croydon GR1T User manual

CROYDON
ELECTRICAL GRIDDLE WITH PRESS - MODEL GR1T-200001 A0
-PLEASE read these instructions carefully before operating this appliance.
-The temperature is thermostatically controlled between the range of 50ºC to 300ºC (122ºF to
572ºF). A signal lamp adjacent to the thermostat indicates when heating element is
energized.
-This unit is designed to operate on alternative current (A.C.) only.
-DO NOT CONNECT TO DIRECT CURRENT (D.C.)
-Care should be taken when operating this appliance as HOT SURFACES may cause burns.
-Ensure that the power supply cord does not come into contact with hot surfaces.
-Do not leave unit in operation without an attendant.
-When not in use for long period unplug the appliance.
INSTALLATION AND OPERATION
-Check if voltage of your power system corresponds to the same specified on the appliance
label.
-
-After 30 minutes heating, turn temperature controls down to operating desired temperature
and grease plate, generously with butter or oil. Never allow excess of fat or oil to buildup
as this will result in build-up of carbon on the plates, which should be removed with a
scraper.
-Appliance is provided with grease drawer that receives grease and food scraped residues.
-This appliance should be preheated before daily operation. Always allow 15 minutes
preheat time before loading griddle with food to give griddle surface time to saturate.
-To turn off your appliance turn thermostat knobs completely towards left.
CLEANING PROCEDURE
-Always ensure that the appliance is disconnected from the main power supply before
cleaning.
-Try to scrape as much grease and residues from cooking surface as possible while the
unit is still hot.
-After appliance has cooled, clean cooking surface and body using only a damp cloth.
Never use water jet or immerse appliance in water.
-Wipe off appliance with a dry cloth and wait at least half an hour before re-connecting to
main power outlet.
IMPORTANT
Before using the appliance for the first time, remove the protection coating (MEDICINAL
VASELINE) with a damp cloth and turn the control knobs to 300ºC (572ºF), allow griddle to
heat for +/- 30 minutes. You will notice some smoke appearing due to the protection
coating and internal insulation burning, which is normal.
- It is possible to turn off the press heater by operating the on-off switch at the front panel.
INSTRUCTION MANUAL
CROYDON CROYDONMAQ INDUSTRIAL LTDA.
Estrada São Lourenço, 891 - Capivari - Duque de Caxias.
RJ - Brasil - CEP 25243-150 Fax: [phone]
Phone: [phone]
e-mail: [email protected]
GR1T-200001 A0
GR1T
GR1T

25
CROYDON
CROYDON
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Screw (4.8)
Cooking Plate
Thermostat Bulb Retainer
Heating Element (3000W)
Special Screw
Heating Element Support
Nut
Thermal Insulation
Heating Element Protection
Gabinet
Cord Connection
Wiring Connection
Cord Retainer
Screw (3.5)
Thermostat
Nut (3/16")
Screw (3/16")
Foot
Knob
Pilot Light
Screw (thermostat)
Grease Drawer
Bottom Cover Plate
Rubber Finishing
Retainer Adapter
Plate
Shaft
Arm
3/16” Nut
Shaft
Handle
3/16” Screw
Lid
Spring Suport
3/16” Washer
Heating Fixer
Heating Element (900W)
Upper Heating Plate
Shaft
Protective Conduit
1/4” Nut
Spring Regulator
Spring
Arm Support
Press Heater On-Off Switch
3/16” Washer Press
3/16” Screw
Nut Regulator
Screw Regulator
Rubber Protector
557
18.404-3
2.065-3
18.455-3
330
18.452-3
635
18.454-3
18.450-3
18.432-3
2.115-3
2.066-3
232
552
2.009-3
604
385
1.918-3
2.009-B
3.509-3
329
3.506-3
18.464-3
2.007-3
2.805-3
1.343-3
15.024-3
2.638-3
623
2.118-3
2.114-3
481
2.648-3
2654-3
643
2.036-3
2.035-3
2.649-3
2.646-3
2.604-3
621
2.631-3
2.044-3
2.639-3
37041-3
594
355
2.196-3
2.109-3
2.113-3
4
6
7
8
10
22
16
15
17
12
13
11
18
23
20
21
14
9
7
5
1
2
3
ELECTRICAL GRIDDLE (GR1T) ELECTRICAL GRIDDLE (GR1T)
Item Code Description
24
Voltage (V)
Power (W)
Amperage (A)
Weight (kg/lbs)
Dimensions W x H x D (cm/in)
Technical Data
220
6900
31.4
73/160.6
101/39.8 x 36/14.2 x 56/22.1
GR1T-200001 A0
19
26
8
36
17
39
26
38
40
28
50
29
33 32
37
41
41
27
27
49
48
44
16
46
35
47
43
42
48
47
34
31
45
Wiring diagram
G
L2
L1
30