Creative Play BELLS - OCTAVIA OPTION User manual

BELLS - OCTAVIA OPTION
Installation Instructions
REF: MP108(A) - BELLS OCTAVIA OPTION
pg 1 of 5
BOARD ATTACHMENT FOR 4,5 & 6m Full & Half Octagonal Shelters
1 x board attachment shown above with MUSICAL PLAY BOARDS
Can be used for any MUSIC playboards in our range

pg 2 of 5 REF: MP108(A) - BELLS OCTAVIA OPTION
PARTS required
x2 (90mm x 90mm
UPRIGHT)
x1 (90mm x 90mm
CROSS BAR)
x42 (FM80 brass screws)
x4 (40mm brass screws)
BOARD ATTACHMENT REPLACES SIDE(S)
It can not be used in conjunction with standard sides or filled sides
x2 (angle cleats/brackets)
x1 PRE-ASSEMBLED BELLS
ON BAR INC BRACKETS.
x4 (Pairs of - 90mm x 90mm T’s)
T1
T2
x1 PRE-ASSEMBLED MUSIC
PLAY BOARD
TOOLS required

pg 3 of 5 REF: MP108(A) - BELLS OCTAVIA OPTION
Attach T2 timber (crossbar) using angle cleats/brackets and 40mm brass screws
1
6m HALF SHELTER shown
Crossbar will be inline with the
SIDES support (400mm)
T2
Installation Instructions

pg 4 of 5 REF: MP108(A) - BELLS OCTAVIA OPTION
Installation Instructions
Attach T1 timber (uprights) 90mm x 90mm T’s and 80mm brass screws
2
Installation Instructions
EXISTING SHELTER ROOF RAFTER
T1 T1
TO UPRIGHT
CENTRES 715mm

pg 5 of 5 REF: MP108(A) - BELLS OCTAVIA OPTION
Installation InstructionsInstallation Instructions
FIX THE ASSEMBLED MUSIC PLAY BOARD ON TO THE
TWO UPRIGHTS USING 6 X FM80 BRASS WOOD SCREWS
FIX MUSIC PLAYBOARD ONTO UPRIGHTS
Installation Instructions
3
FIX THE BAR ONTO THE TIMBER TO SUIT THE
HIOLE IN THE PLAYBOARD FRAME
USING 4 X FM80 BRASS WOOD SCREWS
BEFORE TIGHTENING THE BAR INTO PLACE
ENSURE THAT THE POSITIONING OF THE BAR
IS ACCURATE INBETWEEN THE TIMBERS -
YOU MAY NEED TO MOVE THE BAR LEFT OR
RIGHT A LITTLE
4FIX MUSIC PLAYBOARD ONTO UPRIGHTS