Cortelco Colleague 2200 Setup guide

OWNER’S
INSTRUCTIONMANUAL
CALLER ID TYPE II
DISPOSITION PLUS

THANK YOU
FOR PURCHASING THE
COLLEAGUE CALLER ID TYPE II
DISPOSITION PLUS
Wewant youtoknow allaboutyournewColleagueTelephone,
how to install it, the features it provides, and the services you can
expectfromitsuse.WehaveincludedthisinformationinyourOwner’s
InstructionManual.
PLEASE READ BEFORE INSTALLING
AND USING YOUR NEW TELEPHONE EQUIPMENT.

TABLEOFCONTENTS
IMPORTANT SAFETY INSTRUCTIONS............................................................. 2
TELEPHONEUSAGE............................................................................................ 4
SETUP/INSTALLATION ................................................................................ 4
WALLMOUNTINSTRUCTIONS................................................................... 5
UNIT SETUP ........................................................................................................ 5
FACTORYPRESETS ................................................................................... 5
TELEPHONE PART IDENTIFICATION ................................................................ 7
TELEPHONEFEATURES..................................................................................... 8
PULSEANDTONEDIALING........................................................................ 8
RECEIVINGAPHONECALL ....................................................................... 8
PLACINGA PHONECALL........................................................................... 8
SPEAKERPHONEBUTTON.......................................................................... 8
DURATIONCOUNTER.................................................................................. 9
MUTEBUTTON ............................................................................................ 9
AUTOMATICMEMORY ................................................................................ 9
TO STOREA PHONENUMBERIN MEMORY .......................................... 9
TODIAL A PHONENUMBER INMEMORY ............................................ 10
VOLUMEBUTTON ..................................................................................... 10
REDIALBUTTON ....................................................................................... 10
PAUSEBUTTON ........................................................................................ 10
HOLDBUTTON ........................................................................................... 11
FLASHBUTTON ......................................................................................... 11
DATAPORT ................................................................................................ 11
CALLWAITING DISPLAY .......................................................................... 11
CALLER ID FEATURES ..................................................................................... 12
MESSAGELIGHT....................................................................................... 12
MESSAGEDWAITING ............................................................................... 12
RECEIVINGCALLS.................................................................................... 13
REVIEWINGCALLS................................................................................... 14

DELETINGCALLS ..................................................................................... 14
CALLBACK... ............................................................................................ 15
DIALOPTIONSBUTTON ........................................................................... 15
MESSAGEERROR ..................................................................................... 17
NO DATASENT ......................................................................................... 17
PRIVATE CALLS ........................................................................................ 17
UNKNOWNCALLS .................................................................................... 18
CALLWAITING DELUXE........................................................................... 18
TELEPHONE SERVICE PROBLEMS................................................................. 19
MAINTENANCE INFORMATION ....................................................................... 20
TELEPHONEREPAIR ......................................................................................... 21
FCC INFORMATION .......................................................................................... 22
INDEX ............................................................................................................. 23

IMPORTANTSAFETYINSTRUCTIONS
Always follow basic safety precautions when using your telephone equip-
ment to reduce the risk of fire, electrical shock, and injury.
1. ReadandunderstandallinstructionsintheOwner’sInstructionManual.
2. Read all warnings and follow all instructions marked on the product.
3. Unplugthisproductfromthewalloutletbeforecleaning.Useadamp
cloth for cleaning. Do not use liquid or aerosol cleaners.
4. Do not use the telephone near water. For example, do not use near a
bathtub, wash bowl, kitchen sink, laundry tub, swimming pool, or in a wet
basement.
5. Donotplacethisproductonanunstablecartorstand.Theproductmay
fall causing serious damage to the product.
6. Useonlythetypepowersourceindicatedonthelabel.Ifyouarenotsure
ofthetypepower supplytoyourhome,consultyourdealer orlocalpower
company.
7. Donotplaceanyobjectsonthe telephone linecord.Donotlocatethe
telephone where the line cord will be walked on.
8. Do not block or cover ventilation slots and openings in the bottom of
the telephone. The openings should never be blocked by placing the
telephone on a bed, sofa, rug, or other similar surfaces. The telephone
should never be placed near or over a radiator or heat register. The
telephone should never be placed in a built-in installation unless proper
ventilation is provided.
9. Neverspillliquidonthetelephoneorpushobjectsofanykindthrough
ventilation slots. Liquid or objects may touch dangerous voltage points
or short out parts that could result in a risk of fire or electrical shock.
2

