Craftsman 138. 99005 User manual

OPERATOR'S MANUAL
MANUEL DEL OPERADOR
IERRFTSHRN I
10 Amp ELECTRIC LINE TRIMMER
PODADORA ELI_CTRICA DE 10 Amp
Model No.
138. 99005
NQmero de modelo
138. 99005
AWARNING: To reduce the risk
of injury, the user must read and
understand the operator's manual
before using this product,
AADVERTENCIA: Para reducir el
riesge de lesiones, et usuario debe leer
y comprender el manual del operador
antes de usar este producto.
Customer Help Line: 1-888-288-7098
Tel_fonodeatenci6n al consumidor: 1-888-266-7096
Sears Brands Management Corporation, Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.craftsman.com
Visite et sitio web de Craftsman: www.craftsman.com
Save this manual for future reference
Guarde este manual para futuras consulta
s
218549

ENGLISH
• Warranty ................................................................... 2
• Introduction ............................................................... 2
• Important safety instructions/Electrical .................. 3-5
• Symbols ................................................................... 6
• Features .................................................................... 7
• Assembly ............................................................... 7-8
• Operation ............................................................. 8-11
• Maintenance ...................................................... 11-12
• Illustrated parts list.................................................. 13
• Figure numbers (illustrations) ................................. i-ill
ESPANOL
• Garantfa .................................................................... 2
• Introducci6n .............................................................. 2
• Instrucciones importantes de seguridad ............... 3-5
• Sfmbolos .................................................................. 6
• Caracterfsticas .......................................................... 7
• Montaje .................................................................. 7-8
• Funcionamiento .................................................... 8-11
• Mantenimiento .................................................... 11-12
• Lista de piezas ........................................................ 13
• NOmero de imagen (ilustraciones) .......................... i-ill
CRAFTSMAN ®TWO YEAR LIMITED WARRANTY
FOR TWO YEARS from the date of purchase this product is warranted against any defects in material or
workmanship. With proof of purchase, a defective product will be replaced free of charge. For warranty coverage
details to obtain free replacement, visit the web page: www.craftsman.com/warranty
This warranty does not cover the spool of trimmer line, which is an expendable part that can wear out from normal
use within the warranty period.
This warranty is void ifthis product is ever used while providing commercial services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
GARANT|A DE DOS AI_IOS CRAFTSMAN®
DURANTE DOS ANOS a partir de la fecha de adquisicbn, este producto cuenta con garantia frente a defectos de
material o mano de obra. Adjuntando la prueba de compra, se reemplazara gratuitamente el producto defectuoso.
Para detalles sobre la cobertura de la garantia para el reemplazo gratuito, visite la pagina web: www.
craftsman.corn/warranty
Esta garantfa no cubre el carrete de hilo de corte, que es una pieza fungible que puede desgastarse por el uso
normal dentro del periodo de garantfa.
Esta garantfa se anula si se utiliza este producto durante la prestaci6n de servicios comerciales o si se alquila a otra
persona. Esta garantfa le otorga derechos legales especificos y tambien puede tener otros derechos que varfan de
estado a estado.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and
dependability have been given top priority in the design of this product making it easy to maintain and operate.
Esta herramienta ofrece numerosas caracteristicas para hacer ma.s agradable y placentero su uso. En el
dise_o de este producto se ha conferido prioridad a la seguridad, el desempe¢_o y la fiabilidad, por Io cual se
facilita su manejo y mantenimiento.
2 -- English

Whenusinganelectricalappliance,basicprecautions•
shouldalwaysbefollowed,includingthefollowing:
_ll W,,&,RNING.Readandunderstandall
instructionsbeforeusingthisstringtrimmer.
Knowyourstringtrimmer.Readoperator'smanual
carefully.Learnitsapplicationsandlimitations,as
wellasthespecificpotentialhazardsrelatedtothis
stringtrimmer.Followingthisrulewillreducethe
riskofelectricshock,fire,orseriousinjury.
Donotleavestringtrimmerunattended.
Donotallowchildrenoruntrainedindividualsto
usethisunit.
Donotallowtobeusedasatoy.Closeattentionis
necessarywhenusedbyornearchildren.
Useonlyaccessoriesthatarerecommendedby
themanufacturerforyourmodel.Accessories
thatmaybesuitableforonestringtrimmermay
createariskofinjurywhenusedonanotherstring
trimmer.
•Do not handle or string trimmer with wet hands.
• Do not put any object into openings. Do not use
with any opening blocked; keep free of dust, lint,
hair, and anything that may reduce air flow.
• Do not force tool. Use the correct tool for your
application. The correct tool will do the job better
and safer at the rate for which it is designed.
• Do not operate the equipment while barefoot
or when wearing sandals or similar lightweight
footwear. Wear protective footwear that will
protect your feet and improve your footing on
slippery surfaces.
• Keep hair, loose clothing, fingers, and all parts of
body away from openings and moving parts.
• Turn off all controls before removing battery.
• Do not operate string trimmer in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. String trimmer
create sparks which may ignite the dust or fumes.
• Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
Keep bystanders, children, and visitors at least
50 ft. away while operating a string trimmer.
Distractions can cause you to lose control.
Stay alert, watch what you are doing and use
common sense when operating a string trimmer. Do
not use string trimmer, while tired, upset, or under
the influence of drugs, alcohol, or medication. A
moment of inattention while operating string trimmer
may result in serious personal injury.
• Store idle appliances - When not in use, string
trimmer should be stored indoors in a dry, locked
place out of the reach of children.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing, and gloves away
from moving parts. Loose clothes, jewelry, or long
hair can be caught in moving parts.
• Secure long hair above shoulder level to prevent
entanglement in moving parts.
• Avoid accidental starting.
• Use safety equipment. Always wear eye protection
that complies with ANSI Z87.1.
• Dust mask, non-skid safety shoes, or hearing
protection must be used for appropriate conditions.
• Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be
drawn into air vents.
•Do not use on a ladder, rooftop, tree, or other
unstable support. Stable footing on a solid surface
enables better control of the string trimmer in
unexpected situations.
• Do not use string trimmer if switch does not turn it
on or off. A string trimmer that cannot be controlled
with the switch is dangerous and must be repaired.
• Such preventive safety measures reduce the risk of
starting the string trimmer accidentally.
3 -- English

