Crt Mike User manual

Compliant

3

4

5

6

CONTENTS

FUNCTIONS AND CHARACTERS................................................................... 1

STANDARD ACCESSORIES............................................................................ 2

OPTIONAL ACCESSORIES ............................................................................. 2

INSTALLATION................................................................................................. 2

Microphone connection................................................................................ 2

Antenna connection ..................................................................................... 3

Power connection ........................................................................................ 3

Fuse replacement ........................................................................................ 3

Intall Microphone hanger ............................................................................. 4

Intall external speaker.................................................................................. 4

Install earphone ........................................................................................... 4

Install Remote PTT cable............................................................................. 4

KNOW ABOUT THIS RADIO............................................................................ 5

HOW TO USE THIS RADIO.............................................................................. 6

Power on radio............................................................................................. 6

Automatical Power on radio......................................................................... 6

Channel control............................................................................................ 6

Choose Norms............................................................................................. 6

Volume control (1-56 levels, Default level 54) ............................................. 7

Mute Function .............................................................................................. 7

Squelch control (1-28 Levels, Default Level 3) ............................................ 7

ASQ control(1-9 Levels, Default Level 5) .................................................... 7

LCD display ................................................................................................. 8

AM/FM mode .............................................................................................. 8

Transmitting ................................................................................................. 8

Receiving ..................................................................................................... 8

Time Out Timer ............................................................................................ 9

LCD color..................................................................................................... 9

Beep prompt ................................................................................................ 9

EMG channel............................................................................................... 9

Keypad lock ............................................................................................... 10

Frequency mode........................................................................................ 10

Scan........................................................................................................... 10

Memory channel ........................................................................................ 10

Using Memory Channel ............................................................................. 10

LCD Brightness.......................................................................................... 10

DW channels ............................................................................................. 11

Using DW function ..................................................................................... 11

NB/ANL function ........................................................................................ 11

RF Gain control.......................................................................................... 11

Factory reset.............................................................................................. 11

Norms and Frequency................................................................................... 12

.................................................................................................. 13

Microphone connection

Antenna connection

Power connection

Fuse replacement

Intall Microphone hanger

Intall external speaker

Install earphone

........................................................................................... 4

Install Remote PTT cable............................................................................. 4

KNOW ABOUT THIS RADIO

HOW TO USE THIS RADIO

.............................................................................. 6

Power on radio

............................................................................................. 6

Automatical Power on radio

............................................................................................ 6

............................................................................................. 6

......................................................................... 6

............................................................................................ 6

............................................................................................. 6

Volume control (1-56 levels, Default level 54)

.............................................................................................. 7

Squelch control (1-28 Levels, Default Level 3)

............................................ 7

ASQ control(1-9 Levels, Default Level 5)

.................................................... 7

................................................................................................. 8

.............................................................................................. 8

................................................................................................. 8

..................................................................................................... 8

............................................................................................ 9

..................................................................................................... 9

................................................................................................ 9

............................................................................................... 9

............................................................................................... 10

........................................................................................ 10

........................................................................................................... 10

........................................................................................ 10

............................................................................. 10

.......................................................................................... 10

.............................................................................................

11

1

FUNCTIONS AND CHARACTERS

Full Aluminum body offer best heat radiation

Remote control microphone with Wide angle Dot matrix LCD

Multiple norms: EU, EUH, CE, UK, PL, E1, I2, DE, DEH

3 color display: Blue, Purple, Orange

Dual watch

Full channel scan

EMG Channel CH9/19

SQ and ASQ Control

4 Memory channels for each Norm

SQ, VOL, voltage level display

Field strength display

Automatic Power on/Manual Power on

Time Out Timer

Keypad lock

Channel and Frequency mode

Optional earphone for Microphone

Optional remote PTT control cable

Remote control microphone with Wide angle Dot matrix LCD

Multiple norms: EU, EUH, CE, UK, PL, E1, I2, DE, DEH

3 color display: Blue, Purple, Orange

Dual watch

Full channel scan

EMG Channel CH9/19

SQ and ASQ Control

4 Memory channels for each Norm

SQ, VOL, voltage level display

Field strength display

Automatic Power on/Manual Power on

Channel and Frequency mode

Optional earphone for Microphone

Optional remote PTT control cable

2

STANDARD ACCESSORIES

OPTIONAL ACCESSORIES

INSTALLATION

Screws for bracket

Hanger

Pads for bracket

Self-tapping Screws

Adjusting knobs PadsFuse(2A,250V)

Choose a idea location to install the radio.

