CROSSRC AT6(KIT) User manual

AT6(KIT)

1.5 2.0 2.5 4.0 5.5 7.0
Electronic equipment
THREAD
LOCK
CAUTION
1
GLUE
PAINT
(Not included)
TOOLS
(Not included)
ABS
CEMENT
To prevent serious personal injury and/or property damage,operate all remotely
controlled models in a responsible manner as outlined herein.
Safety Precautions
1.1 This radio-controlled model is not a toy, it is designed for persons 14 years of age or older.
1.2 Do not operate your vehicle on unsafe terrain; always pay attention to your surroundings.
1.3 Never operate your vehicle on public roadways, around moving people, animals, or operating machinery.
1.4 Keep clear of power lines and high-powered radio equipment to minimize radio frequency interference.
1.5 Since this vehicle contains small components, it may be a choking hazard for small children. Keep the vehicle and
any spare parts out of reach of small children.
Inspect your radio-controlled model before operation
2.1 Ensure that all screws are properly tightened. Use thread-lock to secure any metal to metalcontacts- especiallyforcomponentsdesigned
to withstand torque (servo mounts, motor mount, driveshaftgrubscrews etc.).
2.2 Always check the battery voltage for both the transmitter and vehicle prior to operatingyourvehicle.Keepthebatteries freshinthe
transmitter and always begin your vehicle runs witha fullychargedbatterypack.
2.3 Always check that the motor and servo are operating smoothly and in the right directionprior tooperation.If binding between
components is observed, replace parts as necessary to reduce possibilityofcomponentorservodamage.
2.4 To turn on your vehicle, always power on your transmitter first,thenpoweronyourreceiver.
After operating your radio-controlled model
3.1 To turn off the vehicle, always power off your receiver priortopoweringoffyourtransmitter.
3.2 Use caution when handling the vehicle- components, especially the ESC andmotorwhichwill behotafteroperation.
3.3 Never use battery packs which are dented or otherwise damaged. Ensure that the wireinsulation isintactandthatconnectors are
properly soldered. Lithium batteries can becomefirehazardsif mishandled.

SHOCK
OIL
BAG(B)
71226
2
BAG(A)
GREASE
91006 91007
2.0x 5.5x0.4
200501 42312 42313 17007 17008
6.5x 2.5x 27x 5x 1
41198
200401 41195 13004
41196 41418 41197
42324
M4
12204
41802
30307
11125
M2.5x10 M2.5
12105
208103
71227
41381
White mark
71289
50047
208101 208102
AT6(KIT)
AT6(KIT)
44208

BAG(C)
3
5x 10x4
15012
215205 215206 41556
11125
M2.5x10
BAG(D)
5x8x0.3
72007
215202 215203 215201 215204
33801
4.2x 8x0.4
14201 15012
M3x4
11401
15014
13001
3x 7.2x0.5
5.1x 8x1.5
42203
5x8x0.5
72003
11207
M3x10
215101 33901 33902 33903
41549 41373 41550 41554 41307
42201 42202 71229 74015
M4
12304
3x 7x0.5
14102
42232
AT6(KIT)
AT6(KIT)
11215 M3x28

44092
BAG(E)
33905(11T) 33906(18T) 33907(13T) 33904(34T) 42214
215309
215307 215308 41558 33908 41398 42209
215301
215302
15015
15x 21x4
15013
10x 15x4
15012
5x 10x4
13002
3.8x 9.2x0.6
42208
72007
5x 8x0.3
41209
4
42223
42215 42216 42217 42218 42219
42220 42221 42222
34701(14T) 34702(17T)
215501215502
215503
215504215505 215506 215507
M3
12203
AT6(KIT)
12x 18x4
15016
41259
15017
6x 12x4
15x 18x0.2
75020
M3x3
11412
M2.5x10
11316
11217
M2.5x10
11211
M3x18
11119
M2.5x16
11125
M2.5x10
11218
M2.5x4
11133
M2x12
11227
M2.5x8
11136
M2.5x18
11205
M3x6

BAG(F)
BAG(G)
BAG(I)
94071
94072
94053
94054
11413
M4x12
BAG(H)
41336
5
41164
41646 41644
41640
41641 41642
41643
41645
95064 95065
94069
94070
41691 41692
95090 95089
223904
223903
2239
2239x2
223901 223902223903
41693 42233
41688
1.3x 1 x20

94061
BAG(J)
214303
BAG(K)
BAG(L)
215007
215006215001 215009
215008
215004 215002 215003
BAG(M)
71182
73045 73046
6
225910225910
225904225912225913225905
215005 215014
215014
215106
215102
215104 215105

