Craftsman 138.37670 User manual

OPERATOR'S MANUAL
MANUEL DEL OPERADOR
ICRAFTSMAN°I
16 in. QUIET REEL MOWER
400 mm (16 pulg.) PODADORA DE CARRETE
SILENCIOSO DE 16 PULG.
Model No.
138.37670
Ndmero de modelo
138.37670
_WARNING: To reduce the risk of injury, the user must read and understand the operator's manual
before using this product.
_1, ADMERTENCIA: Para reducir el riesgo de tesiones, el usuario debe leer y comprender el manual det operador
antes de usar este producto.
Customer Help Line: 1-888-266-7096
Tel_fonodeatenci6n al consumidor: 1-888-266-7096
Sears Brands Management Corporation, Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.craftsman.com
Visite et sitio web de Craftsman: www.craftsman.com
Save this manual for future reference
Guarde este manual para futuras consulta

ENGLISH
• Warranty .................................................................. 2
• Introduction .............................................................. 2
• Safety Information ................................................ 3-4
• Symbols ............................................................... 5-6
• Features ................................................................... 6
• Assembly .................................................................. 7
• Operation ................................................................. 8
• Care and maintenance ............................................. 9
• Ulustrated parts list ........................................... 10-12
CRAFTSMAN ®TWO YEAR LIMITED WARRANTY
ESPANOL
• Garantia ............................ Secci6n de Ingles pag. 2
• Introducci6n ....................... Secci6n de Ingles pag. 2
• Informaci6n sobre seguridad ................................ 3-4
• Simbolos ............................................................. 5-6
• Caracteristicas ........................................................ 6
• Armado .................................................................... 7
• Funcionamiento ...................................................... 8
• Cuidado y mantenimiento ....................................... 9
• Figura numeras (ilustraciones) .............................. i-v
FOR TWO YEARS from the date of purchase this power tool is warranted against any defects in material or
workmanship. With proof of purchase, a defective product will be replaced free of charge.
For warranty coverage details to obtain free replacement, visit the web page: www.craftsman.com/warranty
This warranty does not cover the blades or rear bag, which are expendable parts that can wear out from normal use
within the warranty period.
This warranty is void ifthis product is ever used while providing commercial services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
GARANT|A DE CUATRO AltOS CRAFTSMAN ®
DURANTE CUATRO ANOS a partir de la fecha de adquisici6n, esta herramienta electrica cuenta con garantfa frente
a defectos de material o mano de obra. Adjuntando la prueba de compra, se reemplazara gratuitamente el producto
defectuoso.
Para detalles sobre lacobertura de la garantfa para el reemplazo gratuito, visite la pagina web: www.craftsman.com/
warranty
Esta garantfa no cubre las hojas o bolsa trasera, que son piezas consumibles que pueden desgastarse con el uso
normal durante el perfodo de garantfa.
Esta garantfa se anula si se utiliza este producto durante la prestaci6n de servicios comerciales o si se alquila a otra
persona.
Esta garantfa le otorga derechos legales especificos y tambien puede tener otros derechos que varfan de estado a
estado.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and
dependability have been given top priority in the design of this product making it easy to maintain and operate.
Esta herramienta ofrece numerosas caracteristicas para hacer ma.s agradable y placentero su uso. En el
dise_o de este producto se ha conferido prioridad a la seguridad, el desempe¢_o y la fiabilidad, per Io cual se
facilita su manejo y mantenimiento. 2 -- English