10. Do not disassemble this product. Opening or removing covers may
expose you to dangerous voltages or other risks. Incorrect reassembly
can cause electrical shock when the product is subsequently used.
11. Do not overload outlets and extension cords. Some telephones
require AC power from an outlet. Overloading the outlets can result in
the risk of fire or electric shock.
12. Avoidusingatelephoneduringalocalthunderstorm.Theremaybea
remote risk of electrical shock from lightning.
13. Donot use atelephone toreport agas leak inthe vicinityof the leak.
14. Unplug the telephone from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
• When the line cord is frayed or plugs damaged.
• If liquid has been spilled into the telephone.
• If the telephone has been exposed to rainor water.
• If thetelephonedoesnotoperateproperlybyfollowingtheoperating
instructions. (Adjust only those controls covered by the operating
instructions. Improper adjustment of other controls may result in
damage and will often require extensive work by a qualified
technician to restore the product to normal operation.)
• If the telephone has been dropped or the housing damaged.
• If the telephone exhibits distinct change in performance.
SAVETHESEINSTRUCTIONS
15-101-613
3

TELEPHONEUSAGE
SETUP/INSTALLATION
1. Connect the adapter. Plug the large part of the adapter into the wall outlet and the
adapter tip to the jack at the rear side of unit. (Use only 9V DC. 200mA, center
positiveClass2adapter.)
2. Connectthetelephonelinecord.
a. To connectwithout anansweringmachine.
•Use thenewlinecordtoconnectthePHONEjackofyournewcallerIDphone
tothemodularwall jack.
b. To connectwith anexisting answeringmachine.
•UsetheexistinglinecordsuppliedtoconnecttheLINEjackofyouranswering
machinetothewallmodularlinejack.
•Use the new line cord supplied to connect the telephone’s jack of your new
CallerIDphonetothePHONEjackofyouransweringmachine.
•Setyour answering machineto answerthe phoneafter 2 ormore rings.
3. Follow theprocedure “UnitSetup” to setup yourunit.
4. Place theunit on aflat tableor mount it on awall. Ifyou desire toplace iton awall,
use the wall mount bracket and short line cord supplied to accomplish the wall
mounting.
4
Adapter
Modular
Wall Jack
Answering
Device
Adapter
Modular
Wall Jack

WALLMOUNTINSTRUCTIONS
1. Installwallmountbracketinwallmountpositionandroutecordsasshownindiagram
below.
2. Connect the adapter and the line cord. See Steps 2 & 3 on preceding page for
specificinstructions.
3. Push out the handset hook and reattach in opposite direction for the wall mount
position,plugthecoiledcordintothehandset,andthenplugtheotherendofthecord
intothe case.
4. Placethehandseton thebase.
UNIT SETUP
FACTORYPRESETS
The following table shows you the factory settings for your unit:
Display Setting
Language English
LCDContrast 3
AreaCode nosetting
LDSCode 1
AccessCode _
Note: Afteryouhave setuptheunit completelyforthefirst time,usetheMENU button
to review or reprogram the Language, Contrast, Area Code, LDS Code or Access
Code.
5
Wall Jack Mounting Views
Wall Mounting Bracket Positions
Wall
Desk
12
34
Desk top position Wall mount position
Wall Jack
AC POWER
ADAPTER
Handset Hook
WALL
WALL

