Coremorrow N61.R5EK User manual

N61.R5K N61.R5E
N61.R5EK Piezo Motor Driven Rotation Stage
User Manual
Version: V1.0
This document describes the following products:
■N61.R5E
■N61.R5K

DECLARATION
Thank you for choosing Coremorrow's products!
This user manual is applicable to N61.R5E/K Piezo Motor. For your smooth
and correct use of this product, please read this manual carefully before use.
Please follow the instructions in the manual installation and use procedures.
Improper operation may cause injury to the operator or damage to the
product. Therefore, the entire installation and operation process should be
completed by a professional with a certain foundation and understanding of
the product principle, or under the guidance of a professional.
If the product is disassembled or modified without permission, our company
will not be responsible for any consequences arising therefrom.
It is illegal to change the product model and other false sales of our
products. Users are advised to be vigilant. Once you find out or be deceived,
contact us directly, we will crack down on illegal activities and prevent
deception and economic losses. CoreMorrow will certainly investigate legal
responsibility of the illegal subject and related parties.
With the continuous development and innovation of technology, we will
add the latest information to the manual as needed without notice. Please
contact us if you need any information.

1
Contents
1. Introduction ........................................................................................................................................2
1.1 Purpose and content ................................................................................................................2
1.2 Symbol and meaning................................................................................................................2
1.3 Expected reader..........................................................................................................................2
1.4 Manual lost replacement ........................................................................................................2
2. Safety Guide........................................................................................................................................3
3. Product Overview ...........................................................................................................................4
3.1 Product Introduction ................................................................................................................4
3.2 Product Features........................................................................................................................4
3.3 Motion Direction........................................................................................................................4
4. Operating Environment .................................................................................................................5
5. Installation and Operation.............................................................................................................5
5.1 Installation and announcement............................................................................................5
5.2 Load................................................................................................................................................6
5.3 Operating......................................................................................................................................8
6. Transportation and Inspection .....................................................................................................8
6.1 Transportation.............................................................................................................................8
6.2 Unpacking inspection...............................................................................................................9
7. Maintenance and processing........................................................................................................9
7.1 Problem Processing ..................................................................................................................9
7.2 Daily maintenance.....................................................................................................................9
8. Customer Service ...........................................................................................................................10
9. Contact us.........................................................................................................................................10

2
N61.R5EK Piezo Motor Driven Rotation Stage User Manual
1.
2.
1. Introduction
1.1 Purpose and content
The manual is mainly for your smooth and correct use of piezo motor.
The manual contains all necessary information for N61.R5E/K.
The manual describes the precautions during installation and use.
1.2 Symbol and meaning
DANGER: Improper handling may could cause injury to the operator.
Attention: Improper handling can cause damage to the equipment.
No order between items.
1.3 Expected reader
The manual default user has knowledge of piezo motor and controllers, and has a basis for
its installation and use.
1.4 Manual lost replacement
If the manual is accidentally lost, please contact our customer service department, we will
send you the latest version of user manual.
Please operating in order.

3
In order to prevent damage to the product caused by improper operation, please
pay attention to following points when using:
N61.R5E/K piezo motor is used as much as possible in dust-free, oil-free, lubricant-
free environments;
Since the product adopts flexible structure design, it is recommended that the load
not exceed the bearing capacity of the product. Pay attention to the torque when
loading. Do not twist or twist the load surface to avoid damage to the structure;
Do not disassemble the product to avoid product damage;
Avoid stretching and bending the cable interface to prevent damage to the cable;
Please use the dedicated cable provided by us to connect the piezo motor and piezo
controller;
Please do not use cable extension wire, if need longer cable, please contact us.
Temperature changed and pressure will charge the piezo motor. Piezo motor
will remain charged for a period of time disconnected from the controller, so the
operator should pay attention when using it:
Do not disassemble N61.R5E/K piezo motor;
Discharge N61.R5E/K piezo motor before installation, it could be achieved by
connecting to the controller;
Do not pull out the controller during operation;
Before using, please check whether the connecting wire of the product is in good
condition, whether the product and the controller are effectively protected from
grounding, in case of danger, please strictly regulate the operation during operation,
do not touch it (up to 120V voltage) after power on.
2. Safety Guide
N61.R5E/K piezo motor is designed with advanced technology and safety standards, for
safety and proper use of the product, please pay attention to following points when using:

4
N61.R5EK Piezo Motor Driven Rotation Stage User Manual
N61.R5K N61.R5E
360° Two-way
3. Product Overview
3.1 Product Introduction
N61 piezo motor is a piezo motor direct-driven by piezo ceramics. It uses special
mechanical structure design to convert linear microdisplacement by piezo ceramics into
macro-angle rotation motion of mechanical platform.
It has 360 ° rotary motion and has ultra-high rotation resolution. It is small in size and
compact in structure, very suitable for integration. With E53.C piezo controller, and it can
be operated by PC software, which is more convenient.
3.2 Product Features
360° rotation
5μrad angular increment
Speed up to 5° /s
Analog or PC controll
3.3 Motion Direction

