Crestron Cresnet C2N-ANLZ User manual

Crestron C2N-ANLZ
Cresnet®Analyzer
Operations Guide

This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2006 Crestron Electronics, Inc.

Crestron C2N-ANLZ Cresnet®Analyzer
Contents
Cresnet®Analyzer: C2N-ANLZ 1
Introduction ...............................................................................................................................1
Features and Functions................................................................................................1
Applications.................................................................................................................1
Specifications ..............................................................................................................2
Physical Description....................................................................................................3
Industry Compliance ...................................................................................................6
Setup ..........................................................................................................................................7
Network Wiring........................................................................................................... 7
Hardware Hookup ....................................................................................................... 7
Memory Card .............................................................................................................. 8
Battery .........................................................................................................................8
Uploading and Upgrading.......................................................................................................... 9
Establishing Communication.......................................................................................9
Firmware .....................................................................................................................9
Operation .................................................................................................................................10
Button Operation .......................................................................................................10
Console Operation..................................................................................................... 11
Network Analyzer ..................................................................................................... 12
Problem Solving ......................................................................................................................13
Troubleshooting......................................................................................................... 13
Check Network Wiring..............................................................................................13
Further Inquiries ........................................................................................................14
Future Updates .......................................................................................................... 14
Return and Warranty Policies ..................................................................................................15
Merchandise Returns / Repair Service ...................................................................... 15
CRESTRON Limited Warranty.................................................................................15
Operations Guide – DOC. 6473 Contents •i

Crestron C2N-ANLZ Cresnet®Analyzer
Cresnet®Analyzer: C2N-ANLZ
Introduction
Features and Functions
• Cresnet®Analyzer records Cresnet data at customer installations for
analysis by Crestron engineers
• Logs Cresnet traffic and assesses the Cresnet network
• Dual power – Cresnet Power (24 VDC) or included 9 Volt battery
backup
• Logs analyzed data to included 512MB (expandable to 1GB)
multimedia memory card (MMC); USB 2.0 MMC-compatible card
reader included
• Push-button operation for simple logging of data
Applications
The C2N-ANLZ is used to diagnose and record Cresnet problems at customer
installations. The C2N-ANLZ is capable of performing the following functions:
• Record Cresnet traffic data to included memory card
• Log under-voltage events (i.e. power failure, wiring faults, etc.)
• Provide Network Analyzer functionality for 2-Series control systems that do
not natively support it (i.e. QM-RMCRX and QM-RMCRX-BA)
Operations Guide – DOC. 6473 Cresnet®Analyzer: C2N-ANLZ •1

Cresnet®Analyzer Crestron C2N-ANLZ
Specifications
Specifications for the C2N-ANLZ are listed in the following table.
C2N-ANLZ Specifications
SPECIFICATION DETAILS
Power Requirements
Cresnet Power Usage
Battery Backup (included)
<1 Watt @ 24 Volts DC
9 Volt disposable Alkaline, 625 mAh;
Approximately 10 hours of full operation in
lieu of Cresnet power, 6 months on standby
Memory Card (included)
Size
Format
512MB Multimedia Memory Card;
Upgradeable to 1GB
FAT16, Microsoft®Windows®compatible
Data Logging Via software or hardware command; logs
power interruptions and system startup
when powered by battery backup
Environmental
Temperature
Humidity
41° to 104°F (5° to 40°C)
10% to 90% RH (non-condensing)
Enclosure Black metal, surface mount box
Dimensions
Height
Width
Depth
1.25 in (3.18 cm)
3.80 in (9.65 cm)
3.13 in (7.94 cm)
Weight 9.6 oz (272 grams)
2 •Cresnet®Analyzer: C2N-ANLZ Operations Guide – DOC. 6473

Crestron C2N-ANLZ Cresnet®Analyzer
Physical Description
This section provides information on the connections, controls, and indicators
available on your C2N-ANLZ.
C2N-ANLZ Physical View
Operations Guide – DOC. 6473 Cresnet®Analyzer: C2N-ANLZ •3

Cresnet®Analyzer Crestron C2N-ANLZ
C2N-ANLZ Overall Dimensions
3 4 51 2
6
7 8
3.80 in
(9.65 cm)
1.25 in
(3.18 cm)
3.13 in
(7.94 cm)
Connectors, Controls, & Indicators
# CONNECTORS,
CONTROLS, &
INDICATORS
DESCRIPTION
1 PWR Light Emitting
Diode (LED)
Indicates the state of operation of the
C2N-ANLZ. Refer to “Operational Status” on
page 10 for more information.
2 NET LED Indicates Cresnet activity on the Cresnet
bus.
3 MARKER 1 & 2
BUTTONS
Marker buttons are used to leave a marker in
the recorded log file that can note a specific
occurrence on a Cresnet network (i.e. an
unexpected event). Refer to “Mark Events in
the Log” on page 11 for more information.
(continued on following page)
4 •Cresnet®Analyzer: C2N-ANLZ Operations Guide – DOC. 6473

Crestron C2N-ANLZ Cresnet®Analyzer
Connectors, Controls, & Indicators (continued)
# CONNECTORS,
CONTROLS, &
INDICATORS
DESCRIPTION
4 LOG BUTTON
The LOG button starts and stops data
logging to the memory card. Refer to “Log
Data to a Memory Card” on page 10 for more
information.
5 INIT BUTTON
The INIT button initializes and formats the
memory card. Refer to “Format a Memory
Card” on page 10 for more information.
6 MEMORY
Memory card slot for included removable
multimedia memory card. The memory card
can be inserted or removed when the
C2N-ANLZ is not logging data (LOG LED is
off).
7 NET PORTS
(2) Four-pin terminal block NET ports
connect the C2N-ANLZ between the control
system and the Cresnet network.
8 COMPUTER
1
5
96
One DB9, female, bidirectional computer
console port for connection to a PC. Use with
included straight serial cable.
Pin 1: N/A
Pin 2: Receive Data (RD)
Pin 3: Transmit Data (TD)
Pin 4: Data Terminal Ready (DTR)
Pin 5: Signal Ground (G)
Pin 6: N/A
Pin 7: N/A
Pin 8: Clear To Send (CTS)
Pin 9: N/A
Operations Guide – DOC. 6473 Cresnet®Analyzer: C2N-ANLZ •5

Cresnet®Analyzer Crestron C2N-ANLZ
Industry Compliance
As of the date of manufacture, the C2N-ANLZ has been tested and found to comply
with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling.
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
6 •Cresnet®Analyzer: C2N-ANLZ Operations Guide – DOC. 6473