• Checkformisalignmentorbindingofmoving
parts,breakageofparts,andanyothercondition
thatmayaffectthestringtrimmer'soperation.If
damaged,havethestringtrimmerservicedbefore
using.Manyaccidentsarecausedbypoorly
maintainedstringtrimmers.
• Keepthestringtrimmeranditshandledry,clean
andfreefromoilandgrease.Alwaysuseaclean
clothwhencleaning.Neverusebrakefluids,
gasoline,petroleumbasedproducts,oranystrong
solventstocleanyourstringtrimmer.Following
thisrulewil(reducetheriskoflossofcontroland
deteriorationoftheenclosureplastic.Alwayswear
safetyglasseswithsideshields.Everydayglasses
haveonlyimpactresistantlenses.TheyareNOT
safetyglasses.Followingthisrulewillreducethe
riskofeyeinjury.
• Alwaysweareyeprotectionwithsideshields
markedtocomplywithANSIZ87.1alongwith
hearingprotectionwhenoperatingthisequipment.
• Protectyourlungs.Wearafaceordustmaskifthe
operationisdusty.Followingthisrulewillreduce
theriskofseriouspersonalinjury.
• Protectyourhearing.Wearhearingprotection
duringextendedperiodsofoperation.Following
thisrulewillreducetheriskofseriouspersonal
injury.
Don'texposestringtrimmerstorainorwet
conditions.
Waterenteringastringtrimmerwillincreasethe
riskofelectricshock.
Wearheavylongpants,longsleeves,boots,an
gloves.Avoidloosegarmentsorjewelrythatcould
getcaughtinmovingpartsofthemachineorits
motor.
• Donotoperatetheequipmentwhilebarefoot
orwhenwearingsandalsorsimilarlightweight
footwear.Wearprotectivefootwearthatwill
protectyourfeetandimproveyourfootingon
slipperysurfaces.
• Keepfirmfootingandbalance.Donotoverreach.
Overreachingcanresultinlossofbalance.
• Checktheworkareabeforeeachuse.Removeall
objectssuchasrocks,brokenglass,nails,wire,or
stringwhichcanbethrownorbecomeentangled
inthemachine.
Donotpointthestringtrimmerinthedirectionof
peopleorpets.
Neverruntheunitwithouttheproperequipment
attached.Whennotinuse,stringtrimmershould
bestoredindoorsinadry,lockedupplace--outof
thereachofchildren.
•Keep all bystanders, children, and pets at least 50
ft. away.
• String trimmer service must be performed only by
qualified repair personnel. Service or maintenance
performed by unqualified personnel may result in
a risk of injury.
• Save these instructions. Refer to them frequently
and use them to instruct others who may use this
tool. Ifyou loan someone this tool, loan them these
instructions also.
4 -- English

CALIFORNIA PROPOSITION 65
_, WARNING: This product and some dust created by power sanding, sawing, grinding, drilling, and
other construction activities may contain chemicals, including lead, known to cause cancer, birth defects or
other reproductive harm. Wash hands after handling.
Some examples of these chemicals are:
1. lead from lead-based paints,
2. crystalline silica from bricks and cement and other masonry products, and
3. arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out microscopic particles.
EXTENSION CORDS
When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has
the capacity to handle the current the product will draw. An undersized cord will cause a drop in line voltage, resulting
in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord.
Only round jacketed cords listed by Underwriter's Laboratories (UL) should be used.
When working outdoors with a product, use an extension cord that is designed for outside use.
This type of cord is designated with "W-A" or "W" on the cord's jacket. Before using any extension
cord, inspect it for loose or exposed wires and cut or worn insulation.
**Ampere rating(on productdata plate)
0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0
Cord Length Wire Size (A.W.G.)
25' 16 16 16 16 14 14
50' 16 16 16 14 14 12
100' 16 16 14 12 10 --
**Usedon 12 gauge -20 amp circuit. NOTE:AWG =American Wire Gauge
,_k WARNING: Keep the extension cord clear ofthe working area.Position thecord so that it will not
getcaught on lumber, tools, or other obstructions while you are working with a power tool. Failure to doso
can result in serious personal injury. Check extension cords before each use. If damaged replace
immediately. Never use the product with a damaged cord since touching the damaged area could
cause electrical shock resulting in serious injury.
SAVE THESE INSTRUCTIONS
5 -- English

