Craftsman 172.24360 User manual

Owner's Manual
10-in. Compound
Miter Saw
Double Insulated
Model No,
172.24360
g
Save this manual for future reference.
CAUTION: Read, understand and follow
all Safety Rules and Operating Instructions
in this manual before using this product.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Visit the Craftsman web page: www.sears.com/craftsman
•SAFETY
•FEATURES
• ADJUSTMENT
•OPERATION
•MAINTENANCE
° PARTS LIST
•ESPANOL

Warranty. ........................................................... Page 2
Safety Instructions .......................................... Pages 3 - 11
Safety Symbols ........................................... Page 10
Glossary of Terms ....................................... Pages 10-11
Product Specifications and Unpacking ............. Pages 11-12
Labels ............................................................... Pages 12-13
Loose Parts and Tools Needed ......................... Page 14
Description ........................................................ Pages 15-19
Adjustments ...................................................... Pages 19-27
Operation ...................................................... Pages 28-38
Maintenance ..................................................... Pages 38-39
Accessories ....................................................... Page 39
Repair Parts ...................................................... Pages 40-44
FULLONE-YEARWARRANTY
If this product fails due to a defect in materials or workmanship within
one year from the date of purchase, Sears will repair it free of charge.
Warranty service is available by returning this product
to the nearest Sears Service Center in the United States.
If this product is used for commercial or rental purposes,
this warranty applies only for 90 days from the date of purchase.
This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
SAVE THESE INSTRUCTIONS!
READ ALL INSTRUCTIONS!
.............................................................................................................................................................................................................. i

Z_WARNING: BE SURE to read and understand all safety instructions
in this manual, including all safety alert symbols such as DANGER,
WARNING and CAUTION, BEFORE using this saw.
Failure to follow all instructions listed below may result in electric shock,
fire and/or serious personal injury.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers.
The safety symbols, and the explanations with them, deserve your careful
attention and understanding. The safety warnings DO NOT by themselves
eliminate any danger. The instructions and warnings they give are no
substitutes for proper accident prevention measures.
SYMBOL
Ak
/k
/k
MEANING
SAFETY ALERT SYMBOL: Indicates danger, warning or caution.
May be used in conjunction with other symbols or pictographs.
DANGER: Failure to obey a safety warning will result in
serious injury to yourself or to others. Always follow the safety
precautions to reduce the risk of fire, electric shock and personal injury.
WARNING: Failure to obey a safety warning can result in
serious injury to yourself or to others. Always follow the safety
precautions to reduce the risk of fire, electric shock and personal injury.
CAUTION: Failure to obey a safety warning may result
in property damage or personal injury to yourself or to others.
Always follow the safety precautions to reduce the risk of fire,
electric shock and persona_ injury.
NOTE: Advises you of information or instructions
vital to the operation or maintenance of the equipment.
/'rk WARNING: The operation of any saw can result in
foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool
operation, ALWAYS wear safety goggles or safety glasses
with side shield and a full face shield when needed. We
recommend A Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shield,
both available at Sears Retail Stores. ALWAYS wear eye
protection which is marked to comply with ANSI Z87.1.
3