5
Load connection(M2.5)
Fixed mounting(M2.5)
Outlet
Moving part
Fixed mounting(M3)
Load connection(M2.5)Moving part
Outlet
Operating temperature: 0~50℃
Environment free of dust, clean, and non-corrosive substances
Relative humidity: <60%
4. Operating Environment
Before installation, first check the safety, such as whether the cable is damaged or broken,
and whether the power supply has grounding protection.
5.1 Installation and announcement
Ensure that the installation surfacee is flat.
Secure the piezo motor with M4 screws and tighten.
Install the load and tighten it properly. The load should not exceed 2kg.
5. Installation and Operation

6
N61.R5EK Piezo Motor Driven Rotation Stage User Manual
5.2 Load
When installing the load, ensure that the load mass is less than the max load of piezo
motor, and install the load as much as possible at the center of the moving surface.
The correct placement of the load is shown below:
Load applied to the center of piezo motor
Try not to let the load center of gravity exceed piezo motor
For protection, we don't recommend the load is too high. If it is used a higher load, please
reduce the position center of the load gravity.
The error placement method is as follows:
It is forbidden to load the load on one side of the piezo motor, which would cause serious
damage to the product, as shown in the following figure:

7
Do not load longer loads and add to the side of the piezo motor
If the screws used in tightening and connecting are too long, the screws will not be
installed or some of screws will leak out, which will scratch the piezo motor and affect the
motion accuracy. If the screws are too short, the connection will not be compact and easy
to loosen. Looseness could damage the internal structure of the piezo motor.
We recommend using the connection method shown below:
Correct connection
Please do not connect as shown below:
Incorrect connection

8
N61.R5EK Piezo Motor Driven Rotation Stage User Manual
Note:
Slowly tighten the load when installing it, and the torque should not be too large
to avoid damage to mechanism.
Avoid stretching and bending cables.
Please connect N61.R5E/K and controller with special cable provided by
CoreMorrow.
Please do not extend the cable without authorization, please contact us if you
need a longer cable.
5.3 Operating
Please confirm the following information before starting the power supply:
The environment meets requirements of N61.R5E/K operating environment.
The fixing screws must be tightened.
The above information is determined to perform controller related operations:
1. Please carefully read piezo controller user manual before operating, then start the
controller;
2. Set the piezo controller to zero;
3. It could work normally within the rated voltage range of piezo motor.
4. Please set the piezo controller to zero after used.
5. If abnormal noise or oscillation occurs during use, immediately turn off the power and
check parameter settings.
6.1 Transportation
Product is packed in carton. The transportation is carried out under the condition of
packaging. This product can be transported by various means of transportation under
normal conditions. During transportation, it should avoid direct rain and snow, avoid
contact with corrosive substances, and avoid strong collision, try to avoid improper
behavior such as squeezing, irregular placement.
6. Transportation and Inspection

9
6.2 Unpacking inspection
Please check below information:
Before opening the package, please carefully check the packaging for damage,
bruising, wetting, moisture, deformation, etc.
Please check the parts on a case-by-case basis based on the supply contract and
the packing list.
Whether there is obvious damage on the surface of the product.
Whether the product identification is clear and complete.
Whether the connector is loose, the connection line is broken or not, etc.
If any of the above occurs, please make a detailed record and take a photo, and please
contact us immediately.
Precautions:
Please handle gently when unpacking to avoid permanent damage to the products
caused by bumps.
Please do not use heavy tools or use rough methods to open them.
Please do not discard all packaging materials for return shipments.
7. Maintenance and processing
7.1 Problem Processing
If the user has problems that could not be solved. Please record the fault situation
and contact with us. The professional technical engineer would help solve the problem.
Problems caused by improper operation are not covered by the warranty;
CoreMorrow is not responsible for any problems caused by dismantling the peizo
motor without permission.
7.2 Daily maintenance
If the product is not used for a long time, please store it in an room environment
with no dust, good ventilation, clean and non-corrosive substances.

10
N61.R5EK Piezo Motor Driven Rotation Stage User Manual
Please do not loosen the screws on the motor structure, avoiding to affect the
accuracy.
Daily cleaning:
Please disconnect the piezo motor to controller, then clean the surface of it.
When cleaning, first wipe a small amount of detergent with a towel and gently
wipe the surface of the piezo motor, then wash it with alcohol. Please do not use ultrasonic
waves for cleaning.
8. Customer Service
If you have questions about the products you are currently using, please let us know the
following information:
Product model number and related number.
Controller model for this product.
Software driver version for this product.
Computer operating system for installing supporting software.
9. Contact us
Harbin Core Tomorrow Science & Technology Co., Ltd.
Tel: [phone]
Email: [e-mail]
Website: www.coremorrow.com
Address: Building I2, No.191 Xuefu Road, Nangang District, Harbin, HLJ, China
CoreMorrow Official and CTO WeChat are below: