Costway SP36550 User manual

www.costway.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Visit us: www.costway.com
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
POWER RACK
SP36550

2
www.costway.com
3
www.costway.com
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You StartBefore You Start
Please read all instructions carefully.
Retain instructions for future reference.
Seperate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
PARTS LIST
Pre-assembled Pre-assembled

4
www.costway.com
5
www.costway.com
STEP 1
Attach the Bottom Connection Tube (3) to the Right Bottom Tube(1) and
the Left Bottom Tube (2), using 2PCs x (11) Plates (120mmL), 4PCs x
(15) Hex Bolts (M10 x 70mm), 8PCs x (17) M10 Washers, 4PCs x (12)
M10 Nylon Nuts.
STEP 2
Attach 4PCs x (4)Uprights to the Right Bottom Tube (1) and the Left
Bottom Tube (2), using 4PCs x (10) Plates (150mmL), 8PCs x (15) Hex
Bolts (M10 x 70mm),16PCs x (17) M10 Washers, 8PCs x (12) M10 Nylon
Nuts.

6
www.costway.com
7
www.costway.com
STEP 3.
1. Attach two Top Tubes (5) to the Upper Rear Connection Tube (6), using
2PCs x (16) Hex Bolts (M10 x 65mm), 4PCs x (17) M10 Washers,2PCs x
(12) M10 Nylon Nuts.
2.Attach the Top Tubes (5) and the Upper Rear Connection Tube (6) to
4PCs x (4) Uprights using 4PCs x (10) Plates (150mmL), 8PCs x (15)
Hex Bolts (M10 x 70mm), 16PCs x (17) M10 Washers, 8PCs x (12) M10
Nylon Nuts.
STEP 4:
1.Attach the Upper Front Connection Tube (7) to the Top Tube (5), using
2PCs x (11) Plates (120mmL), 4PCs x (15) Hex Bolts (M10 x 70mm),
8PCs x (17) M10 Washers, 4PCs x (12) M10 Nylon Nuts.
2. Insert 2PCs x (8) Weight Rests (Long) and 2PCs x (9) Weight Rests
(Short) into the Upright (4).

EXPLODED DRAWING
9
Welcome to visit our website and purchase our quality products!
Reward Points
Exclusive Customer Service
Personalized Recommendaons
Permanent Shopping Cart
Order History
We would like to extend our hearelt thanks to
all of our customers for taking me to assemble
this product and giving us valuable feedbacks.
www.costway.com
Your suggestions and comments for COSTWAY are really important to us!
We sincerely solicit you to go back to our shop and leave a good rating in just a
simple click. It would be quite encouraging if you could kindly do so like below:
February 24, 2019
Great products so far. Fast delivery, easy setup, and working without any issues.
Great products so far
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
www.costway.com
8
www.costway.com