ELECTRICAL SAFETY
1. Double Insulated tools are equipped with a polarized plug (one blade
is wider than the other).Thls plug will fit in a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install a polarized
outlet. DO NOT change or alter the plug in any way.
2. Double insulationu eliminates the need for the three wire grounded power
cord and grounded power supply system. Applicable only to Class II
(double insulated) tools.
3. Before plugging in the tool, BE SURE that the outlet voltage supplied is
within the voltage marked on the tool's data plate. DO NOT use "AC only"
rated tools with a DC power supply.
4. ALWAYS avoid body contact with grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is grounded.
5. If operating the power tool in damp locations is unavoidable,
ALWAYS use a Ground Fault Circuit Interrupter to supply power
to your tool. ALWAYS wear electrician's rubber gloves and footwear
in damp conditions.
6. DO NOT expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
7. ALWAYS periodically inspect tool cords and extension cords for
damage. Have damaged cords repaired at a Sears Service Center.
BE SURE to stay constantly aware of the cord location and keep it
well away from the moving blade.
8. ALWAYS use the proper extension cord. and MAKE SURE the cord is
in good condition. ONLY USE a cord that is heavy enough to carry the
current your tool will draw. An undersized cord will cause a current drop
in line voltage resulting in a loss of power and overheating. A wire gauge size
AWG (American Wire Gauge) of at least 14 is recommended for an extension
cord 25 feet or less in length. If in doubt, use the next heavier size. Smaller
gauge wires, have greater capacity (14 gauge wire has more capacity than
16 gauge wire).
9. DO NOT abuse the cord. NEVER use the cord to pull the plug from the
outlet. Keep cord away from heat, o11,sharp edges or moving parts.
Replace damaged cords Immediately. Damaged cords increase the
risk of electric shock.
10. When operating apower tool outside, ALWAYS use an outdoor extension
cord marked "W-A" or "W". These cords are rated for outdoor use and
reduce the risk of electric shock.
4
............................................................................................................................................................................................................. i..

WORK AREA SAFETY
1. ALWAYS keep your work area clean and well lit. DO NOT leave tools or
pieces of wood on the saw while it is in operation. Cluttered benches and
dark areas invite accidents.
2. DO NOT operate power tools In explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
3. ALWAYS keep bystanders, children and visitors away while operating a
power tool. Distractions can cause you to lose control.
4. ALWAYS make your workshop childproof with padlocks and master
switches or by removing starter keys.
5. ALWAYS make sure the work area has ample lighting so you can see the
work and that there are no obstructions that will interfere with safe operation
BEFORE using your saw.
PERSONAL SAFETY
1. ALWAYS know your power tool. Read the operator's manual carefully,
learn the saw's applications and limitations, as well as, the specific potential
hazards related to this tool.
2. ALWAYS stay alert, watch what you are doing and use common sense
when operating a power tool. DO NOT use tool while tired or under the
influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
3. ALWAYS dress properly. DO NOT wear loose clothing, gloves, neckties,
rings, bracelets or other jewelry that can get caught and draw you into
moving parts. Non-slip footwear is also recommended. Pull back long
hair. Keep your hair, clothing and gloves away from moving parts.
Loose clothing, jewelry or long hair can be caught in moving parts.
4. ALWAYS remove adjusting keys or wrenches before turning the tool on.
A wrench or a key that is left attached to a rotating part of the tool may result
in personal injury.
5. ALWAYS wear safety glasses with side shields. Everyday eyeglasses
have only impact resistant lenses, they are NOT safety glasses.
6. ALWAYS wear a dust mask to keep you from inhaling fine particles.
7. ALWAYS protect your hearing. Wear hearing protection during extended
periods of operation.
8. ALWAYS secure your work. Use clamps or a vise to hold work when
practical. It is safer than using your hand and frees both hands to operate tool.
9. DO NOT overreach. ALWAYS keep proper footing and balance at all
times. Proper footing and balance enables better control of the tool in
unexpected situations
5

PERSONAL SAFETY cont.
10. ALWAYS avoid accidental starting.
BE SURE switch Is in the "Off" posVaonbefore plugging In.
11. NEVER stand on tool. Serious injury could occur if the tool is tipped or
if the blade is accidentally contacted.
TOOL USE AND CARE SAFETY
1. NEVER leave the tool running unattended. ALWAYS turn it off.
DO NOT leave the tool until it comes to a complete stop.
2. DO NOT use the tool if the switch does not turn tt "On" or "Off". Any
tool that cannot be controlled with the switch is dangerous. ALWAYS have
defective switches replaced at a Sears Service Center.
3. ALWAYS disconnect the plug from the power source before making any
adjustments, changing accessories or storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.
4. ALWAYS store idle tools out of the reach of children and other
untrained persons. Tools are dangerous in the hands of untrained users.
5. ALWAYS maintain tools with care. Keep cutting tools sharp and clean.
Properly maintained tools with sharp cutting edges are less likely to
bind and are easier to control. Follow instructions for lubricating and
changing accessories.
6. DO NOT force the tool, it will do the job better and more safely at the
rate for which it was designed.
7. ALWAYS use the right tool for the job. DO NOT force the tool or attachment
to do a job itwas not designed for. Use it only the way it was intended.
8. Before using this saw, ALWAYS check for damaged parts, including
guards for proper operation and performance. Also ALWAYS check the
alignment of moving parts, binding of moving parts, breakage of parts,
saw stability, mounting and any other condition that may affect the
tool's operation. If damaged, have the tool serviced at a Sears Service
Center before using. Many accidents are caused by poorly maintained tools.
J/_WARNING: USE OF ACCESSORIES THAT ARE NOT I
I
RECOMMENDED FOR USE WITH THIS TOOL MAY CREATE I
A HAZARDOUS CONDITION.
9. ALWAYS use only accessories that are recommended for this tool.
Using improper accessories may cause the risk of serious injury.
See accessories section of this manual for proper accessories.
.................................................................................................................................................................................................................. i

ADDITIONAL SPECIFIC SAFETY RULES FOR MITER SAWS
1. Know your power tool. Read operator's manual carefully. Learn the
applications and limitations, as well as the specific potential hazards
related to this tool. Following this rule will reduce the risk of electric
shock, fire or serious injury.
2. ALWAYS firmly clamp or bolt your miter saw to a workbench or table
at approximately hip height.
3. ALWAYS be sure that all adjustments are secure BEFORE making a cut.
4. ALWAYS make sure that the miter table and saw (bevel function) are
locked in position BEFORE operating your saw. Lock the motor table by
securely tightening the miter lock handle. Lock the saw arm (bevel function)
by securely tightening the bevel lock knob.
5. ALWAYS use a clamp to secure the workpiece, when possible.
6. ALWAYS be sure the blade path is free of nails. ALWAYS carefully inspect
lumber and remove all nails BEFORE cutting.
7. ALWAYS be sure that the blade clears the workpiece. NEVER start the
saw with the blade touching the workpiece. ALWAYS allow the motor to come
up to full speed BEFORE starting a cut.
8. ALWAYS support long workpieces when cutting to minimize the risk of
the blade pinching or kickback. The saw may slip, walk or slide while
cutting long or heavy boards.
9. NEVER use a length stop on the free (scrap end) of aclamped workpiece.
NEVER hold onto or bind the free scrap end of the workpiece in any operation.
If a work clamp and length stop are used together, THEY MUST BOTH BE
INSTALLED on the same side of the saw table to prevent the saw from
catching the loose end and kicking up.
10. NEVER cut more than one piece at a time. DO NOT STACK more than
one workpiece on the saw table at a time.
11. ALWAYS avoid awkward operations and hand positions where a sudden
slip could cause your hand to move into the blade. ALWAYS make
sure that you have good balance. NEVER operate your saw on the floor
or in a crouched position.
12. NEVER stand or have any part of your body in line with the path of the blade.
13. ALWAYS only use the correct blades. Use the right blade size, style and
cutting speed for the material and the type of cut. DO NOT use blades with
incorrect size holes. NEVER use blade washers or blade bolts that are
defective or incorrect. The maximum blade capacity for this saw is 10 inches.
7

ADDITIONAL SPECIFIC SAFETY RULES FOR MITER SAWS cont.
14. ALWAYS keep blades clean, sharp and with the sufficient set.
Sharp blades minimize stalling and kickback.
15. DO NOT use dull or damaged blades. Bent blades can break easily,
or cause kickback.
16. DO NOT remove the saw's blade guards. NEVER operate the saw with
any guard or cover removed. MAKE SURE that all guards are operating
properly BEFORE each use.
17. NEVER hand hold a workplece that is too small to be clamped.
ALWAYS keep your hands clear of the '_o hands' zone.
18. NEVER perform any operaUon freehand. ALWAYS place the workpiece
to be cut on the miter table and position it firmly against the fence as a
backstop. ALWAYS use the fence.
19. ALWAYS keep your hands away from cutting area. DO NOT reach under
the material being cut or in the blade's cutting path with your fingers or hand
for any reason. ALWAYS turn the power off.
Z_WARNING: Blade continues to turn after power to saw cuts off.To avoid
possible serious injury, after releasing trigger switch to cut power, allow the saw
blade to stop rotating BEFORE raising the blade out of the workpiece.
20. NEVER reach behind, under or within three inches of the blade and its
cutting path with your hands or fingers for any reason.
21. NEVER reach to pick up a workpiece, a piece of scrap, or anything else
that is in or near the cutting path of the blade.
22. NEVER, for any reason, touch the blade or other moving parts during use.
23. ALWAYS release the power switch and allow the saw blade to stop
rotating BEFORE raising it out of the workpiece.
24. DO NOT turn the motor switch on and off rapidly. This could cause the
blade to loosen which could create a hazard. Should this ever occur, stand
clear and allow the saw blade to come to a complete stop. Disconnect the
saw from the power source and securely tighten the blade bolt.
25. ALWAYS turn off the saw before disconnecting it to avoid accidental
starting when reconnecting the saw to a power supply. NEVER leave
the saw unattended while connected to a power supply.
26. NEVER lift this tool by gripping the sliding miter fence.
27. SAVE THESE INSTRUCTIONS. Refer to them frequently and use them
to instruct others who may use this tool. If someone borrows this tool,
make sure they have these instructions also.
............................................................................................................................................................................................................................ i

ADDITIONAL SPECIFIC SAFETY RULES FOR MITER SAWS cont.
Z_ WARNING: Some dust partlcles created by power sanding,
sawing, grlndlng, drilllng and other construction jobs contain
chemlcals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
•Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending upon how often you do this
type of work. To reduce your exposure to these chemicals:
•Work in a well-ventilated area.
• Work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic
particles.
Z_ WARNING: The operation of any saw can
result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before
beginning power tool operation, ALWAYS wear
safety goggles or safety glasses with side shield
and a full face shield when needed. We recommend
aWide Vision Safety Mask for use over eyeglasses
or standard safety glasses with side shield, both available
at Sears Retail Stores.
SERVICE SAFETY
1. If any part of this miter saw is missing or should break, bend, or fail in
any way; or should any electrical component fail to perform properly:
ALWAYS shut off the power switch and remove the miter saw plug from
the power source and have the missing, damaged or failed parts
replaced BEFORE resuming operation.
2.Tool service must be performed only at a Sears Service Center. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
3.When servicing a tool, ALWAYS use only identical replacement parts.
Follow instructions in the Maintenance Section of this manual. Use of
unauthorized parts or failure to follow Maintenance Instructions may create
a risk of electric shock or injury.
9

SERVICESAFETYcont.
Thelabelon yourtool may Include the following symbols.
V........................................................................... Volts
A........................................................................... Amperes
Hz......................................................................... Hertz
W.......................................................................... Watts
mln ....................................................................... Minutes
"_" ........................................................................ Alternating current
----===--................................................................... Direct current
no ........................................................................ No-load speed
[] ........................................................................ Class II construction
.../rain ................................................................... Revolutions or
reciprocation per minute
./_ ...................................................................... Indicates danger, warning
caution. It means attention!!f
Your safety is involved.
IMPORTANT! READ ALL INSTRUCTIONS
GLOSSARY OF TERMS FOR WOODWORKING
Arbor
The shaft on which a blade or cutting tool is mounted.
Bevel Cut
Acutting operation made with the blade at any angle other than
90 ° to the miter table.
Cross Cut
A cutting or shaping operation made against the grain of the workpiece.
Compound Miter Cut
Acompound miter cut is acut made using a miter angle and bevel
angle at the same time.
Freehand
Performing acut without using a fence, miter gauge, fixture, work clamp, or
other proper device to keep the workpiece from twisting or moving during the cut.
Gum
A sticky, sap-based residue from wood products.
Miter Cut
Acutting operation made with the blade at any angle other than 90°to the fence.
Resin
A sticky, sap-based substance that has hardened.
Revolutions per Minute (RPM)
The number of turns completed by a spinning object in one minute.
Saw Blade Path
The area over, under, behind, or in front of the blade, as itapplies
to the workpiece°That area which will be or has been cut by the blade.
10

GLOSSARY OF TERMS FOR WOODWORKING cont.
Set
The distance that the saw blade tooth is bent
(or set) outward from the face of the blade.
Throw-Back
Throwing of aworkpiece in a manner similar to a kickback. Usually associated
with a cause other than the kerr closing, such as a workpiece not being against
the fence, being dropped into the blade, or being placed inadvertently in contact
with the blade.
Through Sawing
Any cutting operation where the blade extends
completely through the thickness of the workpiece.
Workpiece
The item on which the cutting operation is being done. The surfaces of a
workpiece are commonly referred to as faces, ends and edges.
Throat Plate
Aplastic throat plate inserted in the miter table that allows for blade clearance.
No Hands Zone
The area between the marked lines on the left and right side of the miter table
base. This zone is identified by no hands zone labels placed inside the marked
lines on the miter table base.
11

Your Compound Miter Saw has been shipped fully assembled,
except for the blade, miter lock handle, dust guide and dust bag.
1. Remove all packing materials from around your saw.
2. Carefully lift the saw from carton and place it on a level work surface.
The saw is heavy, so get help, if you need it, to help avoid injuring your back.
3. Do not discard the packing materials until you have carefully inspected
the saw for loose or damaged parts and successfully operated the saw.
4. This saw has been shipped with the saw arm secured in the down position.
To release the saw arm, push down on the top of the saw arm and cut the
tie wrap. Lift the saw arm by the handle.
IMPORTANT: Keep hand pressure on the saw arm while cutting
the tie wrap to prevent it from suddenly raising the wrapping iffully cut.
5. Carefully inspect all parts of the saw to make sure that no breakage
or damage has occurred during shipping.
/_WARNING: If any parts are missing, DO NOT operate this toot until
the missing parts are replaced. Failure to do so could result in possible
serious injury.
The following labels appear on your miter saw. These labels are there to
warn you of possible dangerous situations. Failure to follow the warnings
could result in serious injury.
Label #1 (see fig. 1)
Label #2 (see fig. 1)
Label # 3 (see fig. 1)
DANGER
KUP HANDS
AWAY
FROM
12

Label#4 (see fig. 2)
rZ_WARNING /ADVERTENCIA •
• For your safety, read owner's manual
before operating metersaw,
• Para su seguridad, lea el manual del usuario
antes de usar la sierra ingletadora,
,,Wear eye protection.
• Keep hands out of path of saw blade.
• Do not operate saw withoutguards in place.
•Do not perform any operation freehand.
•Never reach around the saw blade,
• Turn off tool and wait for saw blade to stop
before moving workpiece or changing settings.
•Disconnect the saw from the power source
before changing blades or servicing.
••Do not expose to rainor use in damp places. ,_
Label #5 (see fig. 2)
10-inch Compound Miter Saw
DoubleInsulated5000RPM120VOLTS60HZACONLY14A
[_,WARNING WHEN SERVICING, USE ONLYIDENTICAL
!. CRAFTSMAN REPLACEMENT PARTS.
.OO,L,O.2-°oI '
MADE tN CHtNA S_ARSf ROEBUCK AND CO.
13

fig.3
The followsitemsare includedwi_ your compoundmiter saw.
•10-1nchSaw Blade • Dust Bag
•Miter Lock Handle • Vex:Adapter
•Hold-Down Clamp
•BladeWrench
*He_ Key
• Owners Manual
DuM _ren
Beg
ch
Clamp U
Z_IWARNING: The use ofattachments or acsessodes that are not recommended I
might be dangerous and coud cause sar ous personal injury. I
I
riga
The followingtools are not included, but are needed for
installingthe blade and for makingadjustments on your saw.
CO
dJustable Wrench
Combination
Squam
Framing Square 14 Phillips Screwdrlver

