Cornelius 629097674 User manual

Carbon cladding KIT installation instruction
© 2017, Cornelius Inc. - 1 - Publication Number: 629097674INS
INSTALLATION INSTRUCTIONS
FIELD INSTALLATION INSTRUCTIONS FOR KIT P/n 629097674(2FL), 629097675(3FL)
& 629097676(4FL)
Carbon cladding KIT installation instruction
SAFETY INSTRUCTIONS
!
WARNING:
Before starting installation, read and understand all safety label and warnings on the machine. Also review and
understand all safety instructions in the owners, installation and service manuals.
Failure to comply could result in serious injury, death or damage to the equipment.
QUALIFIED SERVICE PERSONNEL
!
WARNING:
Only trained and certified electrical, plumbing and refrigeration technicians should service this unit.
All wiring and plumbing must conform to national and local codes. Failure to comply could
result in serious injury, death or equipment damage.
SAFETY PRECAUTIONS
This unit has been specifically designed to provide protection against personal injury. To ensure continued
protection observe the following:
!
WARNING:
Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all
power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
CAUTION:
Always be sure to keep area around the unit clean and free of clutter.
Failure to keep this area clean may result in injury or equipment damage.
Revision Date: October 04, 2017 www.cornelius.com Revision: A

Carbon cladding KIT installation instruction
Publication Number: 629097674INS - 2 - © 2017, Cornelius Inc.
INSTRUCTIONS
KIT Parts List:
Table 1. 629097674 Kit- Viper Carbon Cladding Kit - 2FL
Sl. No. Part No. Description Quantity
1620061546 CUP-REST 2FL VIPER ELITE CARBO 1
2620063393 PANEL SPLASH MAGNET ASSY 2FLV 1
3620063511 SPACER RETAINER 1/2" DIA #10-3 2
4620720840 SCREW MA 10-32 TRPH 24 SSPA 2
5620063180 CLADDING DRIP TRAY BONDING ASSY VIPER
ELITE CARBON 2FL 1
6620067114 CLADDING SPLASH PANEL BONDING ASSY
VIPER CARBON ELITE 2FL 1
7620067116 BRKT CARBON HYBRID TRIM RETAINING 2
870076 NUT HEX 08-32 STCA KEPS 1/8 2
9629097674INS MANL INS CARBON CLADDING KIT 1
10 620047436 LABEL WARNING SPIGOT 1
Table 2: 629097675 Kit- Viper Carbon Cladding Kit - 3FL
Sl. No. Part No. Description Quantity
1 620063511 SPACER RETAINER 1/2” DIA #10-3 1
2 620063555 CUP-REST DRIP TRAY VIPER ELITE 1
3 620063556 PANEL SPLASH MAGNET ASSY VIPER 2
4 620720840 SCREW MA 10-32 TRPH 24 SSPA 2
5 620063506 CLADDING DRIP TRAY BONDING ASSY VIPER
ELITE CARBON 3FL 1
6 620067112 CLADDING SPLASH PANEL BONDING ASSY
VIPER CARBON ELITE 3FL 1
7 620067116 BRKT CARBON HYBRID TRIM RETAINING 2
8 70076 NUT HEX 08-32 STCA KEPS 1/8 2
9 629097674INS MANL INS CARBON CLADDING KIT 1
10 620047436 LABEL WARNING SPIGOT 1
Table 3: 629097676 Kit- Viper Carbon Cladding Kit - 4FL
Sl. No. Part No. Description Quantity
1 620063143 CUP-REST 4FL VIPER ELITE CARBO 1
2 620063392 PANEL SPLASH MAGNET ASSY 4FLV 1
3 620063511 SPACER RETAINER 1/2” DIA #10-3 2
4 620720840 SCREW MA 10-32 TRPH 24 SSPA 2
5 620063112 CLADDING DRIP TRAY BONDING ASSY VIPER
ELITE CARBON 4FL 1
6 620067109 CLADDING SPLASH PANEL BONDING ASSY
VIPER CARBON ELITE 4FL 1
7 620067116 BRKT CARBON HYBRID TRIM RETAINING 2
8 70076 NUT HEX 08-32 STCA KEPS 1/8 2
9 629097674INS MANL INS CARBON CLADDING KIT 1
10 620047436 LABEL WARNING SPIGOT 1

Carbon cladding KIT installation instruction
© 2017, Cornelius Inc. - 3 - Publication Number: 629097674INS
INSTALLATION PROCEDURE
Table 4. Installation Procedure
Step Action Figure
1. Disconnect power from the unit.
2. Remove the drip tray by sliding it forward off the
mounting brackets.
Figure 1.
3. Unscrew the two mounting screws. Remove the
splash panel behind the drip tray.
Figure 2.

Carbon cladding KIT installation instruction
Publication Number: 629097674INS - 4 - © 2017, Cornelius Inc.
4. Fasten the new splash panel magnet assembly to
the unit. (Use spacer and screw provided in the
kit)
Figure 3.
5. Slide the drip tray over the two brackets protrud-
ing from the bottom of the unit until the tray seats
fully on the two detents in the brackets.
Figure 4.
6. Place the new cup rest provided in the kit into the
appropriate mounting grooves in the drip tray.
Figure 5.
7. Place the drip tray cladding on the drip tray.
Figure 6.
Table 4. Installation Procedure

Carbon cladding KIT installation instruction
© 2017, Cornelius Inc. - 5 - Publication Number: 629097674INS
8.
Assemble the splash panel cladding on top
of the splash panel, and center the splash
panel on the unit. The magnetic assembly
will retain the cladding.
Figure 7.
9. Open the merchandiser and insert the stud of the
retaining bracket into the available hole in the
down lighting bracket.
Figure 8.
10. Fasten retaining bracket with hex nut PN 70076.
Repeat process for the other side of the splash
panel.
Figure 9.
Table 4. Installation Procedure

Carbon cladding KIT installation instruction
Publication Number: 629097674INS - 6 - © 2017, Cornelius Inc.
11. Plug in unit to restore power to the unit.
This completes the task.
Figure 10.
Table 4. Installation Procedure