CPVan CP-D10 User manual

Wireless Door and Window Detector
Quick Start Guide
At a Glance
Tamper
switch
LED
Indicator
Setting/Panic
Button
Battery
receptacle
Power
on/off
Open-close
magnet

Installation
Install the detector on the door case (window frame),
and attach the magnet to the moving part of the door
(window) to the alignment mark of the detector. The
magnet should be aligned with the middle of detector
and placed within 0.6 inches (1.5cm) away from the
detector when the door or window is closed.
Note:
1. Do not install outdoors, on a weak foundation, or in a
rainy / wet location.
2. Do not place magnets or other electromagnetic
objects near the contact sensor to avoid interference
with the sensor.
Specifications
Power Supply: DC 3V (CR2032 Lithium Battery x1)
Standby Current: <8uA
Alarm Current: <15mA
Alarm Distance: >1.5cm
Transmitting Distance: <80m (Without obstacles and no
Interference)
Radio Frequency: 433Mhz
Low Power Alert: Yes
Operation Temperature: -10~55℃