Core Products CPT510 Manual

CAUTION
THIS BOX CONTAINS GLASS.
PLEASE USE EXTREME CARE
WHEN UNPACKING.
TO AVOID THE RISK OF
DAMAGE DURING ASSEMBLY,
PLEASE ASSEMBLE ON A
SOFT CLEAN COVER,
BLANKET OR TOWEL.

11
15
12
13
16
14
10
10
03
09
08
07
02
04
06
17
04
05
05
10
10
8x8
Zx18
3/16 x 5/8
Mx01 Nx08
Ø3,5
25mm
30mm
Ø3,5
Cx04
Ø8
25mm
Ax28 28mm
Ø4,5
Bx20 D
EF
x12
x02 x02
Ø3,5
14mm
Gx01 H
O
x01
x02
BLACK
Ø3,0
16mm
Kx04
Jx10
50min P3
CPT510
P3 P3
P3
Lx01
Warning!: Keep out of reach from
children, Keep away from eyes, if
product gets into eye rinse thoroughly
and repeatedly with water. Do not
digest, if swallowed seek medical
advise from doctor.
05gGlue
SILVER
GOLD GREY
GREY
GREY
GOLD
Yx01
option 01 option 02
Xx01
RED = PAINT
The RED sachet contains touch up
paint for your furniture. Please
retain for use should you require it
at any point in the future. Application
is best with a small paint brush which
can be cleaned in water after use.
Keep out of reach from children, keep away from eyes, if
product gets into eye rinse thoroughly and repeatedly with
water. Do not digest, if swallowed seek medical advise
from doctor.
Warning!
Px01
DOOR SPACER
01
3/16 x 3/8
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the
contents can acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your Pine furniture.
Our pine furniture ranges have been carefully crafted from solid wood and natural wood veneers. Each piece of pine has unique
characteristics such as knots, variances in shading and graining. These are part of the natural character of the furniture itself.
Caring for your Pine furniture.
Extreme temperature can cause slight movements in the wood itself so please avoid placing your furniture close to radiators or other
direct sources of heat. Humidity should also be avoided.
Please avoid exposing your furniture to continued bright sunlight as it can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
After care.
PLEASE RETAIN THIS INSTRUCTION LEAFLET FOR FUTURE REFERENCE.
PARTS LIST
BEFORE YOU START ASSEMBLY
BATCH NUMBER
2019-0342
Wipe all surfaces with a dry cloth and the occasional use of a normal household furniture polish on wood surfaces and a household glass cleaner on glass
surfaces. For furniture with drawers we also recommend you use household spray polish occasionally on the drawer side grooves and runners as this will
aid use. Please do not use detergents or chemicals on your furniture.
Specialist care.
Glass can be marked with continual use by contact with rough surfaced objects or strong coloured fluids. In the unlikely event that the glass is damaged it
must be replaced without delay with toughened glass made to specification BS EN12150. Please consult a specialist glass retailer for this.
Please check that you have all the correct parts and fittings as detailed in the Parts
List above. In the unlikely event of a part being missing, please email:
[email protected] requesting the part code of the alpha reference,
or email our helpline: [email protected]. Alternately, highlight your
requirement on above diagram.

A
2x
2x
02
01
A
A
B
B
BB
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
J
JJ
J
J
J
J
J
J
J
J
B
B
B
16
0203
Ø8
25mm
Ax28 Jx10
04
03
03
09
02
02
08
06
07
28mm
Ø4,5
Bx06
P3
GOLD
N
N
N
B
B
(+)
!
28mm
Ø4,5
Bx02
P3
Nx03
Ø3,5
25mm
P3
GOLD
SILVER
04
02
04
06
06
07

06
28mm
Ø4,5
Bx06
P3
90º
0208
1Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
10
10
8x8
Zx18
x22
Z
Z
2
3
90º
GOLD
28mm
Ø4,5
Bx02
P3
Nx03
Ø3,5
25mm
P3
SILVER
GOLD
B
N
N
NN
B
03
07
05
90º
28mm
Ø4,5
Bx04
P3
GOLD
10
16
B
B
B
05
05
B
B
B
B
01

09
D
K
G
F
M
K
D
D
ODD
D
O
17
17
option 01
option 02
K
K
G
DF
x06 x01
Ø3,5
14mm
Gx01 Ox02
BLACK
Ø3,0
16mm
Kx02
P3
P3
3/16 x 5/8
Mx01
10
D
D
D
D
D
D
D
D
QQ
17
option 01
option 02
D
D
D
D
(=)
(=)
DOOR SPACER
Q
DOOR SPACER
DOOR SPACER
GREY
GREY
GREY
Dx06
Ø3,5
14mm
P3 GREY
Qx01
DOOR SPACER
!
1ª 2ª 3ª
1ª 2ª 3ª
ADJUSTING HINGE

30mm
Ø3,5
Cx04 Fx01
P3 3/16 x 3/8
P
Lx01
05g
Glue
GOLD
C
F
P
C
C
L
"Join drawer sides to drawer fronts with caution not
to damage dovetail joints. Tap gently up and down the
drawer side until fully inserted into drawer front."
“Use a small
drop of glue."
13
12
11
15
14
x01
12
11
Hx01
BLACK
Ø3,0
16mm
Kx02
H
H
KK
KK
option 01 option 02
H
H
KK
KK
GREY
GREY

14
13
Y
Y
14mm14mm
25mm
14
IMPORTANT NOTICE
Please avoid opening all drawers or
doors simultaneously as this could
causeyour furniture to fall forwards.
Where there is a risk of this occurring,
especially in environments with
children or uneven floors we recommend
that this item of furniture is attached
to your wall using appropriate fixings
(supplied).
Yx01
WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING.
IMPORTANT: IF YOUR WALLS ARE NOT SOLID LIKE BRICK OR STONE, YOU WILL REQUIRE SPECIALIST FITTINGS (NOT SUPPLIED).
- Place fixing strip against the wall and mark position for drilling hole.
- Drill hole in your wall to a depth of 30mm using a 6mm drill bit. If the surface of your wall is soft and crumbly, we would advise you
to use a 5mm drill bit for a tighter fit.
- Insert plug into hole with end flush to the wall surface.
- Attach fixing strip to the wall using the 25mm screw + washer and securely tighten.
- Pre-drill small pilot hole on the back edge of the furniture top using a 2mm drill bit. Attach the other end of fixing strip to the back
edge of the furniture top (4mm under the glass top) using the 14mm screw + washer and securely tighten.
-