Crown Mark B3050-1 User manual

ASSEMBLY
INSTRUCTIONS
COMPLETED DRESSER ASSEMBLY
MADE IN MALAYSIA
NOTE : MUST TIGHTEN SCREWS PERIODICALLY. WITH USE SCREWS MAY BECOME LOOSE.
CHECK TIGHNESS OF ALL SCREWS EVERY 6-8 WEEKS.
CLEANING INSTRUCTION
After assembled, clean & polish the completed parts if necessary with soft cloth and industrial recognized furniture polish
ITEM NO : B3050-1
DRESSER
THE HARDWARE IS LOCATED IN THE PACKING ITEMS
THE ANTI TIPPING HARDWARE IS LOCATED IN THE RIGHT SIDE FRONT DRAWER OF DRESSER
Wall
G
AFFIX TO WALL
BEHIND DRESSER
F
Level Me on
Uneven Floor
ITEM DRAWING DESCRIPTION QTY
1
2ALLEN KEY
(M4) 1
HARDWARE LIST
BOX OF DRESSER
ITEM DRAWING DESCRIPTION QTY
DRESSER
A 1
LEFT FRONT LEG
(Packed inside drawer)
B 1
JCBC BOLT
WITH SPRING
WASHER AND
FLAT WASHER
(M6 x 40mm)
8
B
C
D
E
C
D
E
RIGHT FRONT LEG
(Packed inside drawer)
LEFT BACK LEG
(Packed inside drawer)
RIGHT BACK LEG
(Packed inside drawer)
1
1
1
GTIPPING
RESTRAINT
(Affix to wall
behind dresser)
*Located in the
Right Side
Front Drawer
1
F 1
SUPPORT LEG
C
C
1
2
STEP 1
STEP 2
PART INSIDE
LEGS (PACKED
INSIDE DRAWER)

ASSEMBLY
INSTRUCTIONS
ITEM DRAWING DESCRIPTION QTY
MIRROR
A 1
MIRROR
SUPPORT RAIL
B 2
COMPLETED MIRROR ASSEMBLY
MADE IN MALAYSIA
ITEM DRAWING DESCRIPTION QTY
JCBC BOLT
WITH SPRING
WASHER AND
FLAT WASHER
(M6 x 35mm)
1 8
28
ALLEN KEY
(M4)
THE HARDWARE IS LOCATED IN THE PACKING ITEMS
NOTE : MUST TIGHTEN SCREWS PERIODICALLY. WITH USE SCREWS MAY BECOME LOOSE.
CHECK TIGHNESS OF ALL SCREWS EVERY 6-8 WEEKS.
CLEANING INSTRUCTION
After assembled, clean & polish the completed parts if necessary with soft cloth and industrial recognized furniture polish
HARDWARE LIST
ITEM NO : B3050-11
MIRROR
BOX OF MIRROR
BOX OF MIRROR
A
B
2
STEP 1
Arrow facing
up side
ITEM DRAWING DESCRIPTION QTY
DRESSER
A 1
BOX OF DRESSER
1