After the adapter is connected, the display will show as indicated below for setting.
1. [SETLANGUAGE]appears onthe display. Pressthe REVIEW UP ( ) button to
selectthelanguage.E-English,F- French,S-Spanish,andthenpresstheDIAL
buttontoconfirmthe selection.
2. When [LCD CONTRAST]appears, press REVIEW UP ( ) button to set the
contrast darker, and then you can press REVIEW DOWN ( ) button to set the
contrastback tothe preset.
3. When [SET AREACODE] appears,use REVIEW UP ( )button andREVIEW
DOWN ( )buttontosetyour localareacode.
REVIEW UP ( )button -to changethe digitfrom -. 0,1,2, -9
REVIEWDOWN( )button-tomovetothenextdigit.
Whenyou arefinishedsetting thelocal area code,press Dial.
4. When[SETLDSCODE]appears,pressREVIEWUP( )buttontochangethelong
distancecodefrom-, 0,1, 2, -9.Whenyouare finished,PressDIAL.Thedisplay
willindicateas shown(Stand-ByScreen) andbereadyto receiveincomingcalls.
You have to setthe LDS codeas 1 whenyou are inthe USAor Canada.
Stand-By Screen
5. When[SETACCESSCODE]appears,useREVIEW UP ( )buttonandREVIEW
DOWN( )buttontosetyouraccesscode. TheCodecanrangefrom_to9. The
AccessCodeisusedtoobtainanoutsidelinewhenusingaPBXandsomeCentrex
applications. Thisfeaturecanbe usedwithCallerIDand MemoryLocations.
6. ThetimeanddateareautomaticallysetwhenacallerID(CID)numberisreceived.
The unit will keep the current time accurately, and is updated each time a CID
numberisreceived.
6
E
SET LANGUAGE
2
LCD CONTRAST
- - -
SET AREA CODE
1
SET LDS CODE

1 Pause Button 14 3-Way Call
2 MemoryDialButton 15 Tone/Pulse Switch
3 Mute Button 16 PleaseWait
4 Volume Button 17 Ringer Off/Low/Hi Switch
5 Store Button 18 To Voice Mail
6 Delete Button 19 CallBack
7 Review Up/Down Button 20 Flash Button
8 Customized Logo 21 Speaker Low/Mid/Hi Switch
9 Menu Button 22 10 Memory Buttons
10 New Call LED 23 Redial Button
11 New Message LED 24 Speakerphone Button
12 Dial Button 25 HoldButton
13 Options Button 26 Memory Index
7
TELEPHONEPARTIDENTIFICATION
1
2
3
4
567
89
1011 12 13
14 15
16 17
18
19
20
21
22
23
24
25
26

TELEPHONEFEATURES
PULSEANDTONEDIALING
1. Ifyourtelephonelineacceptsatouch-tonedialing,setthe PULSE/TONE
switchto theTone position.
2. If your telephone line requires a rotary (pulse) dialing, set the PULSE/TONE
switchto the Pulseposition.
3. Ifyouare unsure whichsystemyouhave,set theswitchtotheTONE position.Lift
the handset. When you get a dial tone, dial a telephone number. If the dial tone
continues,movetheswitchtoPULSE, and thendialthetelephonenumberagain.
Note:InorderfortheCaller IDcallbacktowork(see UsingtheCallerIDFunction),you
mustset thePULSE/TONE switchto theToneposition.
RECEIVINGAPHONECALL
1. Besurethe RINGER switch issetto theHI orLOW position.
2. When thephone rings and the caller’sinformation showson thedisplay window
(refer to Using the Caller ID Function), lift the handset or press the SPEAKER-
PHONEbuttonandbeginyourconversation.
3. SettheRinger switchtothe OFF positionwhen youdonotwant tobeinterrupted
bythe phoneringing. Rememberto settheringer switchback toHior Lowwhen
youwant to receive calls again.
PLACINGAPHONECALL
1. Liftthehandsetor press theSPEAKERPHONEbuttonandwaitforadialtone.
2. Dialthetelephonenumberyou wishtocall.Thenumberwillappearonthe display
window.
SPEAKERPHONEBUTTON(ACAdaptormustbeusedtoensureproperfunction)
1. ReceivingIncomingCalls
a. When the phone rings and the callers information shows on the display
window (refer to Using the Caller ID Function), press and release the
Speakerphonebutton and talknormally intothe built-inmicrophone from a
distanceof 5-6 inches.
8