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
dl_ Indicates an imminently hazardous situation, which, if not avoided, will result
DANGER: in death or serious injury.
_1, Indicates a potentially hazardous situation, which, if not avoided, could result
WARNING: in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
,_ minor or moderate injury.
CAUTION:
CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
min Minutes Time
,_, Alternating Current Type of current
Direct Current Type or a characteristic of current
IH
[] Class II Construction Double-insulated construction
Speed speed, at no
No Load Rational load
/min Per Minute Revolutions, strokes, surface speed, orbits etc.,
per minute
O Wet Conditions Alert Do rain in locations
not expose to damp
or use
Read The Operator's Manual To reduce the risk of injury user must read and
understand operator's manual before using this
product.
Eye Protection Wear eye protection when operating
this equipment.
_i, Alert Precautions that involve
Safety safety.
your
Long Hair Failure to keep long hair away from the air inlet
could result in personal injury.
Loose Clothing Failure to keep loose clothing from being drawn
into air intake could result in personal injury.
Keep Bystanders Away Keep bystanders at away.
all least 50 ft.
6-- English

PRODUCT SPECIFICATIONS
Input ....................................................................................................................................... 120V, AC only, 60Hz, 10Amps
String Cutting Width ....................................................................................................................................................... 18 in.
String Diameter ................................................................................................................................................ 0.080 in. max.
Weight ........................................................................................................................................................................ 9.70 Ibs.
KNOW YOUR TRIMMER
See Figure 1,page L
The safe use of this product requires an understanding of the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating
features and safety rules.
UNPACKING
This product requires assembly.
•Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
•Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
•Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
•If any parts are damaged or missing, please call
1-888-266-7096 for assistance.
,_I_WARNING: Do not use this product if any
parts on the packing list are already assembled
to your product when you unpack it. Parts on
this list are not assembled to the product by the
manufacturer and require customer installation.
Use of a product that may have been improperly
assembled could result in serious personal injury.
PACKING LIST
•Power Head • Front Handle • Straight
Shaft Trimmer Attachment • Grass Deflector
• Operator's Manual
,_, WARNING: If any parts are damaged or
missing do not operate this product until the parts
are replaced. Use of this product with damaged
or missing parts could result in serious personal
injury.
_ILWARNING: Do not attempt to modify this
product or create accessories not recommended
for use with this product. Any such alteration
or modification is misuse and could result in a
hazardous condition leading to possible serious
personal injury.
_,WARNING: Do not connect to power supply
until assembly is complete. Failure to comply
could result in accidental starting and possible
serious personal injury.
INSTALLING AN ATTACHMENT TO THE POWER
HEAD (See Figure 2, page ii.)
,_WARNING: Read and understand entire
Operator's Manual for each optional attachment
used on this power head and follow all warnings
and instructions. Failure to follow all instructions
may result in electric shock, fire and/or serious
personal injury.
,_I_WARNING: This electric power head is
designed to be only used with the attachment
models that are specified in this Operator's
Manual. It is not designed to be used with brush
cutters or other attachment models. Use of other
attachments could cause serious personal injuries
or property damage.
,_I_WARNING: Never install, remove, or adjust
any attachment while power head is running.
Failure to stop the motor can cause serious
personal injury. Never operate power head
without an attachment.
71 English

