Core Products BT222 User manual

Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY
please store the carton at room temperature for 48 hours or more so the contents can acclimatise.
PLEASE RETAI PACKAGI G U TIL YOU HAVE COMPLETED ASSEMBLY.
Information about your furniture.
Our furniture ranges have been carefully crafted from solid wood and natural wood veneers. Each piece of furniture has unique
characteristics such as knots, variances and graniing. These are part of the natural character of the furniture itself.
Caring fror your furniture.
E treme temperature can cause slight movements in the wood itself so please avoid placing your furniture close to radiators or other direct
sources of heat. Humidity should also be avoided. Please avoid e posing your furniture to continued bright sunlight as it can affect the colour.
Any fluid should be removed as quickly as possible. Always lift your furniture when moving, as dragging can cause damage to your furniture or
flooring. E treme changes in temperature & humidity during transit may result in a powder residue forming so silica gel bags have been included
to alleviate this natural occurrence. This residue is harmless and can easily be removed before assembly with a damp cloth and mild detergent.
After care.
Wipe the surfaces with a dry cloth and an occasional use of normal household polish. We also recommend you use household spray
polish occasionally on the drawer grooves and runners as this will aid use. Please do not use detergents or chemicals on your furniture.
PARTS LIST
BEFORE YOU START ASSEMBLY
Please check that you have all the correct parts and fittings as detailed in the Parts List above.
In the unlikely event that you require to order spare parts please refer to your delivery note
for details of how to order on our Parts Website
www.coreproducts.co.uk/parts
For further advise you can telephone [phone]
BATCH NUMBER
Handle
I = x2
70 min
BT222
A = x44
40mm Screw
B = x44
C = x40
G = x2
Mag. Catch
F = x20
Knob
20mm screw
Dowel
25mm screw
D = x50
ail
E = x4
Y = x1
Wall Tie
W = x1
Wall Plug
H = x6
Bolt
Z = x2
Washer
PLEASE RETAI THIS I STRUCTIO LEAFLET FOR FUTURE REFERE CE

4
25mm Screw
1
B = x6
3
B = x3
40mm Screw
A = x20
2
Dowel
40mm Screw
C = x8
A = x4
Dowel

H = x4
Bolt
40mm Screw
I = x2
Handle
7
ail
D = x20
5
B = x8
6

C = x4
B = x10
40mm Screw
C = x32
25mm Screw
9
A = x20
Dowel
B = x6
8
10 11

20mm Screw
20mm Screw
Mag. Catch
H = X2
Bolt
G = x2
Knob
F = x08
F = x12
E = x4
14 15
B = x7
D = x30
40mm screw
ail
12 13
25mm Screw
40mm Screw

Y = x1
W = x1
Z = x2
wall tie
wall plug
washer
15