BAG(N)
BAG(O)
214705
214703
214708
214709
214707
7
225803
225804

BAG(P)
8
BAG(Q)
214905
214904 214903 214906
214902 214901
214907
65201
207614
207617
207616
207618

207719
207714
207714
207714
207714
207720
207721 207722
207717 207718
207716
207715
207713
207712
205111
205111
207802 207803 207803
207803 207803 207801
BAG(R)
9
205111
205111
BAG(S)
Right
Left87128
Left
Right 87127
87129
87130
87131
87132 87133
BAG(T)

91004
42310
BAG(U)
BAG(V)
10
225801
225802
BAG(W)
225909
225903 225907 225908 225914 225906
225902
214903 214904 225901
226001 85247
BAG(X)

BAG(Y)
226102
226101
226106
226106
226103226104 226103
226105
BAG(Z)
BAG(AA)
226201
226209
226203
226202
226210
226211
226212
226208
226205
226204
226206
226207
44207 23911
11

BAG(CC)
42224
3x10 .8
225701
91152
4x 3
15012
5x 10x4
BAG(BB)
44172 94056
91175
11227
M2.5x8 M2
12206
M3x4
11401
41819
42231
91176
V4.0
M3x10
11306
M3x8
11303
11207
M3x10
M3
M3x18
12203
11211
11206
M3x8
11210 M3x16
11215 M3x28
M3x25
11233 M3x50
M3x14
11209
M3x20
11212
11413
M4x12
M3x12
11208
3x 7x0.5
14102
M2x6
11102
M1.6x6
11704
ST2.6x12
11873
11202 M2x6
M2x8
11103
M2x4
11101
11142
M2.5x6
ST2.6x10
11872
11214
12

1
22
41549
15012
33801 71229
215101
74015
71229
14201 12304
12304
14201
11401
11207
215202
215204
4.2x 8x0.4
14201
M4
12304
15012
M3x4
11401
11215 M3x28
11207
M3x10
THREAD
LOCK
13
Limited slip adjust
(1) Tighten to the right.
(2) "0.5"or"0.75" turns to the left.
2S Li-Po:0.75 3S Li-Po:0.5
Recommended motor
Brushed motor 30T-35T
Brushless motor 1400kv
Fast
Slow
10T 11T 12T 13T 14T 15T 16T 17T 18T
30.2
Motor gear Final reduction ratio
59.7
27.5 25.2 23.2 21.6 20.1 18.9 17.8 16.8
54.3 49.8 45.9 42.6 39.8 37.3 35.1 33.2
AT6(KIT)
11207
11215
14102
14102
3x 7x0.5
14102
41373
AT6(KIT)
BAG(D)

3
41550
42201
42202
41554
41307
33901
33902
15014
15014
15014
15014
13001
13001
11207
11207
11207
215203
42203
42203
15012
15012
15012
42203
15012
Tips:
Tighten the screws with one sheetof
paper inserted between both gears.
15014
13001
3x 7.8x0.5
15012
11207
M3x10
5.1x 8x1.5
42203 72003
5x8x0.5
72003
4
33903
14
42203 42203
Note Direction
GREASE
GREASE
GREASE
GREASE
72003
72003
11207
215201
AT6(KIT)
BAG(D)

11125 215205
72007 215206
41556
15012
72007
15012
GREASE
42232
5
Electronics
speed control
Black
Red
White
ON/OFF
Switch
Battery
(Not included)
s+ -
TH ST
BIND
BT-R2
MADE IN CHIAN
ONOFF
Tips:
Test the gear mesh by connecting the ESC to the motor/gearbox
assembly. If the gearbox is not operating smoothly or is creating excess
noise, check the gear mesh prior to proceeding to the next step.
11125
M2.5x10
15012
5x8x0.3
72007
6
BAG(C)
15
AT6(KIT)
AT6(KIT)

7
M3x8
11303
11207
M3x10
42224
3x10.8
42224
214907
11207
11207
214906
11303
M3x8
11303
8
16
11303
214905
AT6(KIT)
AT6(KIT)
BAG(CC)

44173
M3x10
11306
215005
215001
215008
215014
214901
71226
214903
11207
11207
M3x10
11207
11207
9
17
11207
71289
44208
M3
M3x18
12203
11211
11206
M3x8
11206
11211
11207
12203
225909
215106
215104
11306
11306
THREAD
LOCK
214903
AT6(KIT)
BAG(CC)

44176
215014
71227
214904
215003
214902
71289
11207
11207 44208
91152
11206
11207
11211 11206
12203
215105
11207
11207
11306
11306
11207 12203
11206
91152
214904
10
THREAD
LOCK
M3x10
11306
M3x10
11207
M3
M3x18
12203
11211
11206
M3x8
18
AT6(KIT)
BAG(CC)

11
214708
214709
214705
11206
12203
12203
11206
11206
12203 214703
11206
11206
11206
M3
12203
11206
M3x8
19
AT6(KIT)
BAG(CC)