Core Products TV 111 - OKG User manual

IMPORTANT
BEFORE YOU START
This is a decorative unit only.
Your will also require a mounting bracket suitable for your
specific television (not included).
Wall fittings are NOT INCLUDED as they will vary
dependent on the location.
Fittings to suit your requirements can be obtained from
most DIY or hardware stores.
Installation must be carried out by a competent installer, we
cannot accept responsibility for any issues relating to assembly o
r
installation, this does not affect your statutory rights.
TV 111 - OKG / TV 111 - OKW

01
02
09
10
03
04
05
06
07 08
UNDERSTANDING THE CODES
STAMPED IN THE PARTS:
00000 00000
Piece number
Lot number
Product code
RIGHT SIDE PANEL
LEFT SIDE PANEL
UPPER CENTRE PANEL
LOWER CENTRE PANEL
CUBE SHELF TOP
CUBE SHELF BASE
CUBE LEFT SIDE
CUBE RIGHT SIDE
TOP SHELF
WALL BRACKET
1
1
1
1
1
1
1
1
1
1
1
2
3
4
5
6
7
8
9
10
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the contents can
acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your furniture.
This furniture has been manufactured from surface coated wood based manufactured boards.
Caring for your furniture.
Extreme temperature can cause slight movements in the board material so please avoid placing your furniture close to
radiators or other sources of heat.
Please avoid exposing your furniture to continued bright sunlight as this can affect the colour,
any fluid spills should be removed as quickly as possible
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
Use mats or coasters to help protect against heat.
Do not stand on your furniture .
Aftercare.
Wipe all surfaces with a dry cloth and the occasional use of a normal household furniture Polish, do not use detergents or
chemicals on your furniture. After assembly remove any visible component identification stickers, these should remove
easily however any remaining adhesive residue can be removed with a label adhesive removal liquid available from most
DIY or hardware stores. For models with drawers we also recommend you use a household spray polish or curtain track
spray on the drawer runner tracks. Please do not use any wax based products, chemicals or detergents on this furniture.
Regularly check all fixings to ensure they are tight.
90min
TV 111 - OKG / TV 111 - OKW
B C
I
D
JL M N
OPQ
K
E F G
30mm
14x 2x 3x 12x 4x 38x
4x 4x 12x 2x 4x 2x
5x 1x 5x
20mm 40mm
25mm
70MM
60MM
12mm
32mm
Ø6 Ø8 Ø3,5 Ø4,0 Ø4,0
Ø5,0
Ø7,5
Ø6 Ø15
Ø15
BEFORE YOU START ASSEMBLY
please check that you have all the correct parts and fittings
as detailed on these instructions.
FOR DAMAGED, MISSING OR REPLACEMENT PARTS
Please visit
2021 specification
Batch number [ ]DJM7170
PLEASE RETAIN THIS INSTRUCTION LEAFLET, ALONG
WITH YOUR DELIVERY NOTE/RECEIPT FOR FUTURE REFERENCE.
www.coreproducts.co.uk/parts
cable cover 40mm
© Core Products 04/21

1º
2º
1º
D K L
G
TO AVOID DAMAGE TO YOUR
FURNITURE DURING
ASSEMBLY PLEASE BUILD ON
A SOFT CLEAN SURFACE
SUCH AS THE INSIDE OF THE
CARDBOARD BOX.
PLACE ALL COMPONENTS ON A
FLAT SURFACE AS INDICATED
D01
04
02
150
30 30
L+G L+G
K+G
K+G
K+G
K+G
K+G
K+G
K+G
K+G
K+G
K+G
K+G
K+G
D+G
D+G
D
K
GG
L
G
G
G
G
01
02
03
04
D D
GGD+G
TV 111 - OKG / TV 111 - OKW
BACK FACE OF PANELS
BACK FACE OF PANELS

E
EE
EE
EE
B
B
B
B
E
3º
5º
4º
F
B
F
FFF
I
I
I
IC
CB
I
B
C
01
02
03
04
FITTING YOUR TV UNIT TO THE WALL
TV 111 - OKG / TV 111 - OKW
M
J
O
09
10
03
02 01
B
B
E
E
P
P
Fit cover caps (o) over fitting (m)
to finish.
05
07 08
06
J
J
J
J
E
E
E
J
M
E
B
B
B
B
B
B
M
M
M
B
B
CUT EDGE FITTED
DOWN WARD

10
Q
Q
Q
Q
BEFORE PROCEEDING TO INSTALL YOUR TV
MOUNTING BRACKET AND TV ENSURE THE
UNIT IS FITTED CORRECTLY TO WALL, IF IN
DOUBT PLEASE USE THE SERVICES OF A
QUALIFIED INSTALLER.DO NOT SIT OR
STAND ON THIS UNIT.
192 192 192
9º
Q
N
224
O
Q
O
Wall
Panel
WARNING: check for hidden pipes and cables before drilling.
IMPORTANT you will require specialist fittings suitable for your
chosen location, not supplied. Place fixing strip against the wall
and mark position for drilling hole. Drill hole in your wall to required
depth.Insert plugs into holes. Attach fixing strip to the wall using
fixings and securely tighten.
Insert fitting into locating hole and tighten, cover with décor cap.
Choose location on wall and mark drill positions using these
measurements for guidance.
Carefully lift panel on to wall bracket and ensure
wiring is accessible and lower locating hole is aligned.
FITTING YOUR TV UNIT TO THE WALL
TV 111 - OKG / TV 111 - OKW
6º 7º
8º
N
ENSURE DRILLINGS ARE ALL LEVEL