croydon SASEG-100001-B2 User manual

SASEG-100001-B2
(STAINLESS STEEL ARM)
SANDWICH GRILL - MODEL: SASEG-100001-B2
ATTENTION:
-PLEASE read these instructions carefully before operating this appliance.
-The temperature is thermostatically controlled between the range of 50ºC to 300ºC (122º F
to 572ºF). A signal lamp adjacent to the thermostat indicates when the heating elements are
energized.
IMPORTANT:
- These units are designed to operate on alternating current (A.C.) only.
- DO NOT CONNECT TO DIRECT CURRENT (D.C.).
- Care should be taken when operating this appliance as HOT SURFACES may cause
burns.
-Ensure that the power supply cord does not come into contact with hot surfaces.
-Do not leave unit in operation without an attendant.
-When not in use for long period unplug the appliance.
INSTALLATION AND OPERATION:
-Check if voltage of your power system corresponds to the same specified on the machine
label.
-Before using the appliance for the first time, turn the control knob to 300ºC (572ºF), close
the lid and allow the appliance to heat for + / - 30 minutes. You will notice smoke appearing
due to the internal insulation burning, which is normal.
-After 30 minutes heating, turn temperature control down to operating desired temperature,
keep knob in this position until pilot light turns off, at this point the unit will be ready to be
used.
-To turn off the unit turn knob completely towards left.
CLEANING PROCEDURE
-Always ensure that the appliance is disconnected from the main power supply before
cleaning.
-After appliance has cooled clean cooking surface and body using only a damp cloth. Never
use water jet or immerse appliance in water.
-Wipe off appliance with a dry cloth and wait at least half an hour before re-connecting to
main power outlet.
INSTRUCTION MANUAL
CROYDON
CROYDON
CROYDONMAQ INDUSTRIAL LTDA.
Estrada São Lourenço, 891 - Capivari - Duque de Caxias.
RJ - Brasil - CEP 25243-150 Fax: [phone]
Phone: [phone]
e-mail: [email protected]

Code DescriptionItem
23
31
24
30
25
29
26
22
21
48
47
28
27
10
12
11
15
2
14
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
46
2.113-3
621
15.024-3
2.638-3
623
2.118-3
2.114-3
481
2.648-3
3.503-3
385
2.036-3
2.034-3
2.649-3
2.646-3
2.604-3
2.007-3
2.096-3
9.413-3
2.085-3
2.631-3
2.044-3
2.639-3
604
594
355
2.196-3
2.109-3
643
552
2.651-3
1.917-3
2.641-3
3.509-3
557
2.009-B
329
2.131-3
2.650-3
2.009-3
2.657-3
2.091-3
2.658-3
2.645-3
2.659-3
2.655-3
642
601
330
2.654-3
1.343-3
18
16 17
19
20
38
34
35 36
Rubber Protector
1/4” Nut
Shaft
Arm
3/16” Nut
Shaft
Handle
3/16” Screw
Lid
Insulation
3/16” Screw
Heating Fixer
Heating Element (550W)
Upper Heating Plate
Shaft
Protective Conduit
Rubber Protector
Cord Connection
Cord Retainer
Wire Connector
Spring Regulator
Spring
Arm Support
Nut (3/16”)
Lock Washer (3/16”)
Screw (3/16”)
Regulation Nut
Regulation Screw
3/16” Washer
3,5 Screw
Plate Protector
Foot
Bottom Cover Plate
Pilot Light ETL
4,8 Screw
50/300C Knob
Special Screw
Grease Collector
Body
Thermostat
Heating Plate Protection
Thermostat Bulb Retainer
Heating Element Retainer
Heating Element (1000W)
Heating Element Retainer Plate
Lower Heating Plate
1/4” Washer
1/4” Nut
Screw
Spring Support
Plate
37
40
39
43
11
29
41
10
44
45
32
30
33
4
11
5
67
98
13
49
50
SANDWICH GRILL (SASEG) SANDWICH GRILL (SASEG)
(STAINLESS STEEL ARM) (STAINLESS STEEL ARM)
42
Wiring Diagram
G
L2
L1
Amperage (A)
Dimensions WxHxD (cm/in)
Weight (kg/lbs)
Power (W)
Technical Data
1550
14.1
21.3/46.9
45/17.8 x 30/11.9 x 62/24.5
Voltage (V) 110
CROYDON
CROYDON
2
2
3
3
SASEG-100001-B2
51