Courtyard Creations KFS1389-WM User manual

PAGE 1 OF 2 COURTYARD CREATIONS INC.
STOP DON’T RETURN TO STORE!
!
!
!
!
!
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
35
Attention:
Make sure that all bolts needed for each step matches
the corresponding figure to ensure proper assembly.
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
KFS1389-WM
Step 1:
Insert the rear seat (#1) into the legs (#2). Fasten the
legs (#2) to the rear seat (#1) by using bolts (#5) and
steel washers (#7). See Figure 1.
#5 BOLT M6*35
FIGURE 1
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY
1
2
3
4
5
6
7
1
8
9
10
11
12
13
14
15
1
22
7510
4
2
4
2
1
1
1
1
17FA05040301-Y4
18000C23001
18000337006
18000337002
17KAA0201----Y4
17KAB1101----Y4
61K1389X00001BA
61K1389Y00001BA
2
1
1
4
2
4
KFS1389-CS01
KFS1389-CS02
KFS1389-CS03
KFS1389-CS04
17C02A0712003Y4
17C01A0714003Y4
17XA3309
REAR SEAT
WASHER d6.5*D13*1.0
PLASTIC NUT M6*P1.0
PLASTIC CAP M6
BOLT CAP M6
HEX.KEY WRENCH 6MM
NUT WRENCH 10&13MM
BACK CUSHION
SEAT CUSHION
LEG
FRONT SEAT
BACK ASSEMBLY
BOLT M6*35
BOLT M6*40
STEEL WASHER

#6 BOLT M6*40
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water, rinse thoroughly,and dry frame completely. Do not use
bleach, acid, or othersolvents on the frame or fabric parts.
• Cushions may be washed on the surface by only using mild soap and water or commercial foaming upholstery
cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all bolts or fasteners on a regular basis to ensure the proper performance and safety of your
lounge.
• In order to prolong the life and beauty of your lounge, we recommend that it be stored in a dry and protected
areaduring the off season periods.
FIGURE 2 FIGURE 3
FIGURE 4 Step 4:
Place the back cushion (#14) and the seat cushion (#15)
onto the lounge. Secure the cushions (#14 and #15) to
the lounge with the velcro straps. See Figure 4.
Step 3:
Fasten the back assembly (#4) to the rear seat (#1) by
using bolts (#6), washers (#8) and plastic nuts (#9).
Tighten bolts completely and cover them with the bolts
caps (#11) and plastic caps (#10). See Figure 3.
Step 2:
Insert the rear seat (#1) into the front seat (#3). Make
sure that the spring clips on the rear seat (#1) come
through the holes on the front seat (#3). See Figure 2.
STOP DON’T RETURN TO STORE!
PAGE 2 OF 2
4
2
2
1
40
14
15
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.
3
1
11 6
8
89