
PAGE 2 OF 9
Keep the appliance area clear and free from
Fireplace.
is specified in this manual.
specified in this manual.
The burner should always be cleaned:
Disconnect it from the appliance, use a cleaner to
technician to inspect the appliance and to replace
any part of the control system and any gas
This appliance is for outdoor use only in a
illustration(s) depicting the cylinder mounted to the
appliance utilizing the cylinder retention means and
in diameter and 18 inches high. The capacity is
Locate the gas hose and make sure that it is not in any
off at the supply cylinder.
appliance.
area out of children’s reach.
the ones specified in this manual.
The cylinder used must include a collar to protect
The Procedure for Checking for Gas Leaks:
gas tank is changed, you must check for gas leaks.
Follow these three steps:
detergent and one part water.
source.
3. Apply the soap solution to all gas connections,
especially to the inlet/manifold pressure tap on the
appear in the soap solution if the gas connections
tighten gas connections, turn off the gas at the
source, disconnect the fuel line from your fireplace
and call 1-877-539-7436 for repair assistance.
WARNING
"
WARNING
"
WARNING
"
WARNING
"
The LP-gas supply cylinder to be used must be:
1. Constructed and marked in accordance with the
U.S. Department of Transportation (D.O.T.)
Specifications for LP-Gas Cylinders, or the
Transportation of Dangerous Goods; and
and;
with the ANSIZ21.97 and CSA 2.41-2014.
The installation must conform to local codes or in