CowboyStudio single26kit Manual

single26kit
CowboyStudio Continuous Lighting Kit Setup Instructions
This document contains step-by-step instructions for setting up one of our continuous lighting kits. Your
kit should include:
• One (1 light stand
• One (1 soft white umbrella
• One (1 ac light socket
• One (1 compact fluorescent
light bulb
The exact contents of your kit may
vary based upon your order. Refer to
Figure 1 for the items included in the
instructional kit.
Step 1: Remove the protective cap from the top of the
light stand as shown in Figure 2.
Step 2: Loosen the wing nut at the top of the light stand
legs by turning counterclockwise as shown in Figure 3.
Expand the legs so that the light stand will stand up on its
own, and then tighten the wing nut.
Step 3: Open the flip locks on the light stand joints to
allow the light stand sections to move freely. Raise and
lower the sections of the stand to the desired height, and
close the flip locks to hold the sections in place. Refer to
Figure 4 for a detailed look at these locks.
At this point, the light should stand on its own at your
desired height, as illustrated in Figure 5.
Figure 1
Figure
2
Figure
3
Figure
4
Figure
5

Step 4: Screw the light bulb into the ac light
socket. Make sure to use the base when
tightening, not the top, as shown in Figure 6.
When done, your light bulb and ac light socket
should match Figure 7.
Step 5: Mount the ac light socket on the light
stand. Start by loosening the screw at the base
of the ac light socket. Slide the ac light socket
onto the tip of the light stand and tighten the
screw until the ac light socket fits securely as
shown in Figure 8. Your assembly should then
look like Figure 9.
Step 6: Open the umbrella and insert the stem of the umbrella into the
umbrella hole in the ac light socket until the umbrella is secure as shown in
Figure 10.
Once fully assembled, your continuous
lighting kit should match that in Figure
11. To use, plug in the cord on the ac
light socket and flip the power switch.
Figure
6
Figure 7
Figure
8
Figure
9
Figure 1
0
Figure 1
1