Costway TL35460 User manual

USER'S MANUAL
Kayak Roof Rack
TL35460
UNITED STATES
CANADA UNITED KINGDOM
GERMANY
FRANCE ITALY
SPAIN
JAPAN
RUSSIA
AUSTRALIA
With your inspiring rating, COSTWAY will be more consistent to offer you EASY
SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
Mit Ihrer inspirierenden Bewertung wird COSTWAY konsistenter sein, um Ihnen
EIN SCHÖNES EINKAUFSERLEBNIS, GUTE PRODUKTE und EFFIZIENTEN
SERVICE zu bieten!
Avec votre évaluation inspirante, COSTWAY continuera à fournir une
EXPÉRIENCE D’ACHAT PRATIQUE, des PRODUITS DE QUALITÉ et un
SERVICE EFFICACE !
Con su calificación inspiradora, COSTWAY será más consistente para ofrecerle
EXPERIENCIA DE COMPRA FÁCIL, BUENOS PRODUCTOS y SERVICIO
EFICIENTE.
Con la tua valutazione incoraggiante, COSTWAY sarà più coerente per offrirti
ESPERIENZA DI ACQUISTO FACILE, BUONI PRODOTTI e SERVIZIO
EFFICIENTE!
Dzięki twojej opinii COSTWAY będzie mógłoferowaćjeszcze WYGODNIEJSZE
ZAKUPY, LEPSZE PRODUKTY i SPRAWNIEJSZĄ OBSŁUGĘ KLIENTA.
US office:Fontana
UK office: Ipswich
DE office:FDS GmbH, Neuer Höltigbaum 36, 22143 Hamburg, Deutschland
FR office : 26 RUE DU VERTUQUET, 59960 NEUVILLE EN FERRAIN, FRANCE

02 03
1. Please check the manual carefully and make sure you have received all the
parts.
2. If there is any missing, please let us know the letter of the part you need.
3. If there is any damage, please send clear photos to us, we will check and
offer you best solution soon.
ATTENTION
Assembly
1
2 3
5
6
74
Parts List
Qty
2
2
4
4
8
8
8
1
2
3
4
5
6
7
Part Name
Kayak Rack
Adjustable Back Base
Tie Down Strap
Metal Plate
Bolt
Knob
Washer
Step 1: Unlock levers on both sides of rack.

04 05
90 0
Step 2: Unfold rack. Place vertical tube in 90° position, then lock
levers on both sides.
Step 3: Place rack on cross-bar. Make sure rack end doesn’t hang
over end of cross-bar. Attach racks with hardware: Insert two bolts
through base pad. Attach metal plate, washer and then knob. Tighten
knobs on each bolt to secure rack.
Step 4: Attach the adjustable back base to cross-bar. Adjust to the
width of the boat. Fix the rack according to step 3.
Step 5: Position strap on upper section on each rack.
Step 6: Repeat Steps 1 - 5 for second rack.

06
Step 7: Wind the strap end from above the kayak to the front and place
the buckle close to the kayak.Pass the other strap end through the
bottom of crossbar and then wind the end to its top to touch the
buckle. Push the end upward into the buckle and tighten the strap.
Step 8: Fix the second kayak in the same way.
Note: When racks are not in use, fold them down in the
flat position and lock. Remove straps and store in vehicle.