Coulisse CM-01 User manual

COULISSE MOTION CM-01/02 TUBULAR MOTOR
MANUAL CM-01/02
The easiest motorization
for single roller blinds
COULISSE MOTION CM-01/02 TUBULAR MOTOR
MANUAL CM-01/02
The easiest motorization
for single roller blinds

Pull
Li-ion battery
Happy programming
Favorite position
Child safe
IP 44
English
usb rechargeable
cable free
COULISSE MOTION CM-01/02 TUBULAR MOTOR
CM-01/02
Tubular motor
The easiest motorization
for single roller blinds
Safety
WARNING: Important safety instructions. Follow
all instructions, since incorrect installation can
lead to severe injury.
Do not let children play with the blind and/or
remote control.
Take care that the blind can move freely and
is not blocked by objects.
Do not paint the device.
Keep the device dry.
Do not drop, knock, or shake the device.
Rough handling can break internal circuit
boards.
Cleaning
Follow these general rules when cleaning the
outside of the device and its components:
Use a damp, soft, lint-free cloth. Avoid getting
moisture in openings.
Don't use aerosol sprays, solvents, alcohol, or
abrasives.
Service & Support
Do not make repairs yourself. Do not attempt
to open the device or disassemble it. You run
the risk of electric shock and voiding the limited
warranty. No user-serviceable parts are inside.
Warranty Service
First follow the advice in this manual. If the
product appears to be damaged or does not
function properly, go to your local dealer for
instructions on how to obtain warranty service.
WARNING
Read the instructions carefully
before assembling and using
the product. Assembling
process can be completed by
non-professionals. For indoor
use only.
Young children can strangle in
the loop of pull cords, chains
and tapes, and cords that
operate window coverings.
To avoid strangulation and
entanglement, keep cords out
of the reach of young children.
Cords may become wrapped
around a child’s neck.
Move beds, cots and furniture
away from window covering
cords.
Do not tie cords together.
Make sure cords do not twist
together and form a loop.
English
Pull Motion
Easily control your motorized blind
by pulling a chain weight or wand
Li-ion Battery
Rechargeable integrated
Li-ion battery
USB Rechargeable
Rechargeable with micro
USB cable
Happy Programming
Dummy proof programming using
the pull function of the blind
Favorite Position
Pre-set your
favorite position
Child Safe
Child safe solution
free of hazardous loops
Cable Free
Install your motorized
blind cable free

Click!
Click!
Click!
1
2
3
4
5
6
7
8
English
Charge to activate the motor
Installing the blind
COULISSE MOTION CM-01/02 TUBULAR MOTOR
Charge before first use. (See step 17)
A green LED will flash.
The motor can be used during charging.
Set bottom limit
Set upper limit
COULISSE MOTION CM-01/02 TUBULAR MOTOR
Pull and hold the chain until the blind has
reached the bottom limit.
If the blind moves in the opposite direction
release the chain and pull and hold again.
Adjust until the desired bottom limit
has been reached.
Save the position by pushing the button
until the blind moves up and down.
Pull and hold the chain until the blind has reached the
upper limit. If the blind moves in the opposite direction
release the chain and pull and hold again.
Adjust until the desired
upper limit has been
reached
English
Scan the QR code
for more information
rtube.nl/red792

9
10
11
12
13
14
English
COULISSE MOTION CM-01/02 TUBULAR MOTOR
Save the position by pushing the button until
the blind moves up and down.
Pull the chain shortly to start or stop the blind.
Pull the chain shortly to
start or stop the blind.
Operating the blind
Optional: Set the favorite position
COULISSE MOTION CM-01/02 TUBULAR MOTOR
Pull and hold the chain for approximately
7 seconds until the blind moves up and down.
Go to any position other than the saved
favorite position.
Hold the chain for 5 seconds
The blind moves to the favorite position.
Operate to favorite position
English

15
16
17
English
Delete favorite position
Delete end limits
The favorite position can only be deleted when
the blind is placed in the favorite position.
Hold the button for approximately 10 seconds,
after 5 seconds the blind will move up and
down. Keep pushing the button untill the blind
moves up and down again.
Repeat steps 9 - 12 to save new end limits.
Pull and hold the chain for approximately 7
seconds untill the blind moves up and down.
Go to step 11 to program a new favorite position.
COULISSE MOTION CM-01/02 TUBULAR MOTOR
Recharge battery
Blinking red during
operation;
Charge the battery
Blinking green;
battery is charging
Continuously green;
battery is fully charged
COULISSE MOTION CM-01/02 TUBULAR MOTOR
English

English
Disclaimer:
© Copyright Coulisse
All rights reserved. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted, in any form, by any
means, electronic, mechanical, photocopying, recording, digital or
otherwise without the written permission of the publisher.
Although this manual has been composed with the most
care, Coulisse B.V. does not accept any responsibility for damage
due to mistakes and/or faults in this manual.
Coulisse B.V. reserves the right to revise the manual and to revise
and/or changes its content at any time, without obligation to
notify any person or entity of such revisions or changes.
The most recent version replaces older versions of this manual.
The most recent version is available at my.coulisse.com or
contact your Coulisse contact person.
We invite you to send remarks and comments about this manual
to Coulisse at [email protected].
For the latest information and updated
manuals visit my.coulisse.com
COULISSE MOTION CM-01/02 TUBULAR MOTOR COULISSE MOTION CM-01/02 TUBULAR MOTOR
English

Coulisse B.V. Vonderweg 48 7468 DC Enter The Netherlands
t
[phone]
f
[phone]
e
[email protected]
coulisse.com
CM01/02-U-R1
Coulisse B.V. Vonderweg 48 7468 DC Enter The Netherlands
t
[phone]
f
[phone]
e
[email protected]
coulisse.com