IMPORTANTSAFETY INSTRUCTIONS
_klMPORTANT! READANDUNDERSTAND
ALL INSTRUCTIONS. Failure to follow all instructions
listed below may result in electric shock, fire, and/or
serious personal injury.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases, or
dust. Power tools create sparks which may ignite the
dust or fumes.
• Avoid body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerators. There is an
increased risk of electric shock if your body is grounded.
• Never allow children to operate the equipment. This is
not a toy. Never allow adults to operate the equipment
without proper instruction.
• Keep all bystanders, children, and pets at least 50 ft.
away.
• Always wear safety glasses with side shields.
Everyday glasses have only impact resistant lenses.
They are NOT safety glasses. Following this rule will
reduce the risk of eye injury. Use face mask if operation
is dusty.
• Wear eye protection with side shields which are
marked to comply with ANSI Z87.1 when operating this
product.
• Do not expose to rain; store indoors.
• Use only as described in this manual. Use only
identical manufacturer's replacement parts and
accessories. Use of any other parts may create a hazard
or cause product damage.
• Secure long hair so it is above shoulder level to
prevent entanglement in any moving parts.
• Wear heavy long pants, boots, and gloves. Avoid loose
garments or jewelry that could get caught in moving
parts of the machine.
• Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance.
• Do not operate the equipment while barefoot or
when wearing sandals or similar lightweight footwear.
Wear protective footwear that will protect your feet and
improve your footing on slippery surfaces.
• Never place hands, fingers or feet inside the reel.
Although a motor does not power this mower, when the
wheels turn the reel spins and can cut.
• Never mow when grass is wet as it can be slippery.
• Do not use the reel mower while barefoot or while
wearing sandals.
• Walk behind, never run, while using reel mower.
• Always make sure of your footing when using this reel
mower.
• Never intentionally strike or hit trees, fences, etc. This
can cause injuries or severely damage the reel mower
mechanisms.
• Make sure your reel mower is in a safe operating
condition. Do not attempt to operate this reel mower if
damaged. Contact customer service or have the reel
mower repaired by a qualified repair service provider
before using.
• Do not force tool. Use the correct tool for your
application. The correct tool will do the job better and
safer at the rate for which it is designed.
SPECIFIC SAFETY RULES FOR REEL MOWER
_' WARNING! This symbol points out important
safety instructions, which if not followed, could
endanger the personal safety and/or property of
yourself and others. Read and follow all instructions in
this manual before attempting to operate this machine.
Failure to comply with these instructions may result in
personal injury.
,_ DANGER! This machine was built to be
operated according to the rules for safe operation in
this manual. As with any type of power equipment,
carelessness or error on the part of the operator can
result in serious injury. This machine is capable of
amputating hands and feet and throwing objects.
Failure to observe the following safety instructions
could result in serious injury or death.
_,WARNING! When using reel mowers, basic
safety precautions should always be followed to
reduce the risk of fire, electric shock, and personal
injury.
GENERAL OPERATION
Use of this reel mower should be restricted to individuals
who have read, understood and will follow the warnings
and instructions that are printed in this manual and on
the reel mower.
• Carefully read all instructions on the reel mower and in
the manual before attempting to assemble and operate
the reel mower. Keep this manual in a safe place for
future reference, and consult it regularly.
• In order to avoid contact with the blade or injury
caused by a thrown object, stay in the operating zone
behind the handles, and keep children and bystanders
at least 50 ft.(15 m) away from the mower while it is
in operation. Stop the motor immediately if someone
enters the mowing area.
3 -- English

