Craftsman 989.795040 User manual

MODEL(s) Craftsman 989.795040 and 989.796060
No. 01
August 1998
SUBJECT Additions /Corrections to Illustrated Parts List within Operator's Manuals
1. Craftsman Operator's Manual, lYimmer/Bmshcutter Model 989.795040,
PN 211862.01, Page 18 and Craftsman Operator's Manual, Trimmer Model
989.795060, PN 211864.01, Page 13
Changes toPartNo. Listonpages13 and18,respectively:
WALBRO
ITEM CHANGEPN TOREAD CHANGEDESCRIPTION TOREAD
37 323601 325465 Cap,Um, High,Black Cap,Adj.High2 Stg,Wht
38 323602 325466 Cap,Lira,Low,White Cap,Adj.Low2 Stg,BIk
ZAMA
35 323603 111216 Cap,Lira,High,8lack
36 323604 111217 Cap,Lim,Low,White Cap,Adj. High2 Stg, Red Cap,Adj. Low 2Stg, Nat
2. Craftsman Operator's Manual, Trimmer/Brushcutter Model 989.795040,
PN 211862-01, Page 17 and Craftsman Operator's Manual, TrimmerModel
989.795060, PN 211864-01, Page 15
Changesto Part No. Ust-onpages :15and 17, L'espf_-'tdvely:.
ITEM CHANGEPN TO READ CHANGEDESCRIPTION TO READ
10 224236-61 224236 Cover,AirClnr,Lrg, Grey Cover,AirClnr,LrgBIk
17 325121 See Pfl18 Carburetorw/Choke CarburetorAsy
53 325157 300653 no change Kit,Piston,32qcAlum
54 no change 300482 Pin,C'ShaftPiston . Pin,C'ShaftPiston
55 no change 215876 Ring,Retaininig .Ring,Retaining
56 no change 224217 Ring,Piston .Ring,Piston
61 224235-61 224235 Cover,Cyl/Muff,Grey Cover,Cyl/Muff, Bik
=,t jiJ=Q I ji =
3. Craitsm;zn operator's eA_n_al, Trimmer/Bmshcutter Model 989.795040,
IITEM GtMHGE;PH •TO READ CHANGEDESCRIPTION TO READ
14 " _1..8075-Q! .. 218075 no change Flange,Spindle
22 362554-01 300737 no change . Kit,KnobAsy,Left
©McCulIochCorpomeon, 1998 • P.O. Box11990 • Tucson,AZ 85734-1990 • U.S.A.

4. Craftsman Operator's I_anual, Trimmer Model 989.796060,
PN 211864.01, Page 16
Changesto illustrationon page 16:
I ITEM CHANGEITEM TO READ REASON
9 9 - Item9, at the powerheadend ofthe shaftshouldberremoved
15 15 9 item15, at the"Guard,...WireFormed"shouldbe iteml9
19 - 19 Item19 =325456- Collar,WeedWrap"isan addeditem
,=
I11
2
Changes to S_ft_andl_Stdnghe.,ad Part No. List on page 16:
ITEM CHANGEPN TOREAD CHANGEDESCRIPTION TOREAD
7 no change 3.01024 Shaft,Flex48" DriveAsy,w/clip,48" '_
12 08031 0..8031-99 nochange Bolt,10-32x,?.
13 13039 13039-99 no change Nut,10-32 Hex
19 addedpart 325450 addedpart Collar,WeedWrap (Qty 1)i
=
*Item 19, Weed Wrap Collar, PN 325456, is a new service part with a suggested list price of $.92. This
Weed Wrap Collar was added to protect the shaft from binding due to debris build-up.
i i =l •
5. Craftsman Operator's Manual, Trimmer Model 989,796060,
PN 211864.01, Pages t4 and 15
Change to illustration on page 14: Change item 71 pointing at Starter/clutch Housing to read item 72.
Add to Powerhead Part No. List on page 15:
AD.IT_7_PARTNo.
SeeBelow ADDDESCRIPTION
Starter/ClutchHsg (Qty1) RF SON I
New Item No. 72, was inadvertently omitted
from odglnal parts !ist