b. You can adjust the volume of the caller s voice by sliding the VOLUME
CONTROLontherightsideofthe phone.
c. After theconversation has finished,press theSPEAKERPHONE buttonto
hangup.
2. ToMakeACall
a. PressandreleasetheSPEAKERPHONEbutton.
b. When you hear a dial tone, dial the number or press the auto memory
button just as you would on any other push-button telephone. The number
will appear on the display window.
c. Whenyourpartyanswers,adjustthesoundlevelofhisorhervoicebysliding
theVOLUME CONTROL locatedon therightsideofthephone.
d. Aftertheconversationhasfinished,press SPEAKERPHONEtohangup.
DURATIONCOUNTER
A built-in counter will start counting from your reference 6 seconds after you lift the
handsetor6 secondsafteryoudial a telephonenumber.
MUTEBUTTON
PressMUTEtospeakwithoutthepersononthephonehearingyourconversation. The
MUTE Indicatorwilllightupand remainlighteduntilyouresumeyourconversation. To
resumeyour conversation,pressMUTE. TheMUTE indicator will goout and yourcall
cancontinue.
AUTOMATIC MEMORY
ToStoreANumberInMemory:
1. Press the STORE button, [MEMORY STORING]appears on the display
window.
2. Dialthetelephonenumber(15digitsmaximum)tostorein memory.
Note: The memory locations can be chained together to store numbers of
longerlength.
3. PressSTOREagain.
4. Pressthedesiredmemorylocation.
•Tostoreinanautomemorybutton(locatedonright-handsideofbase)-Press
1, 2, 3, or 10).
9

•Tostore ina keypadmemory location- Pressone ofthe keypadbuttons (l,
2, 3, or 0).
5. Usepullout memoryindexto write innameand thememorybuttonwhere itis
stored.
ToDial A PhoneNumberInMemory
1. Lift the handset and waitfor adial tone.
2. Pressanymemorylocation.
•To dial an auto memory button (located on right-band side of base) - Press
thedesiredauto memorybutton(1, 2,3....or10).
•Todialakeypadmemorylocation-presstheMEMDIAL buttonfirst,andthen
thedesired keypadbutton (1, 2,3.... or0).
3. Thenumberwillbedisplayedanddialedautomatically.
VOLUMEBUTTON
Abuilt-inamplifierfeature allowsyoutoincreasethe listeningvolumeinthe receiver of
thehandsetwhen speakingwithyourparty.Whenneeded, presstheVOLUME button
toachieve three differentlevels. The volumewillgo backtodefault afteryouhang up
thehandset.
REDIALBUTTON
1. If thenumber youdialedis busy,or youwantto callthe last numberdialed again,
lift the handset, or press and release the hookswitch for a new dial tone.
2. PressREDIAL.Thenumberwillappearon thedisplaywindow.
3. Thelastnumbercalled(31digitsmaximum)willautomaticallyberedialed.
PAUSEBUTTON
ThePAUSEbuttonallowsyoutoinserta3.6-secondpauseinthedialingsequence.This
is particularly useful if you are connected to a PABX system where you must dial an
accesscode (usually thenumber 9) toobtain anoutsideline.
1. Press the PAUSE button once and release at any point in the dialing sequence
where a pause is desired.
2. ThePAUSE buttoncanbe pressedmorethanonceto createalongerpause.
10

