Creative Play ADVENTURE TRAIL 10 User manual

REF: AT10-U - ADVENTURE TRAIL 10 - U SHAPED
pg 1 of 22 23.05.22
AT10-U - ADVENTURE TRAIL 10
Installation Instructions
INSTRUCTIONS SHOWN ARE FOR THE STANDARD AT10 - BUT THE
GROUNDPLAN HAS BEEN REVISED TO CREATE THE U-SHAPE LAYOUT

REF: AT10-U - ADVENTURE TRAIL 10
pg 2 of 22 23.05.22
UPRIGHT TIMBERS
PARTS REQUIRED
U12
AT
U1
AT
U2
AT
U3
AT
U4
AT
U5
AT
U6
AT
U7
AT
U8
AT
U9
AT
U10
AT
U11
AT
U8
AT
U12
AT
U12
AT
*PLEASE NOTE ALL H TIMBERS ARE PRE-ASSEMBLED WITH PLAYTEC L’s AND/OR HEXBOARD (AS SHOWN ABOVE)
CODE SIZE QTY END ADDITIONAL
INFORMATION
AT - U1 1800 4 - UPRIGHT TIMBER
AT - U2 2715 1 END CAP UPRIGHT TIMBER
AT - U3 2715 1 END CAP UPRIGHT TIMBER
AT - U4 3000 1 - UPRIGHT TIMBER
AT - U5 3000 1 - UPRIGHT TIMBER
AT - U6 2335 1 END CAP UPRIGHT TIMBER
AT - U7 3000 3 - UPRIGHT TIMBER
AT - U8 1800 2 END CAP UPRIGHT TIMBER
AT - U9 2100 1 END CAP UPRIGHT TIMBER
AT - U10 2100 1 END CAP UPRIGHT TIMBER
AT - U11 1800 1 - UPRIGHT TIMBER
AT - U12 1800 3 - UPRIGHT TIMBER
AT -U7U 3000 1 UPRIGHT TIMBER - U SHAPE

REF: AT10-U - ADVENTURE TRAIL 10
pg 3 of 22 23.05.22
HORIZONTAL TIMBERS
*PLEASE NOTE ALL H TIMBERS ARE PRE-ASSEMBLED WITH PLAYTEC L’s AND/OR HEXBOARD (AS SHOWN ABOVE)
H1
AT
H2
AT
H3
AT
H4
AT
H5
AT
H7
AT
H6
AT
H8
AT
H11
AT
H9
AT
H10
AT
H12
AT
H9
AT
CODE SIZE QTY START END ADDITIONAL
INFORMATION
AT - H1 900 1 END CAP END CAP HORIZONTAL TIMBER
(HEXA GRIP SLAT)
AT - H2 2100 2 PLAYTEC L’S PLAYTEC L’S HORIZONTAL TIMBER
AT - H3 900 1 END CAP END CAP HORIZONTAL TIMBER
(HEXA GRIP SLAT)
AT - H4 2010 1 END CAP END CAP HORIZONTAL TIMBER
AT - H5 2100 1 PLAYTEC L’S PLAYTEC L’S HORIZONTAL TIMBER
AT - H6 2160 1 END CAP END CAP HORIZONTAL TIMBER
(HEXA GRIP SLAT)
AT - H7 2010 1 END CAP END CAP HORIZONTAL TIMBER
(HEXA GRIP SLAT)
AT - H8 900 2 END CAP END CAP HORIZONTAL TIMBER
(HEXA GRIP SLAT)
AT - H9 900 2 PLAYTEC L’S PLAYTEC L’S HORIZONTAL TIMBER
AT - H10 2100 1 END CAP END CAP HORIZONTAL TIMBER
AT - H11 2010 1 END CAP END CAP HORIZONTAL TIMBER
(HEXA GRIP SLAT)
AT - H12 2100 2 PLAYTEC L’S PLAYTEC L’S HORIZONTAL TIMBER
(HEXA GRIP SLAT)
PRE - ASSEMBLY

