SPORTSPOWER 4XMNJ User manual

1900mm
1810mm
2200mm
4XMNJ
DESCRIPTION:
TITAN DELUXE SINGLE SWING
APPROXIMATE ASSEMBLY TIME 2 PERSON ASSEMBLY REQUIRED ASSEMBLY SPACE
30
FLOOR AREA
2M x 2.5M x 2.5M
REQUIRED ASSEMBLY TOOLS
minutes
ASSEMBLED DIMENSIONS
ASSEMBLY
INSTRUCTION
WEIGHS16.1KG, BUILD IN LOCATION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]

1.Please check that all parts are present before
you start the assembly of your swing, as once
assembled, the swing is exempt from our home
approval policy.
2.For ease and speed of assembly, we
recommend that before you commence each
step of assembly, you should identify all the
parts required for that step.
TOP TIPS BEFORE YOU START
3.For larger items, please ensure that you have
sufficient space and people(as indicated on
page 1) to assemble your product safely.
4.During assembly, please take care not to
over-tighten any fittings, as this may damage
the product.
5.Please retain these instructions for future
reference.
UK WARNINGS
Read and follow all instructions.
The swing seat is suitable for ages 3-8.
Do not allow children under the age of 36
months nearby during assembly due to
small parts-choking hazard!
Maximum user weight of the swing seat is 50kg.
No more than one user allowed on the swing
seat.
The equipment is designed for outdoor
domestic use only and is not suitable for hiring
or commercial use.
Adult assembly required. Adult supervision is
required at all times while the swing is in use.
Never leave children unattended during play, or
use the equipment in any manner other than as
intended.
Never allow children to disembark from the
play equipment whilst it is still in motion.
Ensure that children are not facing the sun
whilst using the equipment.
Do not attach items to the equipment that are
not specially designed for use with this product,
including but not limited to cables, skipping
ropes and chains as they may cause
strangulation hazards.
Never allow children to walk too close to, in
front of, behind or in between the equipment
whilst in use. Always keep children a safe
distance from the product whilst in use.
Do not allow reckless playing, such as jumping
off, standing on seats or climbing ropes.
Do not allow children to use wet seats or during
rainy or windy conditions.
Instruct children to avoid swinging the empty
swing, twisting swing chains or ropes or
looping them over the top support bar since
this may reduce the strength of the chain or
rope.
Do not allow children to climb on the swing
frame (legs, top bar, cross bars and other
parts) these are structural components only
and not play features.
Instruct children to sit in the centre of the
swing, with their full weight in the middle of the
seats.
Ensure that children wear suitable clothing
whilst using this equipment. Never allow
children to wear loose clothing, neck ties,
scarves, clothing with drawstrings or loose
jewellery.
Please remove all packaging and packing
tags/wires before allowing children to use.
Please take note: As an extra precaution,
check this toy regularly for signs of wear or
damage.
TIPS: BEFORE STARTING ASSEMBLY,
PLEASE CHECK ALL PARTS ARE INCLUDED,
IF ANY PARTS ARE MISSING, PLEASE CALL
([phone]
PAGE 2 OF 13
4XMNJ
DESCRIPTION:
TITAN DELUXE SINGLE SWING
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]

