Crown CTs 1200 Parts list manual

AC Power Draw and Thermal Dissipation:
Pink noise 12dB crest factor, bandwidth limited 22Hz to 22kHz.
Typical line impedance used.
Measurements made with 120VAC mains. Line current figures for 230VAC units derived by multiplying 120VAC figures by 0.5.
Data based on all channels driven.
watts in watts out dissapated Btu/hr kcal/hr
At Idle 60 0 60 205 52
1/8th Power Pink Noise 8 Ohms/Ch. 600x2
Typical of program material 16 Ohms Bridge 1200
just at clip. 4 Ohms/Ch. 600x2
8 Ohms Bridge 1200
2 Ohms/Ch. 250x2
4 Ohms Bridge 500
70V/Ch. 600x2
140V Bridge 1200
1/3rd Power Pink Noise 8 Ohms/Ch. 600x2
Typical of program material 16 Ohms Bridge 1200
with severe clipping. 4 Ohms/Ch. 600x2
8 Ohms Bridge 1200
2 Ohms/Ch. 250x2
4 Ohms Bridge 500
70V/Ch. 600x2
140/200V Bridge 1200
CTs 1200
Load Rated
Power
Line Current
120VAC
Line Current
230VAC
Watts Thermal Dissipation
7.6 3.8 641 157 484 1651 416
10.0 5.0 872 151 720 2458 620
8.8 4.4 1330 405 925 3158 796
7.6 3.8 641 157 484 1651 416
11.5 5.7 996 403 593 2025 511
15.5 7.8 1372 405 967 3300 832
903
996 403 593 2025 511
1217 168 1050 358213.4 6.7
11.5 5.7