ATFACHINGTHESTRAIGHT SHAFT
ATTACHMENT (See Figure 2, page ii.)
•Unplug the power head.
• Loosen the knob on the coupler and remove the
hanger cap from the attachment.
• Push in the button located on the attachment
shaft, Align the button with the guide recess on
the power head coupler and slide the two shafts
together. Rotate the attachment shaft until the
button locks into the positioning hole.
NOTE: If the button does not release completely
in the positioning hole, the shafts are not locked
into place. Slightly rotate from side to side until the
button is locked into place.
• Tighten the knob securely.
,_, WARNING: Be certain the knob is fully
tightened before operating equipment; check
it periodically for tightness during use to avoid
serious personal injury.
AnACHING THE FRONT HANDLE
(See Figure 3, page ii.)
• Unplug the power head.
• Press the front handle onto the power head shaft
so that the handle is angled toward the rear handle.
• Place the front handle along the power head shaft
to a position that allows for comfortable operation.
• Slide the bolt through the holes in the front handle.
• Slide the washer onto the bolt.
• Place the wing nut onto the bolt and tighten the
wing nut securely.
A'R-ACHING THE GRASS DEFLECTOR(See Figure
4, page ii.)
NOTE: Install the grass deflector before the
attachment is connected to the power head.
• Remove the wing screw from the grass deflector.
• Insert the tab on the mounting bracket in the slot
on the grass deflector.
• Align the screw hole in the mounting bracket with
the screw hole in the grass deflector.
• Insert the wing screw through the mounting
bracket and into the grass deflector.
• Tighten the screw securely.
,_, WARNING: Read and understand entire
Operator's Manual for each optional attachment
used on this power head and follow all warnings
and instructions. Failure to follow all instructions
may result in electric shock, fire and/or serious
personal injury.
,_ WARNING: Do not allow familiarity with
product to make you careless. Remember that a
careless fraction of a second is sufficient to inflict
serious injury.
_, WARNING: Always wear eye protection with
side shields marked to comply with ANSI Z87.1.
Hearing and/or head protection may also be
required depending on the type of attachment
used and as prescribed in the attachment's
Operator's Manual. Failure to do so could result
in objects being thrown into your eyes and other
possible serious injuries.
,_ WARNING: Do not use any attachments
or accessories not recommended by the
manufacturer of this product. The use of
attachments or accessories not recommended
can result in serious personal injury.
CONNECTING TO POWER SUPPLY(See Figure 5,
page ii.
The power head is designed with a cord retainer that
prevents the extension cord from being pulled loose
while using.
• Form a loop with the end of the extension cord.
• Insert loop portion of extension cord through pening
in the bottom of the rear handle and place over cord
retainer.
• Slowly pull loop against cord retainer until the slack
is removed.
• Plug power head into extension cord.
8 -- English

NOTE:Failuretoremoveallexcesscordslack
fromextensioncordretainercouldresultinplug
looseningfromreceptacle.
LOCK-OUTBU'l-rON(SeeFigure 6, page ii.)
The lock-out button reduces the possibility of
accidental starting. The lock-out button is located
on the handle above the switch trigger. The lock-
out button must be depressed before you pull the
switch trigger. The lock resets each time the trigger
is released.
,_I, WARNING: Extreme care must be taken
when using a blade attachment to ensure safe
operation. Read the safety information for safe
operation when using a blade attachment and
refer to the safety rules and instructions in
your attachment manual. Never use a brush
cutter attachment with this electric power head.
Improper operation of a blade or any attachment
could result in serious injury.
CUTTING TIPS(See Figure 8. page iii.)
STARTING AND STOPPING THE TRIMMER(See
Figure 6,page ii.)
• To start the power head: Depress the lock-out
button and squeeze the switch trigger.
• To stop the power head: Release the switch
trigger.
OPERATING THE TRIMMER((See Figure 7,page iii.)
_L WARNING: Motor housing may become
hot during operation. Do not rest or place your
arm, hand, or any body part against the motor
housing during operation. Only hold the unit
during trimmer operation with all body parts clear
of motor housing (or as shown in the applicable
attachment Operator's Manual). Extended
contact with the motor housing may result in
burns or other injuries.
,_, WARNING: Always position the unit on the
operator's right side. The use of the unit on the
operator's left side will expose the user to hot
surfaces and can result in possible burn injury.
,_ WARNING: To avoid burns from hot
surfaces, never operate unit with the bottom of
the motor above waist level.
• Avoid hot surfaces by always keeping the tool
away from your body.
• Keep the trimmer tilted toward the area being cut;
this is the best cutting angle.
• The trimmer cuts best when passing the unit
from right to left. This will avoid throwing debris at
the operator. Avoid cutting in the hazardous area
shown. Cutting in the hazardous area can result in
debris flying directly at the operator.
•Use the tip of string to do the cutting; do not force
string head into uncut grass.
• Wire and picket fences cause extra string wear
and breakage. Stone and brick walls, curbs, and
wood may wear string rapidly.
• Avoid trees and shrubs. Tree bark, wood
moldings, siding, and fence posts can easily be
damaged by the string.
,_, WARNING: When servicing, use only
identical replacement parts. Use of any other
parts may create a hazard or cause product
damage.
Hold the power head with your right hand on the
rear handle and your left hand on the front handle.
Keep a firm grip with both hands while in operation.
Power head should be held at a comfortable
position with the rear handle about hip height.
Always operate power head at full throttle. If
debris becomes wrapped around the attachment,
RELEASE THE SWITCH TRIGGER, unplug the
unit, and remove the debris.
A WARNING: Always wear safety goggles or
safety glasses with side shields that comply with
ANSI Z87.1 during power tool operation or when
blowing dust. If operation is dusty, also wear a
dust mask.
,_ WARNING: Always hold the power head
away from the body keeping clearance between
the body and the product. Any contact with the
attachment cutting head can result in burns and/
or other serious personal injury. 9 -- English