1. Mark the location for screws by intall racket.

2. Fix the bracket by screws.

3. Fix radio base into install bracket and lock by adjusting knobs.

1. Plug microphone connector into jack.

2. Pull on the dustproof cover for microphone connector.

Earphone

HS03

Remote PTT Control Cable

EK01

OPTIONAL ACCESSORIES

Screws for bracket

Hanger

Self-tapping Screws

Choose a idea location to install the radio.

1. Mark the location for screws by intall racket.

3. Fix radio base into install bracket and lock by adjusting knobs.

Earphone

HS03

3

Note: Never press PTT before install the antenna, it might burn the transistor.

1. Screw on the antenna into antenna jack.

2. To make full use of this radio, it is necessary to locate the antenna in a well

grounded place, and well adjust the SWR.

* Please enquiry the local dealer for choosing and intallation of suitable antenna.

This radio adopt 13.2V power supply.

Connect the red wire to the positive terminal of the battery, and the black wire to the

negative terminal of the battery.

This radio adopt 2A, 250V fuse

1. Open the fuse holder

2. Replace the fuse and screw on the holder.

2. To make full use of this radio, it is necessary to locate the antenna in a well

grounded place, and well adjust the SWR.

* Please enquiry the local dealer for choosing and intallation of suitable antenna.

This radio adopt 13.2V power supply.

Connect the red wire to the positive terminal of the battery, and the black wire to the

negative terminal of the battery.

Connect the red wire to the positive terminal of the battery, and the black wire to the

4

1. Choose idea location and mark for screw point.

2. Fix the hanger by the srews in accessory list.

This radio adopt 4-8 ohm, 4W external speaker.

1. Install the external speaker in idea location.

2. Plug in the seaker connector into jack.

1. Open the jack cover

2. Plug in the earphone into MIC/SP jack

1. Open the jack cover

2. Plug in the Remote PTT cable into PTT jack

This radio adopt 4-8 ohm, 4W external speaker.

1. Install the external speaker in idea location.

2. Plug in the seaker connector into jack.

5

KNOW ABOUT THIS RADIO

1FUNC/FRQ Function menu / frequency mode

2EMG/M1 EMG CH9 and CH19, or program with second function

3DW/M2 Dual watch, or program with second function

4SC/M3 Channel scan, or program with second function

5AF/M4 AM/FM selection, or program with second function

6VOL-, Squelch level - Decrease volume or Squelch level

7VOL+, Squelch level + Increase volume or Squelch level

8MT/SET Mute, Menu, Lock key

9PTT Transmitting

10 SQ, ASQ SQ/ASQ switch

11 POW Power key

12 UP Channel UP

13 DN Channel down

14 TX indicator

15 RX indicator

16 LCD

17 Ext MIC/SP jack

18 Ext remote PTT cable jack

19 Mike

20 Speaker

9

10

18

17

Function menu / frequency mode

EMG CH9 and CH19, or program with second function

Dual watch, or program with second function

Channel scan, or program with second function

AM/FM selection, or program with second function

VOL-, Squelch level - Decrease volume or Squelch level

VOL+, Squelch level + Increase volume or Squelch level

6

HOW TO USE THIS RADIO

Power on radio

Automatic Power on

Channel control

Choose Norms

1.

Note: Before using, check if the working frequency and Norms are valid in your country. If

not, change the norms according to following instruction. The radio is defaulted set on

EUH (AM/FM 4W). The norms list see page 12.

1. Short Press

2. Short Press key to enter Menu.

3. Repeatly short press key until LCD displays

BAND: XXX

4. Press or to choose the norms

Note:When the radio on, hold key until nothing appears on LCD and release

key, the radio will power off.

2. Adjust squelch level until you can hear background noise, refer to Page 7 about

Squelch level setup.

3. Adjust volume level to wanted level, refer to Page 7 about Volume level setup.

1. Short Press or key to choose

Channel.

2. Hold or key to choose channel fastly.

DN

POW UP

1. Short Press

2. Short Press key to enter Menu.

3. Repeatedly short press key until LCD displays

POR: XXX

4. Press or to choose POR: ON.

Repeat the above operation will turn off Automatic power on.

Automatic Power on

key, the radio will power off.

