Creative Play BATPIPES User manual

BATPIPES
Installation Instructions
REF: MP106 - BATPIPES
pg 1 of 5

pg 2 of 5 REF: MP106 - BATPIPES
PARTS required
TOOLS required
x3FM80 BRASS WOOD
SCREWS
x1 PRE-ASSEMBLED MUSIC
PLAY BOARD
x1RECESSED PLAYTEC
CIRCLE
x1 PLAYTEC RING
x2 OBLONG PLAYTEC
PIECES
x1 PLAYTEC BLOCK
x1PLAYTEC BEATER HOLDER
x1 PADDLE BEATER WITH STEEL CORD

pg 3 of 5 REF: MP106 - BATPIPES
Foundation Details
TIMBER SUPPORT POST
CONCRETE
SOIL
FINISHED GROUND LEVEL
450 150
600

pg 4 of 5 REF: MP106 - BATPIPES
Installation Instructions
SANDWICH THE BEATER STEEL CORD
LOOP BETWEEN THE PLAYTEC RING
AND RECESSED PLAYTEC CIRCLE
FIX INTO PLACE USING 1 X FM80
BRASS WOOD SCREW
FIX BEATER TO LEFT TIMBER - BELOW MUSIC BOARD
USING 1 X FM80 BRASS WOOD SCREW
FIX BEATER HOLDER TO LEFT TIMBER - BELOW MUSIC BOARD
USING 2 X FM80 BRASS WOOD SCREWS
1
2
PUSH PLAYTEC BLOCK THROUGH THE HOLDER AND MATCH
UP THE TWO OBLONG PLAYTECS PIECES TO THE HOLES
FIX INTO TIMBER WITH 2 FM80 BRASS WOOD SCREWS.

pg 5 of 5 REF: MP106 - BATPIPES
Additional Dimensions
0.87M 0.26M
1.2M
1M
2.63M