INSTALLINGPRE-WOUND SPOOL IN STRING
HEAD(See Figure 9.page iii.)
Use only pre-wound spool with .080 inch (2.0mm)
diameter monofilament line.
•Unplug the power head from the power supply.
Hold the string head and unscrew the spool cap.
•To remove the spool cap, turn it clockwise.
• Remove and do not discard the spring from the
empty spool. Insert the spring into the new spool.
• To install the new spool, make sure the two lines
are captured in the slots opposite each other on
the new spool. Make sure the ends of each line
are extended approximately 6 in. (152mm) beyond
each slot.
• Thread the lines into the eyelets in the string
head. Carefully push the spool into the string head
(gently pull the lines to the outside if necessary).
When the spool is positioned in the string head,
grasp the lines and pull sharply to release them
from the slots in the spool.
• Push down and turn the spool counterclockwise
until it no longer turns. Hold tile spool down and
rotate clockwise a small amount. Release the spool.
The spool should be locked down in the string
head. If not, hold down and rotate until locked.
• Make sure the string head and the spool are
installed on the drive shaft.
• To install the spool cap, turn the spool cap
counterclockwise.
• Pull the lines again to rotate the spool into cutting
position. Push the spool cap down while pulling on
the line ends to manually advance the lines and to
check for proper assembly of the string head.
WINDING LINE ONTO EMPTY SPOOL
Use only .080in (2.0ram) diameter monofilament
line.
• To remove the spool cap, turn it clockwise.
• Remove and do not discard the spring from the
empty spool.
• Remove any excess line from the spool. Insert
tip of new line into spool. Wind the line around the
spool one section at a time(see Figure 11, page iii).
Once one section is complete, lock the line into the
slot and repeat for the second section.
• To install the new spool, make sure the two lines
are captured in the slots opposite each other on
the spool. Make sure the ends of each line are
extended approximately 6 in. (152mm) beyond
each slot.
• Thread the line ends into the eyelets in the string
head. Carefully push the spool into the string
head (gently pull the line ends to the outside if
necessary).
• When the spool is positioned in the string head,
grasp the line and pull sharply to release them from
the slots in the spool
• Push down and turn the spool counter clockwise
until it no longer turns. Hold the spool down and
rotate clockwise a small amount. Release the spool.
The spool should be locked down in the string
head. If not, hold down and rotate until locked.
• Make sure the string head and the spool cap are
installed on the drive shaft
• To install the spool cap, turn the spool cap counter
clockwise.
• Pull the string again to rotate the spool into cutting
position. Push the spool cap down while pulling on
the line ends to manually advance the line and to
check for proper assembly of the string head.
UNTANGLING THE TRIMMING LINE
• Unplug the power head and remove the spool.
• Unwind the line until the spool is no longer
tangled.
• Attach line ends into spool slots and reinstall the
spool.
10 -- English

ADVANCING THE TRIMMING LINE
•Lower the rotation speed of the string trimmer by
gradually releasing tension on the trigger.
• When the rotation speed is low, bump the spool
cap on the ground to extend the line.
• Press down on the trigger to increase the rotation
speed and continue trimming.
LINE TRIMMING CUT-OFF BLADE
(See Figure 10. page iii.)
The trimmer is equipped with a line trimming cut-
off blade on the grass deflector. Replace the string
when trimming efficiency diminishes. This will
maintain best performance.
_, WARNING: When servicing, use only
identical replacement parts. Use of any other
parts may create a hazard or cause product
damage.
,_ WARNING: Always wear eye protection with
side shields marked to comply with ANSI Z87.1,
along with hearing protection. Head protection
may also be required depending on the type
of attachment used and as prescribed in the
attachment's Operator's Manual. Failure to do
so could result in objects being thrown into your
eyes and other possible serious injuries.
,_ WARNING: Before inspecting, cleaning, or
servicing the machine, shut off motor, wait for all
moving parts to stop, and disconnect extension
cord. Failure to follow these instructions can
result in serious personal injury or property
damage.
GENERAL MAINTENANCE(See Figure 4, page ii.
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from
various types of commercial solvents and may be
damaged by their use. Use clean cloths to remove
dirt, dust, lubricant, grease, etc.
_, WARNING: Do not at anytime let brake
fluids, gasoline, petroleum-based products,
penetrating lubricants, etc., come in contact with
plastic parts. Chemicals can damage, weaken
or destroy plastic which may result in serious
personal injury.
You can often make adjustments and repairs
described here. For other repairs, have the power
head serviced by an authorized service dealer.
11 -- English