HOLDBUTTON
1. Toplaceacallonhold,presstheHOLDbuttonandhangupthehandset.TheHOLD
Indicatorwilllightup and remainlighteduntilyouresume yourconversation.
2. Toresumeyourconversation,liftthehandsetorthatofanyextensionphoneonthe
samelineorpressandreleaseSPEAKERPHONE.TheHOLD indicatorwillgoout
andyour call cancontinue.
FLASHBUTTON
Thistelephone providesa line breaksignal foraccessing PABXservice orfor conve-
nientuse ofCall Waitingfrom yourlocal telephonecompany.If youhave CallWaiting
service,you canalternatethe CallWaitingfunction perthefollowing instructions.
1. Whilehavinga conversation,another partycallsand youheara tone.
2. PresstheFLASHbuttononceandrelease.Thefirstconversationisplacedonhold
andthe second callcan be answered.
3. PressFLASHbuttonagainandrelease.Thefirstcallercanbespokentoagainand
thesecond call isplaced onhold.
Flashcanalso beusedwhen storingnumbersinmemory locationstotransfer acallto
a new extension.
Note: If you also have subscribed to Call Waiting Caller ID service, please see Call
Waiting Display below
DATAPORT
Thisisaconnectionwhichisinparallelwith the telephoneline. Itallowstheconnection
ofa device suchas amodem,caller ID,oran answeringmachine.
CALLWAITINGDISPLAY
In the past, if you had call-waiting service, a tone alerted you there was a new call
comingwhile youwere onan existingcall.
NowourCallWaitingCallerIDnotonlytellsyouthereisanothercallwaiting,butletsyou
knowwho the calleris before youanswer it.Thecall waitinginformationwill beshown
ontheunit’sdisplay.
The CALLWAITING (CW)symbol will flash for 16seconds alongwith the telephone
numberandname oftheperson whoison callwaiting.Press theFLASHbutton toput
theexisting call onhold andanswer thenew call.
11

Nomatterwhetheryouanswerthecallornot,theCallWaitingCallerIDwillstorethecall
informationfor futurereference.
Note: Make sure you have subscribed to both Call Waiting Caller ID and Caller ID
servicefromyour localtelephonecompany.If youonlyhave CallerIDservice, theunit
works for Caller ID only.
CALLERIDFEATURES
MESSAGELIGHT
Anindicator markedNEW CALL will lightupto letyou knowwhenthere arenew calls
received.
If you have a voice mailbox service with your telephone company, another indicator
markedMESSAGE willflashtoalert you todialyourtelephonecompanytocheckyour
newmessages.
TheMESSAGEindicatoralsomonitorstheunit’ssituation.Whenthephoneisinuse,the
MESSAGEindicatorwillbeoncontinuously.Iftheindicatoris flashingquickly,itmeans
thephoneisringing. Ifitisnotringing andthelightisflashing, theunithasexperienced
apower outage.
MESSAGEWAITING
Thisunit’sMESSAGEWAITINGDETECTIONisforbothFSKandStutterToneSystems.
IFYOURSERVICEISFSK:
1. If you have a voice mailbox service from the phone company, the MESSAGE
indicator will flash and [MESSAGE WAITING] will appear on the display for 20
secondswhena messagewaitingsignal (on)fromthe CentralOfficeis received.
2. The MESSAGE indicatorwill gooffand[MSG WAITING OFF] will appearfor20
secondsif the messagewaiting offsignal is sentfrom theCentral office.
12
PM 8:59 9/24 NEW 36
555-1234
JACK SMITH
CALL#
CW
CALL WAITING SYMBOL

