracket to the wall using a screwdriver and the appropriate
anchors for your type of wall.
●Return the module to its position.
●Insert the dowel pin through the wall bracket and the looped wire and
secure with the clinch pin.
●Attach the metal plate on the other end of the wire to the module by
inserting the screw supplied in the package into the threaded slot on
the crosspiece.
At coquo, your safety is our priority. It is very important to always follow the installation instructions and
to conform to the safety notice that is included in the package. These documents are also available free
of charge online at coquo.ca.
4
Table of contents
Other Coquo Indoor Furnishing manuals
Popular Indoor Furnishing manuals by other brands
eliving FURNITURE
eliving FURNITURE COCO CCO-TV180-WHT Assemble instructions
Spacetronik
Spacetronik SPE-B118WW installation guide
Core Products
Core Products Palma PE712 quick start guide
Argos
Argos 642/0110 Assembly instructions
Home affaire
Home affaire Skini 3893 5457 Assembly instructions
Emerson
Emerson ClosetMaid Activity Storage Table installation instructions