CLEANINGTHEPOWERHEAD
•Stopthemotoranddisconnectfrompowersupply.
•Cleandirtanddebrisfromthepowerheadusinga
dampclothwithamilddetergent.
NOTE:Donotuseanystrongdetergentson
theplastichousingorthehandle.Theycanbe
damagedbycertainaromaticoilssuchaspineand
lemon,andbysolventssuchaskerosene.
STORINGTHETRIMMERHEAD
•Storethetrimmerheadinawell-ventilatedplace
thatisinaccessibletochildren.
•Keepawayfromcorrosiveagentssuchasgarden
chemicalsanddeicingsalts.
PROBLEM CAUSE SOLUTION
Motor fails to start when switch
trigger is depressed
Power cord is not plugged in
Power cord connection is loose
Receptacle has no power
available
Attach extension cord
Securely install the power cord to the
trimmer plug
Be sure that the extension cord has
no other connections except to the
trimmer.
Spool cap witt not come off
The spool cap is not being turned
in the correct direction
The inner spool cap bolt may be
stripped, which will not allow the
cap to be removed.
The spool cap removes in a clockwise
rotation and tightens in a counter-
clockwise rotation
The spool cap will have to be fully
replaced. To remove the cap if it is
stripped catt the tott free customer hetp
line for assistance: 1-888-266-7096
Line does not advance There is no tine in the spool
housing o Add new spool line or spool replacement cartridge
Motor runs but the spool or
attachment does not run
Line is tangled inside the spool
housing
Motor shaft is not properly
connected to the trimmer shaft.
Disconnect the motor shaft assembly,
then reconnect it to the lower trimmer
shaft. Check to see if itworks. If
it does not work catt the tott free
customer help tine for assistance:
1-888-266-7096
12 -- English

CRAFTSMAN 10A STRING TRIMMER - MODEL NUMBER 138. 99005
The model number will be found on a label attached to the shaft, Always mention the model number
when calling to order replacement parts. To order parts, call 1-888-266-7096.
Encontrardt el nQmero de modelo en la etiqueta pegada al eje. Indique siempre el nQmero de modelo
cuando Ilame para encargar piezas de repuesto. Para encargar piezas Ilame al 1-888-266-7096.
PARTS LIST
ITEM NO. PART NO. DESCRIPTION
1 31114714 Power head assembly.
2 34103511-1 Auxiliary handle assembly.
3 31103524-2 Trimmer head assembly.
4 31107524-1 Guard assembly.
13 -- English

See this section for all of the figures referenced in the
operator's manual.
Consulte esta seccion para ver todas las figuras a las que se hace
referencia en el manual del operador.
Fig.1
\\\,C
A- Lock out Button
B- Cord retainer
C- Trigger Switch
D- Auxiliary Handle
E- Coupler
F- Trimmer shaft
G- Grass deflector
H- String head
I - Spool cap

Fig.2
Fig.3
FRONT HANDLE
Fig,4 Fig,5
TAB
Fig.6
LOCK OFF BUTTON
SWITCH TRIGGER

Fig.7 Fig.8
Fig.9
Fig.10
HAZARDOUS CUTTING AREA
DIRECTION OF ROTATION
BEST CUTTING AREA
SPOOL CAP
SLOTS _ ........_R_NG
_T_NG ....... _S_T_ _
-_ LINE
Fig.11
SECTION 2 /
CUT OFF BLADE

Cuando se utiliza un aparato electrico, siempre deben •
seguirse las precauciones bAsicas, incluyendo las
siguientes:
,_ ADVERTENCIA: Lea y comprenda todas
las instrucciones antes de usar esta podadora.
• Conozca su podadora con hilo. Lea con atenci6n
el manual del usuario. Familiarfcese con sus •
aplicaciones y limitaciones, asf como los riesgos
potenciales especfficos relacionados con esta
podadora. Siguiendo esta regla reducira el riesgo •
de descargas electricas, incendios o lesiones
personales graves.
• No deje la podadora con hilo sin vigilancia.
• No permita que ni_os o individuos sin experiencia
utilicen este aparato. •
• No permita que se utilice como juguete. Es
necesario prestar mucha atenci6n cuando se •
utiliza cerca de ni_os. •
• Utilice s61o los accesorios recomendados por
el fabricante para su modelo. Accesorios que
pueden ser adecuados para una podadora
pueden crear riesgo de lesi6n cuando se utilizan
en otra podadora.
• No manipule la podadora con las manos mojadas.
• No coloque ningun objeto en las aberturas. No Io
use con ninguna abertura bloqueada, mantengalo
libre de polvo, pelusas, pelos y cualquier cosa que
pueda reducir el fiujo de aire.
• No la fuerce. Utilice la herramienta correcta para
su aplicaci6n. La herramienta correcta hara el
trabajo mejor y de modo mas seguro a la tasa para
la que ha sido dise_ado.
• No utilice el equipo mientras esta descalzo o
cuando Ileve sandalias o un calzado ligero similar.
Utilice calzado de protecci6n que proteja sus pies
y mejore su agarre en superficies resbaladizas.
• Mantenga el cabello, la ropa suelta, los dedos
y todas las partes del cuerpo alejados de las
aberturas y piezas moviles.
• Apague todos los controles antes de extraer la
bater[a.
• No utilice la podadora en entornos inflamables,
como puede ser en presencia de Ifquidos
inflamables, gases o polvo. La podadora crea
chispas que pueden inflamar el polvo o el humo.
• Mantenga el Area de trabajo limpia y bien
iluminada. Las zonas oscuras y poco despejadas
pueden provocar accidentes.
• Mantenga a los espectadores, niSos y visitantes
a una distancia de al menos 15 m al utilizar una
podadora con hilo. Las distracciones pueden
hacer que pierda el control de la herramienta.
3--Espa_ol
Mantengase alerta y atento a Io que esta haciendo
y utilice el sentido comt]n al utilizar la podadora.
No utilice la podadora cuando este cansado,
molesto, o bajo la influencia de drogas, alcohol
o medicamentos. En un momento de descuido,
mientras utiliza la podadora podrfan ocurrir lesiones
personales graves.
Guarde el aparato - Cuando no este en uso, la
podadora debe guardarse en un lugar seco, bajo
Ilave, fuera del alcance de los ni_os.
Vistase adecuadamente. No use ropa holgada o
joyas. Mantenga su cabello, ropa y guantes lejos
de las piezas moviles. La ropa suelta, joyas o el
cabello largo pueden quedar atrapados en las
piezas m6viles.
Asegure el cabello largo por encima del hombro
para evitar que se enrede en las piezas moviles.
Evite el arranque accidental.
Utilice un equipamiento seguro. Use siempre
proteccion ocular en conformidad con la norma
ANSI Z87.1.
• Deben utilizarse una mascara antipolvo, zapatos
de seguridad antideslizantes, o proteccion auditiva
para las condiciones apropiadas.
• No use ropa holgada o joyas. No Ileve el pelo
suelto. La ropa holgada, joyas o el cabello largo
podrian quedar enganchados en las salidas de aire.
• No utilice esta herramienta en una escalera, en
la azotea, en un arbol o sobre otros soportes
inestables. La superficie en la que se encuentra
debe ser Io suficientemente estable para que
permita el mejor control da la podadora en
situaciones inesperadas.
• No utilice la podadora si no funciona el interruptor de
encendido y apagado. La podadora que no puede
ser controlada con el interruptor de encendido es
peligroso y debe ser reparado.
• Estas medidas preventivas de seguridad reducen el
riesgo de arranque accidental de la podadora.