REF: AT10-U - ADVENTURE TRAIL 10
pg 4 of 22 23.05.22
x1
x1
TRAVERSE ROPE
ROPE BRIDGE
SWINGING ROPE CHAIN
CLIMBING PANELS (LOWER)
SWINGING ROPES
CLIMBING PANELS (UPPER)
x43 x47
656.M12 102003-01 - M12
x19
274.M12X200
x2 x2
x3 x1
PARTS REQUIRED

REF: AT10-U - ADVENTURE TRAIL 10
pg 5 of 22 23.05.22
PARTS REQUIRED
x6
CONSISTS OF
SHACKLE / BOLT / NYLOC / CAP
349.742.D-SHACKLE ‘SET’
274.M12X180
x3
x1x4x87
274.M12X220M12 SOCKET NUT (50MM)97.M8X80CSK
x1x2x2
740MM TYRE CHAIN625MM TYRE CHAIN (EYEBOLT)TYRE

REF: AT10-U - ADVENTURE TRAIL 10
pg 6 of 22 23.05.22
PARTS REQUIRED
x4
656.M10
x1
LOG WALK (PRE-ASSEMBLED)
ROPE TRAVERSE (PRE-ASSEMBLED)
x1

REF: AT10-U - ADVENTURE TRAIL 10
pg 7 of 22 23.05.22
FOUNDATION DETAILS
U2 U3 U4
U5
U6
U7U7
U7 U7U
U8 U8
U9
U10
U12 U11
U12 U12 U1U1U1
U1U1U1
FOUNDATION - 400MM X 400MM X 750MM (150MM SOIL APPROX)

REF: AT10-U - ADVENTURE TRAIL 10
pg 8 of 22 23.05.22
SURFACING DETAILS

REF: AT10-U - ADVENTURE TRAIL 10
pg 9 of 22 23.05.22
A) THE ORDER OF THE INSTALLATION INSTRUCTION HIGHLIGHT
WHERE THE MAIN CHANGE OF ‘SHAPE’
STEP (6) - THIS TIMBER IS TO BE POSITONED AS SHOWN - STRAIGH
NOT ANGLED
STEP (12) - TIMBER POSITIONED AS SHOWN ABOVE
(NOT ‘INLINE’ AT 90 DEGREES)
STEP (15) - H7 TIMBER POSITIONED AS SHOWN ABOVE
(NOT ‘INLINE’ AT 90 DEGREES)
6
12
15
INSTRUCTIONS SHOWN ARE FOR THE STANDARD AT10 - BUT THE
GROUNDPLAN HAS BEEN REVISED TO CREATE THE U-SHAPE LAYOUT

REF: AT10-U - ADVENTURE TRAIL 10
pg 10 of 22 23.05.22
INSTALLATION INSTRUCTIONS
1
2ATTACH TIMBER H1
POSITION THE UPRIGHT TIMBERS
USING 274.M12X200 / 656.M12 / 102003-01, SECURE HEXBOARD WITH M8X80MM WOOD SCREWS
FOLLOWING FOUNDATION DETAILS
H1
U12
AT
U1
AT
U2
AT
U3
AT
U4
AT
U5
AT
U6
AT
U7
AT
U8
AT
U9
AT
U10
AT
U11
AT
U8
AT
U12
AT
U12
AT

REF: AT10-U - ADVENTURE TRAIL 10
pg 11 of 22 23.05.22
INSTALLATION INSTRUCTIONS
3
4ATTACH TIMBER H3
ATTACH H2 TIMBERS USING PLAYTEC L’S
USING 274.M12X200 / 656.M12 / 102003-01
USING M8X80MM WOOD SCREWS, TAKE CARE THAT SCREWS DO NOT ‘CROSS’
H2
H2
H3
NOTES:
H3 HEXBOARD SLAT WILL NOT BE
ATTACHED UNTIL STEP 7

REF: AT10-U - ADVENTURE TRAIL 10
pg 12 of 22 23.05.22
INSTALLATION INSTRUCTIONS
5
6ATTACH TIMBER H4 AND LOWER PLAYTEC CLIMBING PANEL SHOWN
ATTACH ROPE BRIDGE
USING 274.M12X180 & 220 / 656.M12 / 102003-01 AND M8X80MM WOOD SCREWS
USING 656.M12 / 102003-01
H4
NOTES:
ATTACH PANEL ON OPPOSITE FACE TO
BEAM
ONE LOWER PLAYTEC PANEL HAS
HOLE DRILLED FOR BOLT (SEE CNC) 220 BOLT
180 BOLT
BOLT

REF: AT10-U - ADVENTURE TRAIL 10
pg 13 of 22 23.05.22
INSTALLATION INSTRUCTIONS
7
8ATTACH REMAINING 3 PLAYTEC CLIMBING PANELS
ATTACH H3 HEXBOARD SLAT
USING 8X80MM WOOD SCREWS
USING 8X80MM WOOD SCREWS TO COVER COUNTERSUNK BOLT
NOTES:
THIS PANEL IS ALREADY ATTACHED AS
PER STEP 6
NOTES:
ENSURE SECOND SET OF PANELS
ARE ON OPPOSITE FACE TO FIRST
H3

REF: AT10-U - ADVENTURE TRAIL 10
pg 14 of 22 23.05.22
INSTALLATION INSTRUCTIONS
9
10 ATTACH SWINGING ROPES TO TIMBER H5
ATTACH TIMBER H5 USING PLAYTEC L’S
USING 656.M12 / 102003-01
USING 8X80MM WOOD SCREWS
H5

REF: AT10-U - ADVENTURE TRAIL 10
pg 15 of 22 23.05.22
INSTALLATION INSTRUCTIONS
11
ATTACH TIMBER H6
ATTACH SWINGING ROPE CHAIN
USING 274.M12X200 / 656.M12 / 102003-01
USING M12 X 50MM SOCKET NUT, D - SHACKLE AND EYEBOLT SHOULD BE PRE-ATTACHED TO CHAIN
12
H6

REF: AT10-U - ADVENTURE TRAIL 10
pg 16 of 22 23.05.22
ATTACH TRAVERSE ROPE ABOVER TIMBER H6
INSTALLATION INSTRUCTIONS
13
14 ATTACH H8 TIMBERS
USING 274.M12X200 / 656.M12 / 102003-01
USING 656.M12 / 102003-01
H6
H6
H8
H8
NOTES:
H8 HEXBOARD SLATS WILL NOT BE
ATTACHED UNTIL STEP 21

REF: AT10-U - ADVENTURE TRAIL 10
pg 17 of 22 23.05.22
ATTACH TIMBER H7
INSTALLATION INSTRUCTIONS
15
16 ATTACH H9 TIMBERS USING PLAYTEC L’S
USING 8X80MM WOOD SCREWS
USING 274.M12X180 & 200 / 656.M12 / 102003-01
H8
H8
H7
H6
H9
H9

REF: AT10-U - ADVENTURE TRAIL 10
pg 18 of 22 23.05.22
ATTACH TIMBER H10
INSTALLATION INSTRUCTIONS
17
18 ATTACH TYRES
USING D - SHACKLE SETS AS SHOWN
USING 274.M12X230 / 656.M12 / 102003-01
H10
230 BOLT

REF: AT10-U - ADVENTURE TRAIL 10
pg 19 of 22 23.05.22
ATTACH TYRE CHAINS
INSTALLATION INSTRUCTIONS
19
20 ATTACH TIMBER H11 TO WEAVING POST UPRIGHTS
USING 274.M12X180 & 200 / 656.M12 / 102003-01
USING M12 X 50MM SOCKET NUT ON EYEBOLT CHAINS & D- SHACKLE SETS ON MIDDLE CHAINS
NOTES:
REPEAT EYEBOLT CHAIN ON
BOTH SIDES
ATTACH MIDDLE CHAINS TO
TYRES AS SHOWN
ENSURE CHAIN IS POSITION
ON INSIDE OF D - RING
REMOVE LINKS IF
NECESSARY
H11

REF: AT10-U - ADVENTURE TRAIL 10
pg 20 of 22 23.05.22
ATTACH H8 HEXBOARD SLATS
INSTALLATION INSTRUCTIONS
21 USING 8X80MM WOOD SCREWS
H8
H8
22 ATTACH ROPE TRAVERSE TO TIMBERS U10 & U11 AS SHOWN
USING 656.M10 / 102003-01
U11
U10