IFYOUAREIN AN AREAWHEREANFSKSIGNALISNOTAVAILABLE:
1. Thisunitwill checkyourlinefor astutterdialtone everytimeyou hang uporeach
timea callgoes unanswered.The MESSAGE indicator willflash whenthere isa
messagewaiting.
2. You mayexperiencesome delay inseeingthe MESSAGEindicatorlightup even
though there are messages in your rnail box. This delay is due to regulatory
mattersanddoes notindicateaproblemwith theunit.
This unit may not be activated or deactivated under certain conditions. For example,
when you retrieve your message from an outside phone (not your own telephone
number),the MESSAGE indicatormaynot becanceled when youreturn home. Ifyou
experiencethissituation,pickupthereceiverandhangup.TheMESSAGE indicatorwill
cancel.
RECEIVINGCALLS
1. Whenthetelephone isnotin useanda new callisreceived, thedisplaywill show
theNEWsymbol,thephonenumber,thecallersname,andtimeanddateofthecall
for20 seconds. TheRPT(repeat) symbolwillappear ifthecallhas comeinmore
thanonce.
2. After 20 seconds with no activity, the display will default to the Stand-By screen
andremain onuntilanother callis receivedora buttonis pressed.Thiswill show
youthe totalnumber of callsstored andhow manynew callsthat have notbeen
reviewed.
13
AM 8:59 8/24 NEW 06
765-555-1234
JOHNSMITH
RPT
CALL#
REPEAT SYMBOL
NEW SYMBOL
AM 8:59 8/24 NEW 05
TOTAL CALLS 06
CALL#
AM 8:59 8/24 NEW 06
TOTAL CALL 08
NEW SYMBOL
TOTAL NEW CALLS

REVIEWINGCALLS
1. WhentheNEWsymbolisflashingontheStand-Byscreen,youhavenewincoming
calls.NexttotheNEWsymbolisthetotalnumberofnewcalls.PresstheREVIEW
UP ( ) orREVIEW DOWN ( ) buttontoreview theincomingstoredcalls.
2. The NEWsymbolattached toeachcall willbe removedafteryou reviewthe call.
3. If the NEW symbol is still flashing when the display goes back to the Stand-By
screen, there are new calls that you have not yet reviewed.
4. The reviewed number can be stored into any of the auto memory buttons or
keypad memory locations by pressing the STORE button first, then one of the
memorybuttons
5. Whenyouhavereachedtheendofthecallrecords,thedisplay will indicate[-END
OFLIST- ], confirmingthere areno morecalls stored.
Note: If the telephone number received is more than 10 digits, the unit will only store
the first 10 digits into memory.
DELETINGCALLS
1. Todeleteanindividualcall: Whenreviewingcalls,youcandeleteanindividualcall
bypressingtheDELETEbuttononce.Thedisplaywillbeerasedlinebylineandthe
restof the recordswill berenumbered.
2. To deleteall calls:Whenreviewing calls,you candelete allcallsby pressingand
holdingDELETEformorethan3seconds.Then[DELETEALL]’willappear.Press
DELETE to confirm you really want to erase all records. [-NO CALLS-]appears
onthe displayto showthere areno callsstored inmemory.
14
00
- END OF LIST -
CALL#
AM 8:59 8/24 NEW 06
765-555-1234
JOHNSMITH
RPT
CALL#
AM 8:59 8/24 06
DELETE ALL?
CALL#

CALLBACK
When reviewing received calls, there are two ways to dial the telephone numbers
shownon the displayby pressingDIAL.
1. With the handset in its cradle (on-hook), press DIAL. [PICKUP PHONE...]” will
appearin theLCD displayto ask you to pickup thehandset. Thenumber willbe
dialedafter you pickup thehandset.
2. Ifyoupickupthehandset,reviewthecalls,andpressDIAL,thedisplayednumber
willbedialedimmediately.
Note: The HANDSET symbol will light up in the upper left hand corner of the LCD
displaywhen thehandset is picked up.
If[SETAREACODE]appearspriorto[PICKUPPHONE...]”ordialing,itmeansyouhave
not programmedthe local area code.Pleasehang upthe telephoneand program the
areacode.
1. Ifalocalcall(atelephonenumberwiththesameareacodeasyouset)isreviewed
andits7-digitnumber displayed, pressDIALtodialthenumberdisplayed.
2. Ifalongdistancecall(atelephonenumberwitha differentareacodethanyouset)
isreviewedandits10-digitnumber(3-digit areacode+7-digittelephonenumber)
isdisplayed,press DIALtodialthenumberdisplayed.
OPTIONSBUTTON
The OPTIONS button allows you to change the format of the displayed number The
availableformat follows:
7-digit 7-digittelephonenumber.
10-digit 3-digitareacode+7-digittelephonenumber.
11-digit longdistancecode1+3-digitareacode+7digit telephonenumber.
Ifalocalcall, andits7-digitnumber isdisplayed:
•PressingOPTIONSoncewillchangeittoa10-digitformat(yourareacode+7-digit
number).
•PressingOPTIONS twice willchangeittoan 11-digitnumber(1 +yourareacode
+ 7-digittelephonenumber).
15
PM 8:59 9/24 NEW 36
914-655-1234
PICKUP PHONE...
CALL#
CW
HANDSET SYMBOL