Compruebelaalineacionouni6ndelaspiezas
mOviles,siexisteroturadepiezasocualquierotro
problemaquepuedaafectaralfuncionamientode
lapodadora.SilapodadoraestadaSada,deberfa
repararseantesdeutilizarlo.Muchosaccidentes
soncausadosporpodadorasdemantenimiento
inadecuados.
•Mantenga la podadora seco, limpio y libre de
aceite y grasa. Utilice siempre un paso limpio para
limpiarlo. No utilice liquido de frenos, gasolina,
productos derivados del petrOleo o disolventes
fuertes para limpiar la podadora. Siguiendo esta
regla se reduce el riesgo de perdida de control y
deterioro de la carcasa de plAstico. Utilice siempre
gafas de seguridad con protecci6n lateral. Las
gafas de diario s61o tienen lentes resistentes al
impacto. NO son lentes de seguridad. Si sigue
estas indicaciones reducira el riesgo de da¢_os en
los ojos.
• Use siempre gafas de protecci6n con protecci6n
lateral que cumplan la normas ANSI Z87.1, junto
con protecci6n auditiva cuando utilice este equipo.
• Proteja sus pulmones. Utilice una careta o
mascarilla si se encuentra en una zona con
mucho polvo. Si sigue estas indicaciones reducirA
el riesgo de lesiones personales graves.
• Proteja su audicion. Use protectores auditivos
durante largos periodos de operacion. Si sigue
estas indicaciones reducirA el riesgo de lesiones
personales graves.
No exponga las podadoras con hilo a la Iluvia o a
la humedad.
Si entra agua en una podadora podrfa aumentar el
riesgo de descargas electricas.
Use pantalones largos y resistentes, mangas
largas, botas y guantes. Evite usar ropa holgada
o joyas que podrfan engancharse en las piezas
moviles de la mAquina o de su motor.
• No utilice el equipo mientras esta descalzo o
cuando Ileve sandalias o un calzado ligero similar.
Utilice calzado de protecci6n que proteja sus pies
y mejore su agarre en superficies resbaladizas.
• Mantengase firme y equilibrado. No realice
sobreesfuerzos. Una sobreextension puede
resultar en la perdida del equilibrio.
• Compruebe el Area de trabajo antes de cada uso.
Retire todos los objetos como rocas, cristales
rotos, clavos, cables o cuerdas que puedan salir
despedidos o quedar enganchados en la maquina.
• No dirija la podadora hacia personas o animales
domesticos.
Nunca utilice la unidad sin los accesorios
correctos. Cuando no este en uso, la podadora
debe guardarse en un lugar seco, bajo Ilave, fuera
de( aicance de los nii]os.
Las personas, nii]os y animales deberan estar a
15 metros del aparato como minimo.
Las operaciones de servicio de la podadora s61o
deben set realizadas por personal cualificado. El
servicio o mantenimiento realizado pot personal
no cualificado puede resultar en un riesgo de
lesi6n.
Guarde estas instrucciones. Consulte los
manuales con frecuencia y faciliteselos a otras
personas que puedan utilizar esta herramienta.
Si presta esta herramienta, facilite tambien estas
instrucciones.
4--Espa_ol

