Cres Cor H137WSRR-C Series Manual

OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSRR-C Series Companion Holding Cabinet
FL-2330
Rev. 0 (2/07)
5925 Heisley Road • Mentor, OH 44060-1833
Models: H137WSRRC2020 SERIES for use with Convotherm C2020 Roll-In Rack (not included).
Cabinet model number:
Cabinet serial number:
Authorized Service Agency:
Ph: Fax:
Keep this manual for future reference.
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSRR-C Series Companion Holding Cabinet
FL-2330
Rev. 0 (2/07)
5925 Heisley Road • Mentor, OH 44060-1833

FL-2330
Rev. 0 (2/07)
5925 Heisley Road • Mentor, OH 44060-1833
TABLE OF CONTENTS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BYAUTHORIZED SERVICE
PERSONNEL ONLY
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN
WARNING
SUBJECT PAGE
INSTALLATION INSTRUCTIONS .......................................................................................... 2
Illustration (Leg Adjustment), Figure 1............................................................................2
Illustration (Drain Valve), Figure 2..................................................................................2
OPERATING INSTRUCTIONS ................................................................................................ 3
Illustration (Control Panel), Figure 3............................................................................... 3
MAINTENANCE INSTRUCTIONS
How to Clean the Unit......................................................................................................4
Trouble Shooting Guide...................................................................................................5
Replacement Parts (Cabinet)............................................................................................6
Illustration (Cabinet Parts) ............................................................................................... 7
Replacement Parts (Power Unit)......................................................................................8
Wiring Diagram................................................................................................................9
How to Reverse the Door Opening .................................................................................. 10
SERVICE POLICY and AGENCY LIST ..........................................................................FL-1400

5925 Heisley Road • Mentor, OH 44060-1833
Companion
Holding Cabinet FL-2330
Rev. 0 (2/07) Page 1 of 10
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSRR-C Series Companion Holding Cabinet
IDENTIFYING YOUR CABINET:
Look for this label on the back of your cabinet. This information is needed when calling for questions or service.
ELECTRICAL SPECIFICATIONS:
Model No. Volts Watts Amps Hertz Phase NEMA
H137WSRRC2020C 120 1920 16.0 60 1 5-20P
H137WSRRC2020C208 208 2000 10.0 60 1 6-15P
H137WSRRC2020C240 240 2000 8.6 60 1 6-15P
Note: The above model numbers are basic models. They may be followed by letters: L, M, 2M, D, or ending with S.

5925 Heisley Road • Mentor, OH 44060-1833
Companion
Holding Cabinet FL-2330
Rev. 0 (2/07) Page 2 of 10
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSRR-C Series Companion Holding Cabinet
HOW TO INSTALL UNIT:
Remove all paper and packing material from inside of1. cabinet.
Remove protective paper and vinyl material from2. outside surfaces of cabinet.
Place the cabinet in a well-ventilated area.3. Place cabinet on level floor. (For cabinets with legs,4. adjust the legs of the cabinet to ensure proper fit of rack
into cabinet. See Fig. 1)
Plug cord end into proper wall outlet.5. Fill water pan with 4 gallons (15 liters) of water.6.
Make sure green drain valve is closed. See Figure 2.
7. Push POWER switch to “ON.” Yellow POWER
LIGHT will come on.
8. Push the “SET” button on the TEMPERATURE
CONTROL. The TEMPERATURE DISPLAY will
show “SP1” (set point 1).
9. Press “SET” again and the current set point temperature
will be displayed.
10. Press the  ADJUST buttons to adjust to 200°F
(93°C).
11. Run the unit for one hour.
NOTE: DO NOT PUT FOOD IN CABINET!
This step is to burn off manufacturing oils and excess
adhesive.
Air is VERY HOT when door is opened.
12. Let the cabinet cool and wipe inside clean with
detergent and hot water before first use.
Use of treated or
soft water may be
required for proper
operation and to maintain warranty.
WARNING
Figure 1 Leg Adjustment
Figure 2 Drain Valve