•Thoroughly inspect the area where the reel mower is
to be used. Remove all stones, sticks, wire, toys, and
other objects that could be tripped over or thrown by the
blade. Thrown objects can cause serious personal injury.
• Plan your mowing pattern in such a way as to
avoid discharging material toward roads, sidewalks,
bystanders, etc.
• Always wear a face mask or a dust mask when
operating the mower in a dusty environment.
• Dress properly. Do not wear loose clothing or jewelry
that can get caught in moving parts. The wearing of
protective gloves and safety footwear is recommended.
• Do not use the reel mower for any job except that for
which it is intended. Do not force the reel mower.
• Avoid dangerous environments. Do not operate the
mower in the rain or in wet or damp grass.
• Mow only in daylight or in good artificial light. Do not
rush a mowing job.
• Stop machine if anyone enters the area.
• Do not pull machine backward unless absolutely
necessary. Always look down and behind before and
while moving backward.
• Never leave a running machine unattended.
• Operate machine only in daylight or good artificial light.
,_WARNING! (PROPOSITION65)
Some dust created by power sanding, sawing,
grinding, drilling and other construction activities
contains chemicals known to the state of California to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
•Lead from lead-based paints,
• Crystalline silica from bricks and cement and other
masonry products, and
• Arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemical: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
CHILD SAFETY
Tragic accidents can occur if the operator is not aware
of the presence of children.
• Keep children out of the mowing area and under the
watchful care of a responsible adult.
• Do not allow children under the age of 14 to operate
this reel mower. Children who are 14 years of age
and older must read and understand the operating
instructions and safety rules in this manual and must
be trained and supervised by a parent.
• Stay alert, and stop the reel mower if a child or any
other person enters the mowing area.
• Look behind and down for small children before and
while moving backwards.
• Use extreme care when approaching blind corners,
doorways, shrubs, trees, or other objects that may
obscure your view of a child who may run into the path
of the reel mower.
SAVE THESE INSTRUCTIONS
4 -- English

_Someofthefollowingsymbolsmaybeusedonthisproduct.Pleasestudythemandlearntheirmeaning._
Properinterpretationofthesesymbolswillallowyoutooperatetheproductbetterandsafer.
SYMBOLNAME DESlG NATION/EXPLANATION
Read The Operator's Manual To reduce the risk of injury user must read and
understand operator's manual before using this product.
Eye and Head Protection Always wear eye protection with side shields that are
marked to comply with ANSI Z87.1.
,._-_I_ Ricochet Thrown objects can ricochet and result in personal
injury or property damage.
Sharp Blade Danger - Keep hands and feet away from blade.
._MAX _s Operating on a slope Do not mow a slope that has an angle of greater than 15°,
i_i_/[, Keep Bystanders Away Keep all bystanders at least 50 ft. away.
,. j
5 I English

Thefollowingsignalwordsandmeaningsareintendedtoexplainthelevelsofriskassociatedwithth
product.
SYMBOL SIGNAL MEANING
_ID DANGER
,_ WARNING
,_ CAUTION
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION (Without Safety Alert Symbol) Indicates a situation that may
result in property damage.
PRODUCT SPECIFICATIONS
Cutting path ......................................................................................................................................... 16" (40 cm)
Height adjustments ................................................................................................................. 1 - 2" (2.6 - 5.1 cm)
Number of blades ......................................................................................................................... 5 Helical blades
Weight ........................................................................................................................................ 24.7 Ibs (11.2 kg)
KNOW YOUR LAWN MOWER
See Figure 1.
The safe use of this product requires an understanding
of the information on the product and in this operator's
manual as well as a knowledge of the project you
are attempting. Before use of this product, familiarize
yourself with all operating features and safety rules.
REAR BAG
The rear bag prevents grass clippings from being
scattered across your lawn as you mow.
HEIGHT ADJUSTMENT KNOB
The height adjustment knob provides cutting height
adjustments.
6 -- English

UNPACKING
Beforeattempting to assemble, empty carton and
compare parts with parts list below.
• Carefully remove the product and any accessories
from the box.
• Inspect the parts to make sure no breakage or
damage occurred during shipping.
• Do not discard the packing material until all parts
are examined.
• If any parts are damaged or missing, please call
1-888-266-7096 for assistance.
• Be sure to tighten the lock nuts when assembled to
prevent the handle from rocking.
PACKING LIST
See Figure 2.
• 1-Top handle
• 2-Center handle pieces
• 2-Lower handle pieces
• 8-Knobs
• 8-Carriage bolts
• 1-Reel mower body
• 1-Bar frame
• 1-Rear bag
,_IL WARNING! Do not allow familiarity with this
product to make you careless. Remember that a
careless fraction of a second is sufficient to inflict
serious injury.
• Attach the top handle subassembly previously
assembled, to the lower handle subassembly using
four carriage bolts (3) and knobs (5) provided. (Fig. 5)
• Tighten all the knobs on the joints of the handle
assembly.
ATTACHING THE HANDLE TO THE MOWER BASE
See Figure 6.
• Align holes (1) at the lower end of each handle arm
with posts (2) extending from the mower base side
plates.
• Slide lower ends of handle arms onto posts.
ATTACH THE REAR BAG
See Figure 7-10.
• Take out all components in the packing.
• Push the bar frame into the grass box tube, snap
the side fastening lugs on the grass box over the
bar frame, and snap the bottom fastening lug on the
grass box over the bar frame. (Fig. 7-8).
• Place the hooks on the rear bag onto the roller
shaft. Secure the bag to the lower handle using the
belt supplied. (Fig. 9).
• Adjust strap for proper height so the bag does not
rub the ground while mowing or transporting. (Fig.10).
WARNING! Do not use any attachments or
accessories not recommended by the manufacturer of
this product. The use of attachments or accessories
not recommended can result in serious personal
injury.
ASSEMBLING THE HANDLE
See Figure 3-5.
NOTE: Do not completely tighten bolts until assembly
is complete.
• Insert the two center handle pieces (4) into the left
and right side of the top handle (2) and secure with
two carriage bolts (3) and knobs (5) provided. (Fig. 3)
• Connect the right lower handle (6) with the left
lower handle (7) and secure with two carriage bolts (3)
and knobs (5) provided. (Fig. 4)
7 -- English

CUTTINGHEIGHT ADJUSTMENT
See Figure 11.
• Use the roller assembly to adjust the cutting height
of the mower to four positions, from 1- 2 inches (2.6 -
5.1 cm).
• For the highest cutting level, move the adjustment
knobs to position A as shown in Fig. 11.
• For the lowest cutting level, move the adjustment
knobs to position B as shown in Fig. 11.
• Set intermediate cutting heights by moving the
adjustment knobs to one of the two stops between
highest and lowest positions.
For best performance, align the edge of the cutting
b(ades to overlap the previously cut path. This wi((
ensure no grass is missed during the process.
NOTE: Do not use wheels as a reference point for
grass cut line.
MOWER BLADE ADJUSTMENTS
See Figure 12.
_k WARNING! Blades are extremely sharp.
To avoid injury, do not touch b(ades when making
adjustments.
NOTE: Blades are factory adjusted.
• Misalignment can occur, often caused by blades
being too loose or too tight. This can cause an
uneven cut or difficulty pushing the mower.
• Each end of the cutting bar is adjusted separately.
• To move the cutting bar closer to the blades turn
the adjustment screw clockwise. To move the cutting
bar away from the blades turn the adjustment screw
counterclockwise.
• When the space equals the thickness of paper (0.12
mm), insert a piece of paper between the blades and
the cutting bar, and slowly turn the wheel by hand.
• The reel should cut the paper evenly at every point.
If not, it is necessary to readjust the cutting action.
i_k CAUTION! Adjusting the screws for blade
adjustments is a very sensitive procedure. A sixteenth
of a turn is considered a major adjustment. Before
tightening one adjustment screw, make sure to loosen
the opposite screw an equal amount.
CHECKING THE ADJUSTMENT
See Figure 13.
• Turn mower upside down.
• Insert a piece of paper between cutting bar and reel
blades, and slowly turn wheel by hand.
• Each blade should cut across the paper in a
continuous line. If there are missed spots in the cut, it
is necessary to make further adjustments. See Mower
Blade Adjustments.
_k CAUTION! Do not overtighten adjustment
screws, as this could damage cutting bar. Both
screws must be tight on final adjustment.
8 -- English

•Minimum care is required to ensure smooth
operation of your mower.
• To avoid damage to mower or cutting blades, keep
area to be mowed free from debris.
• For best results, regularly apply lubricant to
mower's cutting surfaces, cutting reel axle shaft and
wheels.
SHARPENING THE CUTTING BLADES
_k WARNING! Do not place hands in the
mower near blades. If grass cuttings are compacted
in the blade area, remove using a wood or plastic
cleaning tool appropriate for the cleaning of the
blades.
• Spread a thin layer of lapping compound, available
at most hardware stores, onto the front edge of the
reel blades.
• Adjust the cutting bar so that the blade has light but
firm contact across the full width of the cutting bar.
• Turn the reel blades until the front edge of the
cutting bar blade is polished.
_k CAUTION! Do not overtighten the adjusting
screws, as this could damage the cutting bar. Tighten
both screws during final adjustment.
NOTE: Clean any grinding compound or debris from
the cutting bar blade, reel blade, pinions, and pawls.
NOTE: Use industrial or valve lapping compound
between 100 and 240 grit. Lubricate the axle and
pinion with a light film of wheel bearing grease.
CLEANING AND STORAGE
• Clean the exterior of the machine thoroughly using
a soft brush and cloth before storing. Do not use
water, solvents or polishes.
• Turn the mower on its side to clean the blade area.
• Store the mower in a dry place. Do not place other
objects on top of the mower during storage.
9 I English

_._ CRAFTSMAN16in. REEL MOWER - MODEL NUMBER 138.37670 _-_
I The model number will be found on a label attached to the motor housing. 1
TO PURCHASE REPLACEMENT PARTS, CALL 1-800-469-4663
©
10 -- English
.J

CRAFTSMAN 16in. REEL MOWER - MODEL NUMBER 138.37670
I The model number will be found on a label attached to the motor housing.
TO PURCHASE REPLACEMENT PARTS, CALL 1-800-469-4663
ITEM NO. PART NO. DESCRIPTION QTY
1 N-1 Soft grip 1
2 N-2 Top handle 1
3 N-3 Carriage Bolt 8
4 N-4 Middle handle 2
5 N-5 Knob 8
6 N-6 Left lower handle 1
7 N-7 Roller shaft 1
8 N-8 Roller 1
9 N-9 Roller shaft sleeve 2
10 N-10 Height adjustment pin 2
11 N-11 Spring 2
12 N-12 Height adjustment bracket (L) 1
13 N-13 Height adjustment knob 2
14 N-14 C-clip 2
15 N-15 Bolt 2
16 N-16 Cutting bar pivot rod 1
17 N-17 Cutting bar assy. 1
18 N-18 Blade adjustment nut 2
19 N-19 Blade adjustment spring 2
20 N-20 Blade adjustment bolt 2
21 N-21 Supporting plate (L) 1
22 N-22 Wheel assy. 2
23 N-23 Wheel cover 2
24 N-24 C-clip 2
25 N-25 Washer 2
26 N-26 Nut M8 2
27 N-27 Spring washer 2
28 N-28 Supporting assy.(L) 1
29 N-29 Washer 2
30 N-30 Lock nut M10 2
31 N-31 Gear (L) 1
32 N-32 Pin 2
33 N-33 Washer 2
34 N-34 Ball bearing 2
35 N-35 C-clip 2
36 N-36 Cylinder-blade assy. 1
37 N-37 Gear (R) 1
38 N-38 Cover assy. 1
11 I English

CRAFTSMAN16in.REEL MOWER - MODEL NUMBER 138.37670
I The model number will be found on a label attached to the motor housing.
TO PURCHASE REPLACEMENT PARTS, CALL 1-800-469-4663
ITEM NO. PART NO. DESCRIPTION QTY
39 N-39 Supporting assy. (R) 1
40 N-40 Wheel shaft 2
41 N-41 Supporting plate (R) 1
42 N-42 Washer 2
43 N-43 Height adjustment bracket (R) 1
44 N-44 Right lower handle 1
45 N-45 Bar frame 1
46 N-46 Grass bag 1
12 -- English

