Cotell WG300 User manual

1/ 6
Product Type：WG300
3G Wireless Router
Thank you for choosing the WG300 3G wireless router products! This user manual will be Win7
operating system, for example, to guide you through how to use a router to share Internet access.
Checking the Package Contents
1、WG300 802. 11n /2. 4GH z 3G Wireless Router
2、Warranty card
3、Quick Installation Guide
Hardware connection
A. WG300 access power outlet When the power will see the panel power indicator light.
B. Will connect the DSL / Cable Modem or residential broadband network cable to the WG300 Ethernet port or the
3G network card to connect to the WG300 USB port.
C. Wireless connection to the router.
Hardware Interface Description

2/ 6
Network connection diagram
Set up your computer
Noted:
Default mode is AP mode, if you want to access web page, Pls set up your PC by fixed IP(10.10.10.x)
If you Already Set WG300 in Routing Mode, pls Set the PC byObtain an IP address automatically.
1．Win 7 operating system, for example
1.1 Click“Start→Control Panel→Network and Internet→Network Connections→Wireless Network
Connection” Right-click" Wireless Network Connection "and select" Properties "
1.2 Double-click "Internet Protocol Version 4 (TCP/IPV4) "
1.3 Select"Use the following IP address"→Enter the IP address:10.10.10.5→Enter the Subnet mask:
255.255.255.0→Click OK→Return to the previous screen, click OK

3/ 6
Connect to a wireless network
1. NIC installation is successful, the lower right corner of the desktop will appear icon , click the icon
2. Select in the pop-up list of network to be connected to the wireless network, click on "Connect" button
3. When the screen displays "Connected", the computer has successfully joined the wireless netw
Login the router management interface
Open the browser, the URL in the address bar, type http:// 10.10.10.254 and press Enter.
User Name: admin
Password: admin

4/ 6
Set up the router
Router operation mode including AP mode and routing mode.
AP mode:
AP mode Plug and Play (cable network), without any configuration. Of course, we recommend that you refer to the
wireless network settings to create your secure online environment.
Routing mode:
1 ． Internet connection configuration
If the network service provider using ADSL
virtual dial-up (PPPoE) Internet connection to
select" PPPoE "
Enter the Internet account and password provided
by the network service provider
If the network service provider a static IP
Internet connection to select "Static IP"
Enter the network service provider IP address
information, the user needs to complete all required
fields.

5/ 6
If the network service providers use
dynamic IP address Internet connection,
select the "dynamic IP"
If the network service provider to use the 3G
network, connection type, select "3G mode".
Insert the USB 3G card can automatically dial-
up, no configuration. (Support of the
mainstream 3G network card brand)
2 ．Wireless network settings
The wireless network default settings, the wireless network name (SSID): 3Grouter + MAC ,
preset password Change the wireless password (recommended): In order to ensure network security, it is recommended
to change the wireless security password to prevent unauthorized allow
The Promised users connect to this wireless network.
Note: Please record the
network name (SSID) and
network key, used to
prepare the wireless card
to connect.
3 ．Setup is complete!
Confirm the settings are
correct, "Internet Protocol
Version 4 (TCP/IPV4) "
Select"Obtaion an IP address automatically"and"Obtain DNS server address automatically"→Click OK→Return to
the previous screen, click OK , you can connect to the INTERNET,

6/ 6
Appendix
FAQ Frequently Asked Questions
FAQ1：Charged in the case of the router, reset the router, using a stylus to hold down the
network port next to the reset button for 5 seconds, then release the can.
FAQ2：IE browser address bar enter 10.10.10.254 not eject the user name and password
dialog box.
A. Check whether the computer connected to the router wireless.
B. If dial-up users, please delete the broadband dial-up connection.
C. Check your IE is set to a proxy, if there is, please cancel. Click on the browser inside the
Tools --- Internet Options ---LAN Settings --- connection --- proxy server will not hook.
D. Click start --- settings --- control panel --- network connections --- Local Area Connection
(right-click select Properties), double-click Internet Protocol TCP / IP access, the relevant IP
information the following settings to determine the point.
IP address: 10.10.10.50 Subnet Mask: 255.255.255.0 Default Gateway: 10.10.10.254
The NDS: 10.10.10.254
E. Turn off the computer's firewall and antivirus software.
F. Reboot the router, disconnect the power of the router, then plug in the power later.
G. If you complete the operation still can not log into the router management interface, it is
recommended that you reset the router and reset method see FAQ1.
FAQ3: Wireless can find the signal, but connection closed
A. Delete the preferred network connection
over the information, the preferred
network blank, as shown below:
B. Please set up the router (wireless
encryption) password for the 64Bit WEP
way, typing in the address bar
10.10.10.254 log into the router
configuration interface, click "LAN Settings" in the wireless settings, security mode
option "Enable WEP open, and the location of the "WEP password" enter 10
hexadecimal characters (ie, between the numbers 0 to 9, the letters A ~ F or a ~ f any)