5925 Heisley Road • Mentor, OH 44060-1833
Companion
Holding Cabinet FL-2330
Rev. 0 (2/07) Page 3 of 10
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSRR-C Series Companion Holding Cabinet
HOW TO HOLD:
No water is needed in pan.1. Push POWER switch to “ON.” Yellow POWER2. LIGHT will come on.
Push the “SET” button on the TEMPERATURE3. CONTROL. The TEMPERATURE DISPLAY will
show “SP1” (set point 1).
Press “SET” again and the current set point temperature4. will be displayed.
Press the5.  ADJUST buttons to adjust to the
desired temperature.
Press “SET” to save the temperature setting.6. Preheat cabinet for 45 minutes.7. Put product into cabinet.8.
HOLD WITH HUMIDITY:
Fill water pan with HOT water.1. Push POWER switch to “ON.” Yellow POWER Light2. will come on.
Push the “SET” button on the TEMPERATURE3. CONTROL. The TEMPERATURE DISPLAY will
show “SP1” (set point 1).
Press “SET” again and the current set point temperature4. will be displayed.
Press the5.  ADJUST buttons to adjust to the desired
temperature.
Press “SET” to save the temperature setting.6. Turn the “HUMIDITY” thermostat to No. 9.7. Preheat for 45 minutes.8. Turn “AIR” thermostat to desired temperature. (See9. thermostat settings below.
10. Put product into cabinet
Air is VERY HOT when door is opened.
NOTES: Proper food holding temperature is 140°F/60°C or higher.
SOME TYPICAL THERMOSTAT SETTINGS:
Thermostat Setting Result Thermostat Setting Result
Air Humidity Cab. Temp. Humidity Air Humidity Cab. Temp Humidity
150° F Off 150° F N/A 160°F Med 160°F 50%
175°F Off 175° F N/A 160°F High 160°F 95%
200°F Off 200° F N/A 170°F Low 170°F 15%
170°F Med 170°F 35%
100°F 3½ 100°F 98% 170°F High 170°F 85%
170°F Max 170°F 90%
150°F Low 115° F 98% 200°F Low 200°F 7%
150°F Med 150° F 95% 200°F Med 200°F 15%
150°F High 150° F 95% 200°F High 200°F 40%
160°F Low 160° F 30%
Note: These settings are based on laboratory conditions and may differ from conditions at point of use. Experiment with
the settings to determine what is best for your application.
WARNING
Figure 3
Yellow
Light “On-Off”
Switch
“Air”
Thermostat Thermometer “Humidity”
Thermostat
R
OFF
POWER
ON
( 0 )
( I )
AIR
7
9
1
2
10
4
3
6
HUMIDITY
PROOF HOLD
HIGH
LOW
8
MEDIUM
HOLD
5
10
DRY
1
2
3
LOW
4
5
6
MOIST
HIGH
9
8
7
MEDIUM
20
40
190
200
210
0
C
F
100
60
80
20
120
140
220
R
180
105
95
100
90
70
60
160
80

5925 Heisley Road • Mentor, OH 44060-1833
Companion
Holding Cabinet FL-2330
Rev. 0 (2/07) Page 4 of 10
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSRR-C Series Companion Holding Cabinet
MAINTENANCE: WATER PAN
Drain, wipe and fill water pan daily. (Clear vinyl drain
hose is provided.)
Push hose onto drain nozzle under the base.1. Turn knob to open the drain.2.
MAINTENANCE: CABINET
Wipe the inside of cabinet after daily use.1. Leave doors slightly open to fully dry interior.2.
BEFORE cleaning the cabinet: Unplug cord
from wall.
Do NOT hose cabinet with water.
Do NOT get water on controls.
Do NOT use abrasives or harsh chemicals.
Cleaning hints:
Wipe up spills as soon as possible.1. Clean cabinet regularly to avoid heavy dirt build-up.2. Make a test spot with cleaner.3. Follow manufacturer’s directions on cleaner.4. Do not mix cleaners.5. Avoid drips and splashes6.
HOW TO CLEAN THE UNIT:
Soil Cleaner Method
CABINET
Inside and
Outside
(Stainless Steel)
ROUTINE CLEANING Soap, Ammonia, or mild
*detergent and water.
1. Sponge on with cloth.
2. Rinse with water.
3. Wipe dry.
STUBBORN SPOTS AND
STAINS Mild abrasive made for stainless steel. 1. Apply with damp sponge or cloth. 2. Rub lightly.
BURNT-ON FOODS OR
GREASE Chemical oven cleaner for stainless steel. Follow oven cleaner manufacturer’s directions.
HARD WATER SPOTS
and SCALE Vinegar 1. Swab or wipe with cloth. 2. Rinse and dry.
*Mild detergents include soaps and non-abrasive cleaners.
Delime or descale
water pan parts as
required, to prevent
damaging build-up.
WARRANTY COVERAGE MAY BE AFFECTED
WITHOUT PROPER CLEANING.
WARNING