See this section for all of the figures referenced in the
operator's manual.
Consulte esta seccion para ver todas las figuras a las que se hace
referencia en el manual del operador.
Fig.1
H
CD
G
E
F
A- Upperhandle(Agarraderasuperior)
B- Middlehandle(Agarraderacentral)
C- Lowerhandle(Agarraderainferior)
D- Rearbag(Bolsatrasera)
E- Heightadjustmentknob(Perilla paraajustede
altura)
F- Wheel(Rueda)
G- Housing(Carcasa)
H- Bag supportbelt (Bolsacon cinta de sujeci6n)

Fig.2
J
I
E_ E_
o o c
H
G
A- Foamgrip(Asiderode espuma)
B- Tophandle(Agarraderasuperior)
C- Carriagebolts (Pernosde soporte)
D- Centerhandle pieces(Piezascentralesde la agarradera)
E- Knobs(Peritlas)
F - Rightlowerhandle(Agarraderainferiorderecha)
G- Leftlowerhandle(Agarraderainferiorizquierda)
H- Reelmowerbody (Cuerpode la podadorade carrete)
I- Barframe (Barradelmarco)
J- Rearbag(Bolsa)
Fig.3
5_
3................ 4_
4_
Fig.4

Fig.5 Fig.6
Fig.7
Fig.
1
Fig.9
Fig.10

Fig.11
C
A- TheHighestcutting position(Posici6nde corte masalta)
B- TheLowestcuttingposition (Posici6ndecorte m_s baja)
C- The Heightadjustmentknob(Perilla paraajustede altura)

Fig.12
m
A
B
CA- Adjustmentscrew (Torniltodeajuste)
B- Cuttingbar (Barrade corte)
C- Rearroller (Rodillotrasero)
Fig.14
A
A- Paper(Papei)
B- Cuttingbar (Barrade corte)

