Coulisse ABC-02 User manual

indoor use only
1.3A
1.2A
2A
ABC-02
ABC-02_R1_
25,8
107,521,5
53,5
60
19,0
23,8
25,0
23,5
23,5
ABC-02 H34 H35
2.1A
=
=
+
+
25 x 25
19 x 27
ABC-02
ABC-02
H35
H34
2.2C
2.2B
ABC-02
H34
H35
1.5v AAA (4x)
2.2D 2.2E
Manual
Tiltmotor Venetian 19 - 25 mm
ABC-02
WARNING: Important safety instructions. Follow all instructions,
since incorrect installation can lead to severe injury.
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
WARNING:
1. General information
The ABC-02 is a complete kit to motorize the tiltfunction in 25mm venetian blinds.
The kit fits in all common headrails (25x25mm and 19x27mm). The motorunit is placed
in the headrail, the batterypack is placed with magnets outside the headrail for easy
battery access. The motorunit is operated with a Coulisse remote control only.
ABC-02
Battery type 4x AAA 1.5v alkaline (not included)
Battery life 1 year
Max. system dimensions 25mm venetian, 2,5m2(wood) - 4,5m2(alu)
Operating temperature 5 - 60°
Max. channels to pair 32 channels
1.1 General dimensions
1.2 Specifications
1.3 Interface and buttons
Indication LED
Program button
2. Assembly
(batteries not included, use 4x 1.5v alkaline AAA)
2.1 Install Motor
GB1

OF
Coulisse B.V., Vonderweg 48, 7468 DC Enter, The Netherlands
ABC-02_R1_
1. 2.
1.
2.
1.
2.
!
!
Indication LED
Program button
3. Programming and operation
Set in Program mode:
Shortly press
program button
Program mode:
blind is
stepping...
Choose channel
by pushing the channel
select button
Pair/unpair by pressing the program button
on the backside of the remote
- Pair to a channel/remote
- Manual Control
(also possible by using ‘single select’, see manual remote control*)
1 sec
Exit Program mode:
Shortly press
program button
3.3 Normal use
3.1 First use
Action confirmed:
blind stops stepping
for 3 seconds
Set in Program mode:
Shortly press
program button
Program mode:
blind is
stepping...
Press and hold the program button
until the blind stops stepping and
steps once again. (approx. 15 sec.)
- Reset to factory defaults & Erase all paired channels/remotes
Program mode:
blind is
stepping...
Press and hold the program
button until the blind stops
stepping (approx. 10 sec.)
Set in Program mode:
Shortly press
program button
- Reset to factory defaults
3.4 Reset
Press program button
for more than 2 sec.
Blind moves as long
as button is pressed
(max. 15 sec.)
For moving in opposite direction
release button and press program
button again for more than 2 sec.
>2 sec
15 sec
1 sec
6. Service & Support
Online Resources
For the latest information and updated manuals go to www.coulisse.nl.
Obtaining Warranty Service
First follow the advice in this booklet and then go to your local dealer.
If the product appears to be damaged or does not function properly, go to your local dealer
for instructions on how to obtain warranty service.
5. Safety & Cleaning
5.1 Safety
- Do not let children play with the blind and/or remote control.
- Only use powersupplies or batteries that comply with the specifications on the motor.
- In case of malfunction, unplug the device or remove the batteries and contact your dealer.
- Take care that the blind can move freely and is not blocked by objects.
- Take care that the powersupply cable is out of reach for children.
- Do not paint the device.
- Keep the device dry .
5.2 Cleaning
Follow these general rules when cleaning the outside of the device and its components:
- Make sure the device is unplugged.
- Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
- Don’t use aerosol sprays, solvents, alcohol, or abrasives.
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
WARNING:
Do not make repairs yourself. Do not attempt to open the device
or disassemble it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts are inside.
WARNING:
Disclaimer:
© Copyright Coulisse
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means,
electronic, mechanical, photocopying, recording, digital or otherwise without the written permission of the publisher.
Although this manual has been composed with the most care, Coulisse B.V. does not accept any responsibility for damage due to
mistakes and/or faults in this manual.
Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without obligation to notify any
person or entity of such revisions or changes.
The most recent version replaces older versions of this manual. The most recent version is available at ww.coulisse.nl or contact your
Coulisse contact person .
We invite you to send remarks and comments about this manual to Coulisse at [email protected].
We refer to the manual of the Coulisse Remote control to program the additional blind settings.
4. Tips & Troubleshooting
Please check www.coulisse.nl for the latest tips and troubleshooting guide.
Additional blind settings: Available
Switch rotation direction Yes
Favorite position No
BatteryMode Yes
GB1
10 sec
1 sec
3.4 Additional blind settings
3.2 Set endpositions
Position the slats in
the desired endposition.
Turn and fix stopper
1 against the bar.
Turn the slats back to
the desired endposition.
Turn and fix stopper
2 against the bar.
The endpositions
are now set.
Attention:
Not stopping the motor
when the slats are
closed may damage
the system.
OR
The ABC-02 is not compatible with the ABC-19 Domoticabox.