Creative Play S114 User manual

pg 1 of 7
SINGLE SWING (CRADLE SEAT)
Installation Instructions
REF: S114 - SINGLE SWING (CRADLE SEAT)

pg 2 of 7 REF: S114 - SINGLE SWING (CRADLE SEAT)
PARTS required
x20 (FM80 ‘Brass screws’)x2 (COVERS)
x1 (SUPPORT BEAM)
S1
x4 (Uprights)
TOOLS required
x1 (CRADLE SEAT inc chain)
x8 (small caps blue) x4 (nut caps M8)

pg 3 of 7 REF: S114 - SINGLE SWING (CRADLE SEAT)
Foundation Details
550
150
Concrete
Timber support post
finished ground level
Soil
1680

pg 4 of 7 REF: S114 - SINGLE SWING (CRADLE SEAT)
Surfacing Details
= SYNTHETIC
= LOOSE FILL

pg 5 of 7 REF: S114 - SINGLE SWING (CRADLE SEAT)
Attach the TIMBERS S1 to the SUPPORT BEAM
Using 8x FM 80 ‘Brass Screws’ / 10x SMALL CAPS
Attach PLAYTEC COVER to the TIMBERS S1
Using 12x FM 80 ‘Brass Screws’
1
2
Installation Instructions
NOTES:
EACH SIDE
S1S1
EACH SIDE
:NOTES

pg 6 of 7 REF: S114 - SINGLE SWING (CRADLE SEAT)
Install the assembly
Follow Fundation details
Install CRADLE SEAT
Additional dimensions details
3
4
Installation Instructions
S1 S1
S1
S1

pg 7 of 7 REF: S114 - SINGLE SWING (CRADLE SEAT)
Additional Dimensions
Min 350mm - Max 635mm
Recomended 600mm