Creative Play ZIG ZAG BEAM User manual

ZIG ZAG BEAM
Installation Instructions
REF: CH112 - ZIG ZAG BEAM
pg 1 of 8

REF: CH112 - ZIG ZAG BEAMpg 2 of 8
Parts required
X2 (PRE-ASSEMBLED ‘BEAM’ LEFT/ RIGHT SECTION)
X1 (PRE-ASSEMBLED ‘BEAM’ CENTER SECTION)
x24 (FM80 ‘BRASS SCREW’)
x2 (M12 x 120 square cup hex bolt)
x2 (M12 NYLOC)
x2 (end caps)
ZZ2 QTY x 6
(90mm x 90mm)

REF: CH112 - ZIG ZAG BEAMpg 3 of 8
Foundation details 120º
GROUND LEVEL
CONCRETE
TIMBER SUPPORT POST
SOIL
NOTES:
DRAWING OF 1 BENCH – DO the same in EACH
TOP VIEW
FIG.1

REF: CH112 - ZIG ZAG BEAMpg 4 of 8
Foundation details 90º
GROUND LEVEL
CONCRETE
TIMBER SUPPORT POST
SOIL
NOTES:
DRAWING OF 1 BENCH – DO the same in EACH
TOP VIEW
FIG.2

REF: CH112 - ZIG ZAG BEAMpg 5 of 8
Surfacing details
= MINIMUM SPACE
= SURFACING AREA
NOTES:
Use this block to add additional note....
NOTES:
120º SURFACING
NOTES:
90º SURFACING

REF: CH112 - ZIG ZAG BEAMpg 6 of 8
Assembly instructions
1Attach the preassembled BEAM to the Timbers (ZZ2)
Using FM80 BRASS CREWS—ATTACH BEFORE LAYING CONCRETE FOUNDATIONS
NOTES:
Do THAT for ALL 3 BEAMS
2LAY CONCRETE FOUNDATIONS
ENSURE:
LAY CENTER BEAM BEFORE LEFT /RIGHT

REF: CH112 - ZIG ZAG BEAMpg 7 of 8
Assembly instructions
3Attach the LEFT/RIGHT BEAMS
Using M12 120 cup square hex bolts / NYLOCS / END CAPS

REF: CH112 - ZIG ZAG BEAMpg 8 of 8
Additional dimensions
NOTES:
120º SURFACING
NOTES:
90º SURFACING