KNOWYOURSAW(see fig. 5)
Your miter saw has many built-in convenience features for fast, efficient cutting.
Before attempting to use your saw, familiarize yourself with all of the operating
features and safety requirements.
IZ_WARNING: DO NOT allow familiarity with your saw to make
you careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
14-,Amp Motor
This powerful motor provides sufficient power to handle awide variety
of heavy-duty cutting jobs. It has permanently lubricated ball bearings
for long life and smooth operation,
10-inch Blade
The blade included with your compound miter saw will cut avariety
of materials up to 5 1/2 in. wide and 3 1/2 in. thick, depending upon
the angle at which the cut is made.
CUTTING CAPACITIES
When the miter angle (miter table) is set at 0°
and the bevel angle is set at 0°:
Your saw will cut materials up to a maximum of 51/2 in. wide x 3t/2 in. thick.
When the miter angle (miter table) is set at 45°
and the bevel angle is set at 0°:
Your saw will cut materials up to a maximum of 41/8 in.wide x 31/2 in. thick.
When the miter angle (miter table) is set at 0°
and the bevel angle is set at 45°:
Your saw will cut materials up to a maximum of 51/2 in. wide x 19/16in, thick.
When the miter angle (miter table) is set at 45 °
and the bevel angle is set at 45°:
Your saw will cut materials up to a maximum of 41/8 in. wide x 19/16in. thick.
15

KNOWYOURSAWcont, (seefig,5)
Flg.5 Upper
Blade Guard
Dust Bag
Saw Arm
Motor Housing
Lower Blade Guard
Fence
Dust
Guide
for Vac
Hook-up
"No Hands Zone" Label
Hands Zone"
Boundary Line
Throat Plate
Miter
Table Frame Positive
Stops
Miter
Lock Handle
Lock Knob
16

KNOWYOURSAW cont.
Carrying Handle (see fig. 6)
Yourmitersaw has abuilt-in carrying
handle on the topofthesaw armfor easy,
convenienttransportingfromonejob site
to another.Beforecarryingthesaw:
1. Shutolf the power and pulloutthe plug.
2. Lowerthe saw arm and lock itin
the down position.
3. Tolock saw arm, push the lock pin.
Miter Lock Handle (see fig. 6)
The miter lock handlesecurelylocks
your saw at the desired miter angle.
Spindle Lock Button (see fig. 7)
The spindle lock button on yoursaw
allowsyou tolockthespindlethatkeeps
thebladein yoursawfrom rotating,Only
depressand holdthelockbutton when
installing,changingorremovingtheblade.
Trigger Switch (see fig. 7)
To turnon the saw, squeeze the
triggerswitch.Release switch
toshut off.
Positive Stops on Miter Table
The miter table has a miter scale that
is color coded 1or easy reading. It has
miter indexes at 0°, 15°, 22.5 °, 30° and
45° leftand right with positive stops at
0°, 15°, 22.5 °, 30° and 450 for exact
miter cuts.
17

KNOWYOURSAWcont.
BevelLockKnob
The bevel lock knob securely locks your compound miter saw at the desired bevel angles.
Positive stop adjustment screws have been provided on each side of the saw arm. These
adjustment screws are for making fine adjustments at 0° and 45°. See pages 29 to 31.
Miter Fence
Hold the workpiece securely against the miter fence when making all cuts.
The leftside is larger to provide additional support.
Self-Retracting Lower Blade Guard
The lower blade guard ismade of shock-resistant, see-through plasticand itprovidesprotection
from each side of blade. It retracts over the upper blade guard as blade is lowered intothe workpiece.
Id ={e,_l[Cj I,,'] d=[I] Id[€/Z_][_ !
Blade Diameter 10 in.
Blade Arbor 518in.
No-Load Speed 5000 RPM
Ratin_l 14 Amperes
Input 120 Volts, 60 Hz AC Only
Mounting Holes (see fig. 8)
Your compound miter saw should be permanently mounted to a firm, stable supporting surface,
such as a workbench, Four bolt holes have been provided in the saw base for this purpose.
Each of these four mounting holes should be securely bolted using 3/8-in. machine bolts, lock
washers and hex nuts (not included). Bolts should be long enough to fit through the saw base,
lock washers, hex nuts and the thickness of the workbench.
Tighten all four bolts securely.
The hole pattern for an 18 x 24-in. workbench is shown in Figure 8. Carefully check the
workbench after mounting the saw to make sure that no movement can occur during use. If
any tipping, sliding or walking is noted, secure the workbench to the floor before operating.
F- 7,'16" Diam. Hole
i_WARNING:
ALWAYS make sure yourcompound
miter sew is securelymounted to a
workbenchor an approved workstand.
Failure to do so could resultin an
accident, resulting in possible serious
personal injury.
18