PROPUESTA 65 DE CALIFORNIA
,_, ADVERTENCIA: Este producto y el polvo creado al lijar, cortar, moler, perforar y otras actividades
de construccion contiene sustancias qufmicas, incluyendo plomo, que causan cancer, defectos de nacimiento
u otros da¢_os reproductivos. Lavese concienzudamente tras la manipulaciOn.
Algunos ejemplos de estos productos qufmicos son:
1. el plomo de las pinturas a base de plomo
2. la sflice cristalina de ladrillos y cemento y otros productos de alba¢filerfa, y
3. el arsenico y el cromo de la madera tratada qufmicamente.
El riesgo de exposiciOn a estos varfa en funciOn de la frecuencia con que realiza este tipo de trabajo. Para
reducir su exposiciOn a estas sustancias qufmicas, trabaje en un Area bien ventilada y con equipos de
seguridad aprobados, como mascarillas contra el polvo especialmente dise¢_adas para filtrar partfculas
microscOpicas.
PROLONGACIONES
Cuando utilice la herramienta de pintura a una distancia considerable de la fuente de alimentaciOn, utilice un cable
de extension suficientemente resistente para que transporte la corriente que utilizara el producto. Un cable no
adecuado puede causar una cafda en el voltaje de la Ifnea, provocando calentamiento o perdida de potencia. Utilice
el diagrama para determinar el tamaOo mfnimo de cable necesario con cada prolongacion. SOlo deberfa utilizar los
cables cubiertos circulares listados per Underwriters Laboratories (UL).
AI trabajar a laintemperie con un producto, utilice un cordon de extension fabricado para uso en el exterior. Este tipo
de cordon Ileva las letras "WA"/"W" en el forro. Antes de utilizar un cordon de extension, inspecciOnelo para ver si
tiene conductores flojos o expuestos y aislamiento cortado o gastado.
**Amperaje (aparece en la placa de datos de el producto)
0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0
Longueur du cordon Calibre de fiI(AWG)
25' 16 16 16 16 14 14
50' 16 16 16 14 14 12
100' 16 16 14 12 10 --
**Utilise sur circuit de calibre 12-20A NOTE: AWG=American Wire Gauge
_, ADVERTENCIA: Mantenga el cordon de extension fuera del Area de trabajo. AI trabajar con una
herramienta electrica, coloque el cordon de ta] manera que no pueda enredarse en la madera, herramientas
ni en otras obstrucciones. La inobservancia de esta advertencia puede causar lesiones serias. Inspeccione los
cordones de extension cada vez antes de usarlos. Si estan daOados reemplacelos de inmediato. Nunca utilice
la producto con un cordon daOado, ya que si toca la parte da¢_ada puede producirse una descarga electrica, y
las consecuentes lesiones serias.
GUARDE ESTAS INSTRUCCIONES
5--Espa_ol

Lassiguientespalabrasdese_alizaci6nysussignificadostienenelobjetodeexplicarlosnivelesderiesgorelacionados
conesteproducto.
S|MBOLO SE_,IAL SIGNIFICADO
Indica una situacion peligrosa inminente, la cual, si no se evita, causara la
PEMGRO: muerte o tesiones serias.
Indica unasituaci6n peligrosa posible, la cual, si no se evita, podr_acausar
ADVERTENCIA: la muerte o Iesionesserias.
PRECAUCION: Indica unasituaci6n peligrosa posible, }acuai, si no se evita, podria causar
lesionesmenores o leves.
(Sin el simbolo de alertade seguridad) Indica unasituaci6n que puede pro-
PRECAUCIION: ducir dafios materiales.
S iMBOLO NOMBRE DESIGNAClON/EXPLICAClON
V Voltios Voltaje
A Amperios Corriente
Hz Hertz Frecuencia (ciclos por segundo)
W Vatios Potencia electrica
M in Minutes Tiempo
,_, Corriente alterna Tipo de corriente
,,, Corriente directa Tipo o caracteristica de la corriente
[] Fabricacion Clase II Fabricacion con aislamiento doble
Velocidad sin Velocidad racional sin
carga carga
/min Por minuto Revoluciones, carreras, velocidad superficial,
orbitas, etc. por minuto
Alerta de condiciones No la exponga a la Iluvia ni la use en lugares
hQmedas hQmedos o mojados
Lea el manual del operador Para reducir el riesgo de lesiones el usuario
debe leer y comprender el manual del operador
antes de usar el producto
Proteccion para los ojos AI operar este equipo utilice proteccion para
los ojos.
Precauciones que involucran su seguridad.
@
O
&Alerta de seguridad
Abello largo
Ropa suelta
Mantenga alejados a
los espectadores
Si no se mantiene alejado el cabello largo de la
entrada de aire se podrian provocar lesiones
personales.
Si no se evita que la ropa suelta sea succionada
hacia la entrada de aire se podrian provocar
lesiones personales.
Mantenga a todos los espectadores a 15 m.
_50 pies) de distancia por Io menos.
6--EspaRol