Craftsman 320.16492 User manual

HEAVY DUTY TOOL STAND
Model No. 320. 16492
_WARNING" To reduce the risk of injury,
the user must read and understand the
Operator's Manual before using
this product.
,A WARNING: To reduce the risk of injury,
the user must always read and follow
all instructions in the bench top tool
operating manual before mounting the
tool to this stand.
• WARRANTY
• SAFETY
• ASSEMBLY
• DESCRiPTiON
•OPERATION
•MAINTENANCE
• ESPA_IOL
Sears Brands Management Corporation, Hoffman Estates,
IL 60179 U.S.A.
www,ctaftsman,com

Warranty Page 2
Safety Symbols Pages 4-5
Safety Instructions Page 6
Description Page 7
Assembly pages 8-9
Operation Pages 10-13
Maintenance Page 14
Parts List Pages 15-16
CRAFTSMAN ONE YEAR FULL WARRANTY
FOR ONE YEAR from the date of purchase, this product is warranted
against any defects in material or workmanship. A defective product will be
replaced free of charge.
For warranty coverage details to obtain free replacement, visit the web
site: www.craftsman.com
This warranty is void if this product is ever used while providing commercial
services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
This has many features for making its use more pleasant and enjoyable. Safety,
performance, and dependability have been given top priority in the design of this
product making it easy to maintain and operate.
SAVE THESE iNSTRUCTiONS!
READ ALL iNSTRUCTiONS!
Page 2 16492 ManuaLRevised_12 0528

_,WARNING: Some dust created by power sanding, sawing, grinding, drilling
and other construction activities contains chemicals known to the state of
California to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints,
Crystalline silica from bricks and cement and other masonry products,and
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemical: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles.
The purpose of safety symbols is to attract your attention to possible dangers.
The safety symbols and the explanations with them deserve your careful
attention and understanding. The symbol warnings do not, by themselves,
eliminate any danger. The instructions and warnings they give are no substitutes
for proper accident prevention measures.
16492 Manual_Revised_12 0528 Page 3

,_ WARNING: Be sure to read and understand all safety instructions in this
Operator's Manual, including all safety alert symbols such as "DANGER",
"WARNING", and "CAUTION" before using this stand. Failure to follow all
instructions listed below may result in electric shock, fire, and/or serious
personal injury.
SYMBOL SIGNAL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION; may
be used in conjunction with other symbols or pictographs.
,_ DANGER: Indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
,_ WARNING: Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
_, CAUTION: Indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
Damage prevention and Information Messages
These inform the user of important information and/or instructions that could
lead to equipment or other property damage if they are not followed. Each
message is preceded by the word "NOTICE", as in the example below:
NOTICE: Equipment and/or property damage may result if these instructions are
not followed.
,_, WARNING: To ensure safety and reliability, all repairs should be performed
by a qualified service technician.
,_k WARNING: The operation of any power tools can result in
foreign objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shield
and a full face shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye protection that is
marked to comply with ANSI Z87.1.
Page 4 16492 ManuaLRevised_12 0528

SAVE THESE iNSTRUCTiONS
Some of the following symbols may be used on this tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to
operate the tool better and more safely.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
====== Direct Current Type or a characteristic of current
n o No Load Speed Rotational speed, at no load
] Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed,
orbits, etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp
locations.
To reduce the risk of injury, user must
Read The Operator's Manual read and understand operator's manual
before using this product.
O Always wear safety goggles or safety
Eye Protection glasses with side shields and a full face
shield when operating this product.
_1_ Alert Precautions that involve
Safety your safety.
Failure to keep your hands away from the
No-Hands Symbol blade will result in serious personal injury.
No-Hands Failure to keep your hands away from the
Symbol blade will result in serious personal injury.
Failure to keep your hands away from the
No-Hands Symbol blade will result in serious personal injury.
Failure to keep your hands away from the
No-Hands Symbol blade will result in serious personal injury.
To reduce the risk of injury or damage,Hot Surface avoid contact with any hot surface.
16492 Manual_Revised_12 0528 Page 5

GENERAL SAFETY RULES
,_ WARNING: Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
READ AND SAVE THESE iNSTRUCTiONS
,_ WARNING: Do not modify this tool and/or used it for any application other
than that for which it was designed.
• Know your stand. Do not attempt to assemble or operate your stand until
you have read the safety instructions in this section.
Only use your stand on a hard, dry and fiat surface.
= Do not load the stand with more than 330 ibs.
= Do not stand or climb on the stand, it could tip over causing serious injury.
= Do not permit children to use the stand unsupervised, it is not a toy.
= Be sure all locking pins are in the set=up position holes before using
your power tool and stand.
• Unplug your power tool before moving or repositioning it.
= Always firmly attach any bench top tool used with this stand. Do not
attempt to use your stand until the bench top tool is fastened firmly.
= Always keep all guards in place. Be sure all power tool guards are in good
working order and are in proper adjustment and alignment.
= Always keep your hands away from the cutting area.
Page 6 16492 ManuaLRevised_12 0528

KNOW YOUR HEAVY DUTY TOOL STAND (Fig. 1}
Fig. 1 support bars
Frame Assem bl_
including legs
Table Support (Short)
Locking lever
PRODUCT SEPCIFICATIONS
Weight 27.3 Ibs
Height 29 inches
Maximum Load Capacity 330 Ibs
16492 Manual_Revised_12 0528 Page 7

A
J& WARNING: If any parts are broken or missing, do not attempt to operate the
bench top tool stand until the broken or missing part is replaced. Failure to do
so could result in serious injury.
,_ WARNING: Do not attempt to modify this bench top tool stand or create
accessories not recommended for use with this bench top tool stand. Any such
alteration or modification is misuse and could result in a hazardous condition
leading to serious injury.
UNPACKING
* Carefully remove all the parts and accessories from the carton. Make sure
that all items listed in the packing list are included.
* Inspect the stand carefully to make sure no breakage or damage occurred
during shipping.
* Do not discard the packing material until you have carefully inspected and
satisfactorily operated the stand.
* If any parts are damaged or missing, please return the stand to the place
of purchase.
Page 8 16492 ManuaLRevised_12 0528

PACKAGE CONTENTS AND HARDWARE
item Description
B
C
Frame assembly, including legs 1
Quick-release mounting bracket 2
Cross support bar
D _ Mounting bolt 4
E (_ Washer 4
F O Self-locking washer 8
G @ Nut 8
H _ Screw 4
J (_ Washer 4
Qty.
16492 Manual_Revised_12 0528 Page 9

A
_& WARNING: Do not use this stand as scaffolding or as a ladder. Make sure
to tighten the locking knob securely prior to use. Maximum capacity is 330 Ibs.
Power tools on the stand should not exceed a combined overall height of 60
inches from the floor.
UNFOLD THE WORK LEGS
1. Place the frame assembly with
legs (A) upside down on a flat
surface as shown in Fig. 2.
Fig. 2
2. Open the top two legs, press the
locking pins and rotate the legs
until the locking pins snap into
the open position and you hear a
"click" to signal that the legs are
locked in place (Fig. 3).
3. Open and lock the other two
legs the same way.
4. Place the frame assembly on
a flat surface as shown
in Fig. 4.
Press locking
3in to move leg
F'
Page 10 16492 ManuaLRevised_12 0528