KNOWYOURSAWcont.
ElectricalConnection
Yoursawhasaprecision-builtelectricmotor.Itshouldbeconnectedtoapower supply that is
120 volts, 60 Hz AC only (normal household current), DO NOT operate this tool on direct
current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat.
Ifyour tool does not operate when plugged into an outlet, double-check the power supply.
I,/_WARNING: DO NOT attempt to modify this tool or create accessories not I
I
recommended for use with this tool, Any such alteration or modification is a misuse t
and could result in ahazardous condition leading to possible serious personal injury.
I,/_WARNING: To prevent accidental starting that could cause possible serious I
I
personal injury,ALWAYS assemble all parts to your saw BEFORE connecting it to the I
power supply. The saw should NEVER be connected to a power supply when you are
assembling parts, making adjustments, installingor removing blades, or when not in use.
Your compound miter saw has been factory assembled and adjusted. The blade, miter
lock handle, dust guide and dust bag are the only parts that have to be installed.
TO INSTALL MITER
LOCK HANDLE (See Fig. 9)
1, Place the threaded stud on the
end of the miter lock handle into
the threaded hole in the control arm.
2. Turnclockwise totighten,
TO INSTALL DUST BAG OR VAC
ADAPTER (See Fig. 10))
This miter saw comeswitha dust bag and
a vacadapter to helpyoukeepthe work
area clean. The dustbag isidealfor smaller
jobs. Usethevac adapter tohook up your
saw toawet/dry vac(soldseparately).
Attaching the Dust Bag
1. Place theopenend of thedust bag over
the exhaustportin theupperblade guard.
Attaching the Vac Adapter
The vac adapter can be used with most
weVdry vacs.
1. Place the end of the vac adapter marked
INSERT over the exhaust portin the upper
blade guard,
2. Turn the adapter so theopen end is facing
down or toward the rear of the saw.
DustBag
19

SQUARINGTHE SAW BLADETOTHE FENCE (See Figs. 11 -14)
1. Unplug the saw.
/KWARNING: Failure to unplug your saw could result in accidental
starting causing possible serious personal injury!
2. Loosen (unscrew) the Miter Lock
Handle approximately one-half turn.
3. Depress the Miter Lock Plate and
rotate the Miter Table until the
pointer is at 0°.
4. Release the Miter Lock Plate and
securely tighten the Miter Lock
Handle.
5. Loosen the Bevel Lock Handle.
6. Rotate the Bevel Rotating Housing
so the pointer is at 0°. Tighten Bevel
Lock Handle.
7. Pull the saw arm "down" and
engage the lock pin. Saw arm
should now be in the transport
or storing position.
8. Now lay a framing square flat on
the miter table, placing one
leg of square flat up against the
Fence and the other leg flat
up against the saw blade
(See Fig. 11).
L
NOTE: Be sure that the square contacts the flat side of the blade, not the carbide teeth.
This can be easily done by easing the saw arm down with the blade in the throat plate
until the carbide teeth are below the table.
9. If the edge of the framing square is not parallel to the saw blade when it is flat up against
the fence, Ihen some simple adjustments can be made. (See Fig. 12).
10. Rotate one side of the entire miter saw up about 45" off of the surface you are working on
to expose the underside of the saw (See Fig. 13).
2O