2. Adjust squelch level until you can hear background noise, refer to Page 7 about

Squelch level setup.

3. Adjust volume level to wanted level, refer to Page 7 about Volume level setup.

1. Short Press

2. Short Press

key to enter Menu.

3. Repeatedly short press

Note: Before using, check if the working frequency and Norms are valid in your country. If

not, change the norms according to following instruction. The radio is defaulted set on

key to choose

DN

PO

W U

key until LCD displays

to choose POR: ON.

Repeat the above operation will turn off Automatic power on.

7

ASQ control

1. Hold SQ/VOL key until the LCD displays ASQ:XX.

XX stands for the automatic squelch level.

Volume control ( 1-56 levels, Default level 54 )

Mute Function

1. Press SQ/VOL key repeatedly, until LCD display VOL: XX

XX stands for volume level.

2. Short Press or key to choose wanted

3. Hold can fast increase volume level,

can fast decrease volume level.

1. Short press will fastly mute the speaker, and

LCD displays VOL:MT

2. Press again, the volume will resume to

previous volume level setting.

Squelch control ( 1-28 Levels, Default Level 3)

1. Choose a channel which is not busy.

2. Short Press SQ/VOL key repeatedly until LCD

displays SQ: XX

XX stands for Squelch level.

3. Short press or key to choose desired

squelch level.

4. Hold or can fastly adjust squelch level.

5. Short press key until the noise just appears, then short press until the noise

just disappear the squelch level setup is done.

The deeper squelch level selected, the stronger signal required to open the speaker and

hear the calling.

(1-9 Levels, Default Level 5)

Hold

volume level.

2. Short press or key to choose desired

automatic squelch level.

3. Hold or can fastly adjust squelch level.

4. Repeat above operation to switch between ASQ and SQ level control,in ASQ mode ,

SQ level control will disappear and displays ASQ.

The deeper squelch level selected, the stronger signal required to open the speaker and

hear the calling.

Mute Function

3. Hold 3. Hold

can fast decrease volume level.

1. Short press

will fastly mute the speaker, and

LCD displays

VOL:MT

again, the volume will resume to

previous volume level setting.

Hold

volume level.

Squelch control ( 1-28 Levels, Default Level 3)

1. Choose a channel which is not busy.

SQ/VOL key repeatedly until LCD

key to choose desired

can fastly adjust squelch level.

key until the noise just appears, then short press

until the noise

The deeper squelch level selected, the stronger signal required to open the speaker and

8

LCD display

FM/AM Mode

Func

M1-M4:

Storage location

Scan

ASQ, SQ,VOL level

RX signal strength,

PWR: TX signal strength.

Current Voltage

Working norm

Current channel

1W/4W: Power level

CH9/19

Dual watch

ASQ

AM/FM mode

1. Short press key to switch between AM/FM

mode.

2. Corresponding mode will displayed in the LCD.

Keypad lock icon

Dot matrix LCD display for channel number, frequency and operations.

2 Digits for display of channel number and Norms

5 Digits for display of frequency and Norms

Transmitting

1. Hold [PTT] key, TX LED indicator light on.

2. Hold the microphone about 2cm away from

your mouth and speaker in a normal tone.

edom XR ot nrut oidar eht ]TTP[ esaeleR .3

TX LED indicator light off.

Receiving

The radio will keep in TX mode when it is not

transmitting, the RX LED indicator will light

on.

FM/AM Mode

Func

Storage location

Scan

ASQ, SQ,VOL level

Keypad lock icon

2 Digits for display of channel number and Norms

5 Digits for display of frequency and Norms

key to switch between AM

/F

M

2. Corresponding mode will displayed in the LCD.

5 Digits for display of frequency and Norms

9

Time Out Timer

1. Short Press

2. Short Press key to enter Menu.

3. Repeatly short press key until LCD displays

TOT: XXXX

4. Press or to adjust the TOT time.

LCD color

Beep Prompt

1. Short Press

2. Short Press key to enter Menu.

3. Repeatly short press key until LCD displays

COL: X

4. Press or to choose the color.

5. Sh

1. Short Press key, F Icon

2. Short Press key to enter Menu.

3. Repeatly press key until LCD displays

BEEP: XX

4. Press or to choose ON or OFF.

5. Short press any other key to c

EMG channel

1. First short press will choose CH9, the LCD

displays EMG Icon.

2. Second short press of will choose CH19.

3. Third short press of will resume to last none

EMG channel.

3. Repeatly short press key until LCD displays

TOT: XXXX

4. Press

LCD color

1. Short Press

2. Short Press

key to enter Menu.

3. Repeatly short press

key until LCD displays

to choose the color.

key until LCD displays

10

Keypad lock

1. To avoid wrong operation of keys, you can hold

key to lock the keypad.

2. The LCD displays .

3. Repeat the above function to unlock the keypad.

Frequency mode

1. Hold for over 5 seconds, the display will

change to frequency mode.

2. Repeat hold for over 5 seconds, the display

will change to channel mode.

Scan

1. Set SQ or y.

2. Short press key to start scanning the LCD

displays SC.

3. Press any key to stop scan, SC disappear.

Memory channel

In each norm, you can store 4 channels into M1, M2, M3, M4 for fast choose.

1. Choose the channel to be stored

2. Hold the memory key (M1, M2, M3, M4) to store it.

3. The corresponding memory channel will show on

LCD, the storage is done.

Using Memory Channel

1. Short press

2. Short press the memory key ( M1, M2 ,M3, M4 )

3. MEM disappears, the memory channel you chose will display in LCD.

1. Short press key

2. Short Press key to enter Menu.

3. Repeatly short press key until LCD displays

BRI: XX

4. Press or to choose brightness level.

LCD Brightness

3. Repeat the above function to unlock the keypad.

Frequency mode

1.

Hol

d

for over 5 sec

change to frequency mode.

2. Repeat hold

for over 5 seconds, the display

will change to channel mode.

y.

key to start s

cannincannin

g the LCD

3. Press any key to stop scan, SC disappear.

In each norm, you can store 4 channels into M1, M2, M3, M4 for fast choose.

2. Hold the memory key (M1, M2, M3, M4) to store it.

w on

3. MEM disappears, the memory channel you chose will display in LCD.

11

DW channels

2 channels need be pre-stored for dual watch function.

1. Short Press key

2. Short Press key to enter Menu.

3. Repeatly short press key until LCD displays

DW0: XX

4. Press or to choose first DW channel

5. Repeatly short press key until LCD displays

DW1: XX

6. Press or to choose second DW channel.

Using DW function

1. Short press key, the DW in LCD, the

Factory reset

1. Hold to Power off radio.

2. Hold key, then press key and release

key until LCD disaplays RE S.

3. Release , the radio recover to factory defual ff.

Factory reset

1. Short press key

2. Short Press key to enter Menu.

3. Repeatly short press key until LCD displays

NBAN: XX

4. Press or to choose ON or OF

function

1. Short press key

2. Short Press key to enter Menu.

3. Repeatly short press key until LCD displays

RFG: XX

4. Press or to choose RF gain level.

RF Gain control

2. Short Press

3.

Repea

DW0: XX

4.

Pre

ss

5.

Repea

t

ly

s s

horhor

t t

pre

DW1: XXDW1: XX

6. Press

or

to choose second DW channel.

Using DW function

key, the DW

in LCD, the

key to enter Menu.