5925 Heisley Road • Mentor, OH 44060-1833
Companion
Holding Cabinet FL-2330
Rev. 0 (2/07) Page 5 of 10
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSRR-C Series Companion Holding Cabinet
TROUBLE-SHOOTING CHART:
FAILURE POSSIBLE CAUSE
1. Yellow light at switch
does NOT light.
1a. Switch is “OFF”.
1b. Cord unplugged from wall outlet.
1c. Circuit breaker/fuse to wall outlet blown.
2. Unit does not heat. 2a. Temperature Control set too low.
2b. Switch is “OFF”.
3. No humidity in cabinet. 3a. Humidity Thermostat set too low.
3b. No water in water pan.
4. Unit gets too hot or
won’t shut off. 4a. Defective electrical parts. UNPLUG UNIT FROM WALL OUTLET.
5. Blower does not work
or makes noise. 5a. Defective blower.
6. GFCI device trips.
6a. The insulation inside the heating elements may have absorbed some
moisture. This may have occurred if the cabinet has not been used for a
long period of time or during shipping and storage of the cabinet. Drain
the water pan if needed. Plug the cabinet into a non-GFCI outlet and set
the Temperature Control to 200° (93°C). Let the cabinet run for about 1
hour to dry out the heating elements from any moisture may have been
absorbed. If the circuit breaker trips, turn off cabinet, remove cord from
power source, and call the Factory Authorized Service Agent. After drying
the heating elements, plug cabinet into the GFCI receptacle; the cabinet
should run properly. If the GFCI trips, call the factory Authorized service
agent.
GFCI (ground-fault circuit interrupter): A GFCI receptacle is a device that de-energizes a circuit when it
detects an unsafe flow of current to ground. The intention of a GFCI device is to minimize the potential for an
electrical shock
If cause is none of the above, refer to our list of Authorized Service Agencies.

5925 Heisley Road • Mentor, OH 44060-1833
Companion
Holding Cabinet FL-2330
Rev. 0 (2/07) Page 6 of 10
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSRR-C Series Companion Holding Cabinet
CABINET REPLACEMENT PARTS:
ITEM DESCRIPTION 120V 208V 240V
1 Heater Kit,Air, 1000 Watts each 0811-074 0811-074-02 0811-074-01
2 High Limit 0848-060 0848-060 0848-060
3 Power Cord 0810-065-10 0810-039-02 0810-039-02
4 Heater Kit, Water, 2000 Watts 0811-271 0811-271 0811-271
5 Drain Valve 0898-015 0898-015 0898-015
6 Thermostat Probe Kit (probe only) 0848-008-3-ACK 0848-008-3-ACK 0848-008-3-ACK
7 Power Unit (See Page 8) 0675-069 0675-070 0675-070
8 Door - full, solid 1221-557-K
-full, w/window 1221-558-K
-half, solid, top LH, bottom, RH 1221-560-K
-half, solid, bottom LH, top, RH 1221-559-K
-half, window, top LH, bottom, RH 1221-561-K
-half, window, bottom LH, top, RH 1221-562-K
9 Gasket Kit, Body 0861-175
10 Gasket Kit, Door 0861-265
11 Hinge Kit 0519-074-K
12 Latch Kit 1006-122-01-K
13 Tunnel 0546-141
14 Cover, Water Pan 0761-020
15 Handle, Drain Valve 0911-095
16 Leg, Adjustable 1206-070
Handle, Pull (Black) 0911-102

5925 Heisley Road • Mentor, OH 44060-1833
Companion
Holding Cabinet FL-2330
Rev. 0 (2/07) Page 7 of 10
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSRR-C Series Companion Holding Cabinet
CABINET REPLACEMENT PARTS:
1
2
3
7
8
9
10
11
12
13
14
15
16
2
1
17
4
5
6

5925 Heisley Road • Mentor, OH 44060-1833
Companion
Holding Cabinet FL-2330
Rev. 0 (2/07) Page 8 of 10
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H137WSRR-C Series Companion Holding Cabinet
REPLACEMENT PARTS:
ITEM DESCRIPTION 120V 208V 240V
Power Unit 0675-069 0675-070 0675-070
17 Power Light 0766-094 0766-095 0766-095
18 Power Switch 0808-116 0808-116 0808-116
19 Thermostats, (with probe) 0848-008-ACK 0848-008-ACK 0848-008-ACK
20 Knob 0595-061 0595-061 0595-061
21 Terminal Block 0852-093 0852-093 0852-093
22 Relay 0857-130 0857-102 0857-102
23 Blower Kit 0769-180-01-SSK 0769-182-01-SSK 0769-182-01-SSK
24 Vent Fan 0769-165 0769-174 0769-174
25 Thermometer (Analog)
Thermometer (Digital) 5238-030-K 5238-034-K 5238-030-K 5238-034-K 5238-030-K 5238-034-K
26 Transformer (used with digital thermometer) 0769-159 0769-159 0769-159
REPLACEMENT PARTS FOR THE POWER UNIT:
20
19
18
17
21
22
23
24
25
26
20
19