Crown Mark Tacoma B8280-1 User manual

ASSEMBLY
INSTRUCTIONS
BOX OF DRESSER
ITEM DRAWING DESCRIPTION QTY
ADRESSER 1
COMPLETED DRESSER
ASSEMBLY
THE ANTI TIPPING HARDWARE IS LOCATED IN THE RIGHT SIDE DRAWER FRONT OF DRESSER
NOTE : MUST TIGHTEN SCREWS PERIODICALLY. WITH USE SCREW MAY BECOME LOOSE.
CHECK TIGHNESS OF ALL SCREW EVERY 6-8 WEEKS.
CLEANING INSTRUCTION
After assembly, clean & polish the completed parts if necessary with soft cloth and industrial recognized furniture polish MADE IN MALAYSIA
PAGE 1 OF 1
ITEM NO : B8270 / B8280 - 1 DRESSER
B
C
SUPPORT LEG
1
2
HARDWARE LIST
ITEM DRAWING DESCRIPTION
1
2
1
4
ALLEN WRENCH
(M4)
CONNECTION BOLT
(M6 x 60mm)
W/WASHER &
SPRING WASHER
F
1
STEP 1
STEP 2
A
F
REMARK : 4 PCS LEG & SUPPORT LEG
INSIDE THE BOX WHICH IS LOCATED
ON THE BOTTOM PACKING PALLET.
THE HARDWARE IS LOCATED IN THE PACKING ITEMS
(Packed underneath
bottom panel)
3Assembly Tool
Not Included 1
1
1
D
E
FRONT LEG
(WITH "F/L" LABEL)
FRONT LEG
(WITH "F/R" LABEL)
BACK LEG
(WITH "B/L" LABEL)
BACK LEG
(WITH "B/R" LABEL)
1
1
B
C
D
E
"F/R" LABEL
"B/R" LABEL
"F/L" LABEL
"B/L" LABEL

ANTI-TIPPING KIT
PAGE 1 OF 1
4 L BRACKET
PARTS IDENTIFICATION
HARDWARE IDENTIFICATION
1
A
3
2
SHORT SCREW
DRESSER
CABLE TIE
LONG SCREW
2 PCS
1 PC
1 PC
1 PC
1 PC
ITEM :B8270 / B8280 - 1 DRESSER
STEP 2
Locate the other bracket on the wall over a wall stud and
two inches below the mounting bracket secured to the back of
dresser. Attached to the wall stud using the long screw
provided, through the smaller hole.
STEP 3
Place the dresser into position so both mounting brackets are vertically in line. Lace the end of the restraint strap
through the large hole in each mounting bracket. Bring both ends together and slide the flat end through the
locking end and draw it through until all slack is removed. Confirm that the strap is securely laced and locked.
STEP 1
Attach a bracket securely to the back top rail of
the dresser using short screw provided, through
the smaller hole.
This tip restraint must be attached to a wall
stud using long screw enclosed.
WALL
A
1
4
A
4
2
A
4
4
3