Crown Mark Jaymes B6580-Q-HB User manual

ASSEMBLY INSTRUCTIONS
CROWN MARK (CRWN)
MODEL:B6580-Q-HB / B6580-K-HB
NOTE:MUST TIGHTEN SCREW PERIODICALLY.WITH USE SCREWS WILL
BECOME LOOSE CHECK THIGHT OF ALL SREWS EVERY 6-8 WEEKS.
CLEANING INSTRUCTION
After assembled,clean & polish the complete parts if necessary with soft clotch ang industrial recognized furniture polish. MADE IN MALAYSIA
Thank you for purchasing this quality product.Be sure to check all packing material carefully for small parts which
may have come loose inside the carton during shipment.Identify and count all parts and compare with hardware
list as below: STEP 1
COMPLETED
ASSEMBLY
Step 1 :Attach and tighten the Leg
Post (L/R) (B) to the Head Board
(A).Insert JCBC (M8) With Washer
(C&D) to affix.
BACK VIEW
C
C
C
C
4x
CD
4x
CD
B
B
A
R
L
ITEM DRAWING DESCRIPTION QTY
1A HEAD
BOARD
(BOX 1) BOX OF HEADBOARD
HB LEG
POST (L/R) 2B
ITEM DRAWING DESCRIPTION DIMENSION
8 x P1.0 x 35MM
CJCBC (M8)
WITH WASHER
D
QTY
4
1
ALLEN KEY M5 5 x 120MM
(BOX 1) BOX OF HEADBOARD (HARDWARE LIST)

ASSEMBLY INSTRUCTIONS
CROWN MARK (CRWN)
MODEL:B6580-Q-HB, B6580-Q-FBD,B6580-KQ-RAIL
NOTE:MUST TIGHTEN SCREW PERIODICALLY.WITH USE SCREWS WILL
BECOME LOOSE CHECK THIGHT OF ALL SREWS EVERY 6-8 WEEKS.
CLEANING INSTRUCTION
After assembled,clean & polish the complete parts if necessary with soft clotch ang industrial recognized furniture polish. MADE IN MALAYSIA
Thank you for purchasing this quality product.Be sure to check all packing material carefully for small parts which
may have come loose inside the carton during shipment.Identify and count all parts and compare with hardware
list as below: STEP 1
Screw Driver is not included
STEP 2
12
3
I
FH
5
F
G4
STEP 3
STEP 4
Affix the Side Rail (L&R)
(H) to the Wooden Slat (F)
using the CSK screw (I) and
a screwdriver.
Affix the Bottom Rail
Support (G) to Wooden Slat
(F) as Shown.
Important !!
LEVEL THE SIDE RAIL BY
COVERING WITH A SOFT CLOTH
AND TAPPING WITH A HAMMER.
Press laterally
into the groove
and drop down.
J
E
Affix the Wooden Slat (F) to
the Wooden Panel (E) using
the CSK screw (J) and a
screwdriver.
COMPLETED
ASSEMBLY
F
H
G
G
F
F
A
H
E
B
H
E
E
E
E
A
B
A
B
BC
K
L
B
D
D
Affix the Leg Support (D) to Foot
Board (B) as shown. Loosen or tighten
Leg Support (D) as necessary to level
the bed.
D
C
C
B
Attach and tighten the FB leg (C)
to the Foot Board (B), insert
JCBC (M6) With Washer (K) as
shown.
ITEM DRAWING DESCRIPTION QTY
1A HEAD
BOARD
(BOX 1) BOX OF HEAD BOARD
ITEM DRAWING DESCRIPTION DIMENSION
4 X 32MM
IC.S.K SCREW
(M4)
J
QTY
6
15
C.S.K SCREW
(M3.5) 3.5 x 20MM
(BOX 2) BOX OF FOOT BOARD (HARDWARE LIST)
ITEM DRAWING DESCRIPTION QTY
1B FOOT
BOARD
(BOX 2) BOX OF FOOT BOARD
C
D
FB
LEG 2
2
LEG SUPPORT FOR
FB
ITEM DRAWING DESCRIPTION QTY
2
HSIDE RAIL
(L&R)
(BOX 3) BOX OF SIDE RAILS
E 5
WOODEN PANEL
F 3
WOODEN SLAT
G 3
SLATS SUPPORT
8 x P1.0 x 35MM
KJCBC (M8)
WITH WASHER
L
2
1
ALLEN KEY M5 4 x 120MM