Costway OP70074 User manual

www.costway.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Visit us: www.costway.com
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
Snow Racer
OP70074

2
www.costway.com
3
www.costway.com
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You StartBefore You Start
Please read all instructions carefully.
Retain instructions for future reference.
Seperate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
Assemble Diagram
1. Please install the ski board on the left and right bottom
of the frame. (step 1)
2. Please tight the screw connected with ski board to
frame. (step 2)
3. Use 4 screws to fix the plastic seating panel to the
frame. (step 3)
4. Insert the steering shaft into steering hole. (step 4)
5. Fix the steering cover tothe steering shaft. (step 4)
6. Connect front ski board with the steering shaft
through steering cover. (step 4)
7. Tighten the screw on the front ski board, steering cover
and also those on the Steering shaft. (step 4)
8. Connect the wheel and the steering shaft . (step 5)
9. Tighten the screw that connected the wheel and steering
shaft. (step 5)

4
www.costway.com
5
www.costway.com
User manual of snow racer
Thanks for choosing our snow racer. For the maximum utility of the
Product and the great pleasure acquired from playing with the product,
Please take some time to read through this manual before using it. You are
supposed to follow the instruction without missing points.
Installation
Please prepare following tools for the installation of the snow racer:
hexagon wrench, and cross screw driver. please install the snow racer
according to the consequence of the illustration.
Tips for the driving
Please take seat on the plastic seating panel; grasp the steering wheel; let
your feet relaxed on the ski board; keep your sight looking straight forward;
turn the steering wheel to your desire direction. When decelerate needed, please
trample on the brake steps slightly and surely grasp the steering wheel.
The simple and effective brake system will systemic give deceleration
according to the strength you trample on the brake.
Max Load
The maximum load of the racer is 75 kg!!
Applicability
Only can be used on the surface covered with snow of the thickness more
than 30mm!!
Warning and Safety Instruction
This product is special design for the age elder than 4 years. It is prohibit
that the user is below 48-month!!Children must be under the guidance of the
adult in using it. Please ride it with helmet and gloves.
Please do not ride in bad weather and load exceeds the limitation as specified.
Riding on the slope with the grade bigger than 35 degree is prohibit..
Installation
Step1.plsase install the ski board on the left and right bottom of the frame.(1)
Left ski board
Frame
①
⑥
④
③
Front ski board
Steering wheel
The screw holes fixing
the front ski board
4 screw holes for fixing
Plastic seat panel
The screw hole
For fixing board
Steering shaft hole
Brake
⑤
Steering shaft
The screw hole for
fixing steering wheel
The hole for fixing
the string
⑧
Step 2:please tight the screw connected with ski board to frame.(2)
Step3:Use 4screws to fix the plastic seating panel to the frame.(3)
Step 4:Fix the front ski board on the steering shaft and make sure the screw
connected with.(4.5.6.7)
Step 5:Firstly insert the steering shaft into the steering hole on the frame.Then put
the shaft cover on the steering shaft. Finally insert the steering wheel into shaft.(8.9)
Step 6:Try to trample the brake
Step 8: Fix the string on the front ski board
②
⑦
The hole for fixing the spring
Step7:Hook the spring on this position connected with frame

6
Welcome to visit our website and purchase our quality products!
Reward Points
Exclusive Customer Service
Personalized Recommendaons
Permanent Shopping Cart
Order History
We would like to extend our hearelt thanks to
all of our customers for taking me to assemble
this product and giving us valuable feedbacks.
www.costway.com
Your suggestions and comments for COSTWAY are really important to us!
We sincerely solicit you to go back to our shop and leave a good rating in just a
simple click. It would be quite encouraging if you could kindly do so like below:
February 24, 2019
Great products so far. Fast delivery, easy setup, and working without any issues.
Great products so far
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
www.costway.com