•PressingOPTIONSthreetimeswillgobacktotheoriginal7-digittelephonenumber.
Forexample:Yourareacodeis205andyouarereviewingtelephonenumber785-2883.
Whenthe desired formatof thetelephone numberis reached, press DIALtodial the
displayednumber.
Note:Since the LCDcan onlydisplay 10 digittelephone numbers,when you change
theformat to11-digits,only thefirst 10digitscan beseen, butit willdial 11-digitsafter
youpress DIAL.
Ifalong distance call,andits10-digit numberisdisplayed,
1. PressingOPTIONS oncewillchangeittoan11-digitnumber(1+3-digitareacode
+7-digit telephonenumber).
2. PressingOPTIONS twice willremovethe3-digitareacodeand changetodisplay
onlythe7-digittelephonenumber.
3. PressingOPTIONS threetimeswillgobacktotheoriginal 10-digit number
4. Forexample:yourownareacodeis205,andyouarereviewingtelephonenumber
914-656-5756.
When the desired format of the telephone number is reached, press DIAL to dial the
displayednumber.
16
10:36 8/24 NEW 06
785 - 2883
DANIEL WHITE
CALL#
10:36 8/24 NEW 06
205 - 785 - 2883
DANIEL WHITE
CALL#
10:36 8/24 NEW 06
120 - 578 - 5288
DANIEL WHITE
CALL#
Original
785-2883 Press Option button once
[phone] Press Option button twice
1 + [phone]
PM PM PM
8:29 8/24 NEW 06
914 - 656 - 5756
SMITH JOHN
CALL#
Original
[phone] Press Option button once
1+[phone] Press Option button twice
656-5756
8:29 8/24 NEW 06
191 - 465 - 6575
SMITH JOHN
CALL#
8:29 8/24 NEW 06
656 - 5756
SMITH JOHN
CALL#
PM PM PM

MESSAGEERROR
•The display indicates [-ERROR-]” if your unit receives a call that has an
errorinthe transmissionorreception.
NODATASENT
1. [-NODATASENT-]willbedisplayedifthereisnocallerID(CID) number sentfrom
thetelephonecompanywhileringing.
PRIVATECALLS
•If the caller has exercised the option to block his number from being sent,
[PRIVATENUMBER]andhisnamewillalternatelydisplayonthescreenwhenthis
informationisreceived.
•Ifthecallerhasexercisedtheoption to blockhisnamefrombeingsent,[PRIVATE
NAME]andhis telephonenumberwillbe displayedonthescreen.
•Ifthecallerhasexercisedtheoptiontoblockhisnameandnumberfrombeingsent,
then [PRIVATECALLER] willbedisplayedon thescreen.
17
8:59 8/24 08
- ERROR -
PM
CALL#
-NO DATA -
PM
4:34 12/31
9:27 9/28 13
---------------------
PRIVATE NUMBER...
8:59 8/24 06
785-2541
PRIVATE NAME
CALL#
7:59 9/24 05
PRIVATE CALLER
CALL#
CALL#
PM
JOHN SMITH
PM NEW
PM
NEW