At the start of assembling, do not tighten
bolt/nuts all the way, so as to allow some
possible adjustment, for ease of assembly.
TIGHTENING NUTS & BOLTS
After all major components are assembled, go
back over all bolts and nuts and properly
tighten all of them before using this product.
ANCHOR WARNING
The product should not be installed over
concrete, asphalt or any other hard surfaces.
The equipment should be placed on a level
surface at least 2 m from any structure or
obstruction such as a fence, garage, house,
overhanging branches, laundry lines or
electrical wires.
Do not use the equipment until it has been fully
assembled and anchored, and all the
components are secured. All the chains/ropes/
cables cannot be looped back on themselves.
The anchor must be placed level with or under
the ground in order to reduce tipping hazards.
Protective surfacing: One of the most important
things you can do to reduce the likelihood of
serious head injuries is to install
Shock-Absorbing Protective Surfacing (over
the ground) under and around your play
equipment. If you use loose -fill materials as a
surface, please follow these guidelines:
Maintain a minimum depth of 9 inches of
loose-fill materials such as wood mulch/chips,
engineered wood fibre, or shredded/ recycled
rubber mulch for equipment up to 8 feet high,
and 9 inches of sand or pea gravel for
equipment up to 5 feet high. NOTE: an initial fill
level of 12 inches will compress to about 9 inch
depth of surfacing over time. The surfacing will
also compact, displace and settle, and should
be periodically refilled to maintain at least a 9 -
inch depth. Carpeting and thin mats are
generally not adequate protective surfacing,
check and maintain the depth of the loose-fill
surfacing material to maintain the right amount
of loose-fill materials. Do not install loose fill
surfacing over hard surfaces such as concrete
or asphalt.
CARE AND MAINTENANCE INSTRUCTION
Please carry out checks and maintenance of
the main parts (crossbeams, suspensions,
anchors nuts and bolts) at regular intervals.
If these checks are not carried out the toy could
overturn or otherwise become a hazard.
It is of particular importance that they be
followed at the beginning of each season as
well as at regular intervals during the usage
season.
Check all nuts and bolts for tightness and
tighten when required.
Oil all metallic moving parts;
Check all coverings for bolts and sharp edges
and replace when required;
Check swing seats, chains, ropes and other
means of attachments for evidence of
deterioration. Replace when required in
accordance with the manufacturer's
instructions.
Remove plastic parts, such as swing seats or
similar parts or do not use when temperature
drops below 32 degree F(0 degree C).
PAGE 3 OF 13
4XMNJ
DESCRIPTION:
TITAN DELUXE SINGLE SWING
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]

Tighten all hardware.
Lubricate all metallic moving parts per
manufacturer's instructions.
Check all protective coverings on bolts, pipes,
edges, and corners, replace if they are loose,
cracked, or missing.
Check all moving parts including swing seats,
ropes, cables, and chains for wear, rust or
other deterioration. Replace as needed.
Reinstall any plasic parts, such as swing seats
or any other items that were removed for the
cold season.
Rake and check depth of loose fill protective
surfacing materials to prevent compaction and
to maintain appropriate depth. Replace as
necessary.
At the beginning of each play season:
Tighten all hardware.
Rake and check depth of loose fill protective
surfacing materials to prevent compaction and
to maintain appropriate depth. Replace as
neccessary.
Twice a month during play season:
At the end of each play season or when the
temperature drops below 32 degress F(0
DEGREES C).
Remove plastic swing seats and other items as
specified by the manufactured and take indoors
or do not use.
At the end of each play season:
Please disassemble with care when it is no
longer in operational condition.
Wear heavy duty working gloves!
Consumer may wish to recycle the steel tubing,
please take the frame to your local recycling
center.
Do not leave partially disassembled equipment
accessible by children.
All plastic parts could be recycled, take it to you
local recycling centre.
All rusted parts and bolts shall be properly
disposed of in houseware waste. Do not reuse.
Do not let children play with any disassembled
parts destined for disposal, such as chain,
tubings, bolts, nuts, screws!
Disposal Instructions
WARNING
PAGE 4 OF 13
4XMNJ
DESCRIPTION:
TITAN DELUXE SINGLE SWING
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]

3
7
7
7
7
3
3
3
2
2
2
2
1
6
4
5
5
5
5
4
(1)
(2)
(3)
(4)
(5)
(6)
(7)
NO.
1
4
4
2
4
1
4
QTY
TOP BAR
TOP LEG
LOWER LEG
CROSS BAR
PLASTIC CAP
SWING SEAT
ANCHOR
PART LIST
PAGE 5 OF 13
4XMNJ
DESCRIPTION:
TITAN DELUXE SINGLE SWING
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]
SW-ANCHOR2
SW-CAP
SW-XBARSW-XBAR
SW-LOWLEG
SW-TPLEG
SW-SEAT1
SW-TOPBAR-TITAN
SW-XBAR
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT

"U" BOLT
M8×102mm
X2
A
0cm
10cm
9cm
8cm
7cm
6cm
5cm
4cm
3cm
2cm
1cm
BOLT
M8×50mm
X4
B1
BOLT
M8×55mm
X4
B2
PAGE 6 OF 13
4XMNJ
DESCRIPTION:
TITAN DELUXE SINGLE SWING
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]
GEN-BOLTM8X50 GEN-BOLTM8X55
GEN-UBOLTM8X102
VIEW PRODUCT VIEW PRODUCT VIEW PRODUCT

0cm
10cm
9cm
8cm
7cm
6cm
5cm
4cm
3cm
2cm
1cm
ARC
WASHER
Ø19×8.5mm
X20
C
FLAT
WASHER
Ø19×8.5mm
X4
D
SPRING
WASHER
Ø13.5×8.5mm
X12
E
CAP
NUT
M8
X12
F
PAGE 7 OF 13
4XMNJ
DESCRIPTION:
TITAN DELUXE SINGLE SWING
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]
GEN-ARCWASH-19X8.5 GEN-CAPNUT-M8
GEN-FLATWASH-19X8.5 GEN-SPRWASH-M8
VIEW PRODUCT VIEW PRODUCT VIEW PRODUCT VIEW PRODUCT

0cm
10cm
9cm
8cm
7cm
6cm
5cm
4cm
3cm
2cm
1cm
SPANNER
13mm
X1
G
ALLEN KEY
6mm
X1
H
PAGE 8 OF 13
4XMNJ
DESCRIPTION:
TITAN DELUXE SINGLE SWING
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]
GEN-ALWR6MM
GEN-SPAN13
VIEW PRODUCT VIEW PRODUCT

B1 C EF
2
1
2
2
2
2
1
B1
x 4pcs
C
x 8pcs
E
x 4pcs
F
x 4pcs
Step 1
PAGE 9 OF 13
4XMNJ
DESCRIPTION:
TITAN DELUXE SINGLE SWING
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]

C
E
F
C
A
1
1
6
A
x 2pcs
C
x 8pcs
E
x 4pcs
F
x 4pcs
Step 2
PAGE 10 OF 13
4XMNJ
DESCRIPTION:
TITAN DELUXE SINGLE SWING
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]

4
4
3
2
2
2
2
33
3
B2 CE
D
F
3
2
4
5
D
x 4pcs
C
x 4pcs
E
x 4pcs
F
x 4pcs
B2
x 4pcs
Step 3
PAGE 11 OF 13
4XMNJ
DESCRIPTION:
TITAN DELUXE SINGLE SWING
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]

Step 4
30
cm Width
30 cm Depth
Concrete
Ground
minimum clearance between the
footrest and the ground.
IMPORTANT: The product must be anchored into the ground.
For optimum safety and performance, we recommend concreting
in the corners as shown in the diagram.
7
3
PAGE 12 OF 13
4XMNJ
DESCRIPTION:
TITAN DELUXE SINGLE SWING
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]

SEAT ADJUSTABLE GUIDE
THE LENGTH OF THE ROPE IS ADJUSTABLE FOR THE HEIGHT OF THE CHILD
THROUGH THE SEAT CONNECTOR.
TO ADJUST, LOOSEN THE KNOT ON THE SEAT CONNECTOR, PULL ROPE
THROUGH THE HOLES TO THE DESIRED LENGTH AND TIE A KNOT.
MAKE SURE THAT THE KNOTS ARE TIGHT AND THAT BOTH ROPES ARE
ADJUSTED SO THAT THE SEAT IS HORIZONTAL.
IMPORTANT: Minimum clearance between the footrest/seat and the ground should be 35cm.
SP-19-SW011H-SD-17001
PAGE 13 OF 13
4XMNJ
DESCRIPTION:
TITAN DELUXE SINGLE SWING
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone]