Creative Play Pirate Ship Midi User manual

PIRATE SHIP
Installation Instructions
REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
pg 1 of 49

pg 2 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
Contents
PARTS required
FULL ROUND TIMBERS pg. 3
MAIN PANELS pg. 4-5
FLOOR SUPPORTS pg. 5
OTHER PARTS / ASSEMBLIES pg. 6-8
HEX BOARD pg. 8
FIXINGS REQUIRED pg. 9
TOOLS REQUIRED pg. 9
SURFACING &
FOUNDATION details
SURFACING DETAILS pg. 10-11
FOUNDATION DETAILS pg. 12-16
STEP by STEP instructions
Installation notes pg. 17
SECTION 1 - Main Assembly pg. 18-30
SECTION 2 - Additional Parts pg. 31-47
Triangular Sail Shade pg. 42-43
1.0m Slide pg. 47
Additional
Additional Drawings pg. 48-49
Notes pg. 49

pg 3 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
PARTS required FULL ROUND TIMBERS
A
J
F
G
H
H
DE
I
E
B
C
VOY118
VOY118
VOY118
VOY118
VOY118
VOY118
VOY118VOY118
VOY118
VOY118
VOY118
VOY118
VOY118a - QTY - 1 200mm dia @ 3100mm (chamfer 1 end)
(All below UK PINE)
VOY118b - QTY - 1 150mm dia @ 2618mm (1 hole / chamfer 1 end)
VOY118c - QTY - 1 150mm dia @ 4104mm (2 holes / chamfer 1 end)
VOY118d - QTY - 1 150mm dia @ 2618mm (1 hole / chamfer 1 end)
VOY118e - QTY - 2 150mm dia @ 2695mm (chamfer 1 end)
VOY118f - QTY - 1 150mm dia @ 3804mm (2 holes / chamfer 1 end)
VOY118g - QTY - 1 150mm dia @ 2618mm (chamfer 1 end)
VOY118h - QTY - 2 150mm dia @ 1750mm (1 holes / chamfer 1 end)
VOY118i - QTY - 1 150mm dia @ 3804mm (1 holes / chamfer 1 end)
VOY118j - QTY - 1 150mm dia @ 2580mm (2 holes / chamfer 1 end)

pg 4 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
PARTS required continued
1234
MPSMPSMPSMPS
MAIN PANELS - STARBOARD SIDE (right)
5 6 7 8
MPP MPP MPP MPP
MAIN PANELS - PORT SIDE (left)

pg 5 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
PARTS required continued
12
9
10
11
MPA
MPA
MPA
MPA
MAIN PANELS - ADDITIONAL (internal)
1
81113 12 910
234567
FSU
FSLFSLFSLFSL FSL
ASSEMBLYASSEMBLY
FSL
FSUFSUFSUFSUFSUFSU
FLOOR SUPPORTS

pg 6 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
PARTS required continued
Consists of...
2 x HANDRAILS
5 x Pre-assembled ‘STEPS’ inc ropes
1 x Attachment timber
2 x WBR2 ROPES 1
2
WBR
WBR
WB1
WB1
WB3
WOBBLY BRIDGE
NET CLIMBER CARGO NET
x1
(metal support / ground
anchour supplied
separately)
x1

pg 7 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
PARTS required continued
TRIANGULAR SAIL SHADE
1.0m SLIDE
TRIANGULAR SAIL SHADE FIXINGS
x3 (M12 Nylocs) x3 (BOW SHACKLE)
x3 (Covered end cap R60)
NOT STANDARD END CAP - has a
radius cut into it
x3 (M12x170mm EYEBOLT ) x3 (RIGGING SCREW)
INC. fixing ring on each corner
QTY - 16 (backs)
QTY - 16 (fronts)
CLIMBING BLOCKS
x1
(2 x metal ground
anchors / 1 x platform
support / fixings
included)

pg 8 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
PARTS required continued
1234
ARARARAR
AR - Additional Ropes (Nets)
HEX BOARD - ‘LOWER DECK’
HEX BOARD - ‘UPPER DECK’
710
811
9
1
2
3456
STERN TRIM PIECE

pg 9 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
PARTS required continued
x50 (‘NYLOCS’ M12 - Nylon locking nuts
- 46 required)
x2 (M12 x 210* CUP SQUARE BOLTS)
*or closest size available NOT SMALLER
x9 (Covered end cap R60)
NOT STANDARD END CAP - has a
radius cut into it
x320 (FM80 WOOD SCREWS - 304 required)
x40 (FM180 WOOD SCREWS)
x22 (End Caps)
x20 (Polyfix halves - 15
required) INC POLYFIX HALF
SCREWS
x40 (7.5x60 MULTIFIX
SCREW - 34 required)
x80 (7.5x40 MULTIFIX
SCREW - 72 required)
x28 (6x80 RAPID DRIVE
SCREW)
fixings for NET HOLDERS
TOOLS required

pg 10 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
SURFACING Details OVERALL AREA
= MINIMUM SPACE
= SURFACE AREA
NOTES:
The slide ‘OUTLINE’ has been included to help highlight the orientation of the area

pg 11 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
SURFACING Details OVERALL AREA - DATUM LINE
CREATE A DATUM LINE
Using the 1 x 150mm & 1 X 200mm‘MAIN UPRIGHT’ posts AJ
DATUM LINE
VOY118 VOY118
A
J
VOY118
VOY118

pg 12 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
FOUNDATION Details
Notes:
1) DATUM LINE and DATUM POSTS
Foundation measurements will be taken from the DATUM LINE and DATUM POSTS - this is labelled as DL
2) GROUND LEVEL
All measurements for DEPTHS and HEIGHTS are taken from FINISHED GROUND LEVEL - this is labelled as FGL
3) SLIDE OUTLINES
The slide ‘OUTLINE’ has been included to help highlight the orientation of the area
4) DIRECTION OF HOLES
Ensure the PRE DRILLED HOLES are positioned as shown - Dashed lines show holes going in the opposite direction
AJ
DATUM LINE
VOY118 VOY118
A
J
VOY118
VOY118

pg 13 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
FOUNDATION Details
DL
FGL
SIDE VIEW
ABC
G IF
F
J
J G I
D
DE C B A
E
E
VOY118VOY118VOY118
VOY118 VOY118VOY118
VOY118VOY118 VOY118 VOY118 VOY118
VOY118
VOY118VOY118
VOY118
FULL ROUND POSTS

pg 14 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
FOUNDATION Details
FGL
SIDE VIEW
DL
H
H H
H
VOY118
VOY118 VOY118
VOY118
WOBBLY BRIDGE POSTS

pg 15 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
FOUNDATION Details
FGL
SIDE VIEW
DL
NET CLIMBER
NOTES:
The NET GROUND ANCHOUR needs to sit
5-10mm below FINISHED GROUND LEVEL

pg 16 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
FOUNDATION Details
SIDE VIEW
DL
1.0M SLIDE
FGL
NOTES:
The bottom section of the SLIDE will need to be
installed INTO THE GROUND
HOLE = 600mm x 600mm x 600mm
(ensure concrete is laid 150mm below finished
ground level)

pg 17 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
Installation Notes
- ATTACHING PRE-ASSEMBLED PANELS to ROUND TIMBERS
1) The pre-assembled panels have a 45mm x 45mm support attached either side - screw through the support into the ROUND TIMBER (FIG. 1)
2) Ensure the 45mm x 45mm support is postioned in the CENTRE of the ROUND TIMBER (FIG. 2a / 2b / 2c)
- ATTACHING ANGLED TIMBERS
3) Take extra care when attaching the angled timbers - it is essential that these timbers are installed correctly to ensure that PRE-ASSEMBLED
PANELS ‘meet’ where intended
- HEXBOARD FLOORS
4) The floors for the main deck / bow / stern are NOT drilled - When attaching the HEX BOARD to the floor support timbers COUNTERSINK and ensure
they are kept uniform (where possible)
- GENERAL
5) The majority of the instructions are orientated showing the looking toward the BOW from the STERN STARBOARD SIDE
NOTE: It is not necessary to
screw into the round timber
‘EVERY BOARD WIDTH’
leave out alternant boards
e.g . 1st / 3rd / 5th
1st
2nd
3rd
FIG. 1
FIG. 2a
FIG. 2b FIG. 2c

pg 18 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
Installation Instructions
Instructions will be split between MAIN ASSEMBLY and
ADDITIONAL PARTS
SECTION 1 - MAIN ASSEMBLY
Attach the internal main panels to main posts
Attach MAIN PANELS to MAIN POSTS - using 16 FM80 SCREWS
1MPA10
MPA10
MPA11
MPA11
J
J
D
D
F
F
A
FGL
FACING TOWARDS BOW
NOTES:
All measurements for DEPTHS and HEIGHTS
are taken from FGL
FLOOR HEIGHTS
FLOOR HEIGHTS - 982mm measurement from
GROUND LEVEL is essential as the 18mm
HEX board floors will sit on top of the 90x90
support timber - MUST SIT @ a finished height
of 1000mm
D F
J

pg 19 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
Installation Instructions
Attach the internal main panels to main posts
Attach MAIN PANELS to MAIN POSTS - using 6 FM80 SCREWS
2MPA9
MPA9
C
C
G
G
A
FGL
FACING TOWARDS BOW
NOTES:
All measurements for DEPTHS and HEIGHTS
are taken from FGL
FLOOR HEIGHTS
FLOOR HEIGHTS - 429mm measurement from
GROUND LEVEL is essential as the 18mm
HEX board floors will sit on top of the 90x90
support timber - MUST SIT @ a finished height
of 447mm
G
C

pg 20 of 49 REF: VOY118 - PIRATE SHIP MIDI (TIMBER)
Attach the MAIN PANELS to main posts
Attach MAIN PANELS to MAIN POSTS - using 16 FM80 SCREWS
Installation Instructions
3MPP7 MPS3
MPS3
MPP7
F CD G
C
D
G
F
MPP7