INSTRUCCIONESIMPORTANTESDESEGURIDAD
_,IMPORTANTE! LEA Y COMPRENDA
TODAS LAS INSTRUCCIONES. No seguir las
instrucciones que se enumeran a continuaci6n puede
resultar en descarga electrica, incendio y/o lesiones
personales graves.
• No utilice herramientas electricas en atm6sferas en
las que exista riesgo de explosi6n, como por ejemplo en
presencia de liquidos inflamables, gases o polvo. Las
herramientas electricas producen chispas que podrian
encender el polvo o humo.
• Evite el contacto del cuerpo con superficies
conectadas a tierra como tubes, radiadores, extractores
o refrigeradores. Existe un gran riesgo de descarga
electrica si su cuerpo tiene contacto a tierra.
• Nunca permita que los niSos utilicen el equipamiento.
Nunca permita que adultos utilicen el equipamiento sin
la instrucci6n adecuada.
• Mantenga a los transet3ntes, niSos y mascotas al
menos a 15 m de distancia.
• Utilice siempre gafas de seguridad con protecciones
laterales. Las gafas comunes s61o poseen lentes
con resistencia al impacto. Estas NO son gafas de
seguridad. Seguir esta norma puede reducir el riesgo de
lesiones oculares. Utilice una mascara si va a utilizar en
condiciones de polvo.
• Siempre use protecci6n ocular con protecci6n lateral
con la marca de cumplimiento de la norma ANSI Z87.1
• No Io exponga a la Iluvia, almacene bajo techo.
• Utilicelo s61ocome se describe en este manual. Use
s61opa[tes y accesorios de repuesto identicos a los del
fabricante. El use de cualquier otra pa[te podria causar
peligro o daSos al producto.
• Mantenga el cabello, las ropas holgadas, los dedos
y todas las partes del cuerpo lejos de las aberturas y
pa[tes en movimiento.
• Utilice pantalones largos y pesados, botas y guantes.
Evite usar ropa holgada o joyas ya que estas podrian
atraparse en las pares en movimiento de la maquina.
• Mantenga un apoyo de pies y un equilibrio adecuados.
No se extienda demasiado. Hacerlo puede causar
perdida de equilibrio.
• No utilice el equipamiento a pies descalzos o si Ileva
sandalias u otto tipo de zapato liviano similar. Use
calzado de seguridad que proteja sus pies y mejore su
equilibrio en superficies resbaladizas.
• Nunca coloque las manos, los dedos o los pies dentro
del cilindro. Ann cuando esta podadora no tiene un
motor que la accione, cuando las ruedas dan vueltas el
cilindro gira y puede co[tar.
• Nunca siegue cuando el cesped este mojado, ya que
puede estar resbaloso.
• No use la podadora de cilindro mientras usted tenga
los pies descalzos o cuando este usando sandalias.
• Mientras este usando la podadora de cilindro camine
detras de ella, nunca corra. Siempre afirme su pisada
cuando este usando esta podadora de cilindro.
• Nunca golpee o choque intencionalmente con
arboles, cercas, etc. Esto puede causar lesiones o
daSar severamente a la podadora de cilindro.
• Compruebe que su podadora de cilindro este en
condiciones seguras de funcionamiento. No intente
poneren funcionamiento esta podadora de cilindro si
esta daSada. P6ngase en contacto con el servicio al
cliente o, antes de usarla, haga que se la repare un
tecnico calificado en servicios de reparaci6n.
• No fuerce las herramientas. Utilice la herramienta
adecuada para su aplicaci6n. La herramienta apropiada
realizara un trabajo mejor y mas seguro al ritmo para la
que fue diseSada.
NORMAS ESPEC|FICAS DE SEGURIDAD PARA
LA PODADORA
,_,ADVERTENClA! estos simbolos indican
importantes instrucciones de seguridad que, si no las
sigue, podria poner en peligro su propia seguridad
y propiedad y la de otros. Lea y siga todas las
instrucciones en este manual antes de intentar usar
esta maquina. El no cumplir con estas instrucciones
podria ocasionar lesiones personales.
,_ PEI_IGRO! esta maquina se dise56 para
funcionar de acuerdo con las normas de uso seguro
que contiene este manual. Como sucede con
cualquier tipo de equipo electromecanico, un descuido
oerror del operador pueden ocasionar lesiones
graves. Esta maquina puede amputar extremidades
y arrojar objetos. El incumplimiento de las siguientes
instrucciones de seguridad podria provocar lesiones
graves o la muerte.
_kADVERTENClA! cuando utilice podadoras
electricas, tome siempre precauciones de seguridad
basicas para reducir el riesgo de incendios, descargas
electricas y lesiones personales.
FUNCIONAMIENTO GENERAL
Solo aque!las personas que leyeron, comprendieron y
que seguiran las advertencias e instrucciones impresas
en este manual y sobre la podadora deben utilizarla.
3--Espahol

• Leaatentamentetodaslasinstruccionesenla
podadorayestemanualantesdeintentarensamblar y
usar la podadora. Guarde el manual en un lugar seguro
y consL_ltelo regularmente en el futuro.
• Para evitar el contacto con la cuchilla o lesiones
ocasionadas por un objeto lanzado, permanezca en la
zona de operaci6n detras de la podadora y mantenga
tanto a nii]os como transeQntes a al menos 15 m (50
pies) de distancia siesta funcionando. Detenga el motor
de inmediato si alguien entra en el area de poda.
• Inspeccione minuciosamente el area donde se utilizara
la podadora. Elimine piedras, palos, cables, juguetes y
otros objetos con los que alguien se pueda tropezar o
que la cuchilla pueda lanzar. Los objetos que lance la
podadora pueden ocasionar lesiones personales graves.
• Establezca su patr6n de poda de tal manera que
evite descargar material del lado de calles, aceras,
transe_ntes, etc.
• Siempre utilice un mascara si usa la podadora en
condiciones de polvo.
• Use ropa adecuada. No use ropa holgada o joyas
que pueden atraparse en las partes en movimiento Se
recomienda el uso de guantes de protecci6n y calzado
de seguridad.
• No use la podadora en tareas diferentes para la que
fue disefiada. No fuerce la podadora.
• No ponga las manos ni los pies cerca de piezas
rotatorias o debajo de la plataforma de corte. El contacto
con las cuchillas puede producir la amputaci6n de
manos y pies.
• Corte el cesped s61amente con luz de dia o una buena
luz artificial. No apresure el trabajo de poda.
• Detenga la maquina si alguien entra en el area.
• No tire la podadora hacia atras a menos que sea
absolutamente necesario. Siempre mire hacia abajo y
hacia atras antes de moverla hacia atras.
• Nunca deje de supervisar una maquina en
funcionamiento.
• Use la maquina s61amente con luz de dia o una buena
luz artificial.
_kADVERTENCIA (PROPUESTA 65)
Algo del polvo provocado por las lijas, sierras,
trituradoras y taladros electricos, y otras actividades
de construcci6n Contiene quimicos reconocidos como
causantes de cancer y defectos congenitos u otros
dafios en el aparato reproductivo. Algunos ejemplos de
estos quimicos son:
• plomo de pinturas con base de plomo
• silice cristalina de ladrillos, cemento y otros productos
de mamposteria
• arsenico y cromo de madera tratada con quimicos
El riesgo que corre a la exposici6n de estos quimicos
varia dependiendo de la frecuencia con que realiza
estos tipos de trabajos. Para reducir la exposici6n a
estos quimicos: trabaje en un area bien ventilada y
con el equipamiento de seguridad aprobado, come por
ejemplo mascaras especialmente disefiadas para filtrar
lasparticulas microsc6picas.
SEGURIDAD DE LOS NII_IOS
Pueden ocurrir accidentes tragicos si el operador no
esta atento a la presencia de nifios.
• Mantenga a los nifios fuera del area de trabajo y
bajo estricta vigilancia de un adulto responsable.
• No permita que nifios menores de 14 afios usen esta
podadora. Los nifios de 14 afios o mas deben leer y
corn prender las instrucciones de funcionamiento y las
normas de seguridad en este manual, ademas de ser
entrenados y supervisados por sus padres.
• Este alerta y detenga el cortacesped helicoidal si
un nifio o cualquier otra persona ingresan al area de
trabajo.
• Antes y mientras se esta moviendo hacia atras, mire
hacia abajo y atras y verifique que no haya nifios.
• Tenga extremo cuidado cuando se acerque a
esquinas ciegas, entradas de puertas, arbustos,
arboles u otros objetos que puedan bloquearle la vista
de un nifio que pudiera correr hacia la podadora.
GUARDAR ESTAS INSTRUCCIONES
4--Espahol

_Esposiblequeseempleenenesteproductoalgunosdelossiguientessimbolos.Lesuplicamosestudiarlos_
yaprendersusignificado.Unacorrectainterpretaci6ndeestossimboloslepermitirautilizarmejoryde
maneramasseguraelproducto.
SiMBOLONOMBRE DENOMINAClO N/EXPLICACI6N
Lea el manual del operador Para reducir el riesgo de lesiones, el usuario debe leer y
comprender el manual del operador antes de usar este
producto.
OProtecci6n ocular Siempre use protecci6n ocular con protecci6n lateral con
la marca de cumplimiento de la norma ANSI Z87.1
,_ Rebote Cualquier objeto lanzado puede rebotar y producir lesiones
personales o da_os fisicos.
Hoja Afilada Peligro - Para evitar una lesion grave, no toque la hoja
que corta la cuerda.
'.Ax_5 uncionamiento en terrenos No corte la grama en terrenos inclinados mayores de 15 °.
inclinados.
_.. Mantenga alejadas alas Mantenga a los circunstantes a una distancia minima de
personas presentes 15 m (50 pies).
5--Espahol