LCD

di

s

pla

ys

12

Norms and Frequency

Band ID EU EUH CE UK PL IN I2 DE DEH

Europe Europe CEPT UK Poland India Italy Germany Germany

Power AM=1W AM=4W / / AM=4W AM=4W AM=4W AM=1W AM=4W

FM=4W FM=4W FM=4W FM=4W FM=4W FM=4W FM=4W FM=4W FM=4W

CH-01 26.965 26.965 26.965 27.60125 26.960 26.965 26.965 26.965 26.565

CH-02 26.975 26.975 26.975 27.61125 26.970 26.975 26.975 26.975 26.575

CH-03 26.985 26.985 26.985 27.62125 26.980 26.985 26.985 26.985 26.585

CH-04 27.005 27.005 27.005 27.63125 27.000 27.005 27.005 27.005 26.595

CH-05 27.015 27.015 27.015 27.64125 27.010 27.015 27.015 27.015 26.605

CH-06 27.025 27.025 27.025 27.65125 27.020 27.025 27.025 27.025 26.615

CH-07 27.035 27.035 27.035 27.66125 27.030 27.035 27.035 27.035 26.625

CH-08 27.055 27.055 27.055 27.67125 27.050 27.055 27.055 27.055 26.635

CH-09 27.065 27.065 27.065 27.68125 27.060 27.065 27.065 27.065 26.645

CH-10 27.075 27.075 27.075 27.69125 27.070 27.075 27.075 27.075 26.655

CH-11 27.085 27.085 27.085 27.70125 27.080 27.085 27.085 27.085 26.665

CH-12 27.105 27.105 27.105 27.71125 27.100 27.105 27.105 27.105 26.675

CH-13 27.115 27.115 27.115 27.72125 27.110 27.115 27.115 27.115 26.685

CH-14 27.125 27.125 27.125 27.73125 27.120 27.125 27.125 27.125 26.695

CH-15 27.135 27.135 27.135 27.74125 27.130 27.135 27.135 27.135 26.705

CH-16 27.155 27.155 27.155 27.75125 27.150 27.155 27.155 27.155 26.715

CH-17 27.165 27.165 27.165 27.76125 27.160 27.165 27.165 27.165 26.725

CH-18 27.175 27.175 27.175 27.77125 27.170 27.175 27.175 27.175 26.735

CH-19 27.185 27.185 27.185 27.78125 27.180 27.185 27.185 27.185 26.745

CH-20 27.205 27.205 27.205 27.79125 27.200 27.205 27.205 27.205 26.755

CH-21 27.215 27.215 27.215 27.80125 27.210 27.215 27.215 27.215 26.765

CH-22 27.225 27.225 27.225 27.81125 27.220 27.225 27.225 27.225 26.775

CH-23 27.255 27.255 27.255 27.82125 27.250 27.255 27.255 27.255 26.785

CH-24 27.235 27.235 27.235 27.83125 27.230 27.235 27.245 27.235 26.795

CH-25 27.245 27.245 27.245 27.84125 27.240 27.245 27.265 27.245 26.805

CH-26 27.265 27.265 27.265 27.85125 27.260 27.265 26.875 27.265 26.815

CH-27 27.275 27.275 27.275 27.86125 27.270 27.275 26.885 27.275 26.825

CH-28 27.285 27.285 27.285 27.87125 27.280 26.895 27.285 26.835

CH-29 27.295 27.295 27.295 27.88125 27.290 26.905 27.295 26.845

CH-30 27.305 27.305 27.305 27.89125 27.300 26.915 27.305 26.855

CH-31 27.315 27.315 27.315 27.90125 27.310 26.925 27.315 26.865

CH-32 27.325 27.325 27.325 27.91125 27.320 26.935 27.325 26.875

CH-33 27.335 27.335 27.335 27.92125 27.330 26.945 27.335 26.885

CH-34 27.345 27.345 27.345 27.93125 27.340 26.955 27.345 26.895

CH-35 27.355 27.355 27.355 27.94125 27.350 26.855 27.355 26.905

CH-36 27.365 27.365 27.365 27.95125 27.360 26.865 27.365 26.915

CH-37 27.375 27.375 27.375 27.96125 27.370 27.375 26.925

CH-38 27.385 27.385 27.385 27.97125 27.380 27.385 26.935

CH-39 27.395 27.395 27.395 27.98125 27.390 27.395 26.945

CH-40 27.405 27.405 27.405 27.99125 27.400 27.405 26.955

Power

CH-01

26.965 26.965 26.965 27.60125 26.960 26.965 26.965 26.965 26.56526.965 26.965 26.965 27.60125 26.960 26.965 26.965 26.965 26.565

CH-02

26.975 26.975 26.975 27.61125 26.970 26.975 26.975 26.975 26.575

CH-03

26.985 26.985 26.985 27.62125 26.980 26.985 26.985 26.985 26.585

CH-04

27.005 27.005 27.005 27.63125 27.000 27.005 27.005 27.005 26.595

CH-05CH-05

27.015 27.015 27.015 27.64125 27.010 27.015 27.015 27.015 26.605

CH-06

27.025 27.025 27.025 27.65125 27.020 27.025 27.025 27.025 26.615

CH-07

27.035 27.035 27.035 27.66125 27.030 27.035 27.035 27.035 26.625

27.055 27.055 27.055 27.67125 27.050 27.055 27.055 27.055 26.635

27.065 27.065 27.065 27.68125 27.060 27.065 27.065 27.065 26.645

27.075 27.075 27.075 27.69125 27.070 27.075 27.075 27.075 26.655

27.085 27.085 27.085 27.70125 27.080 27.085 27.085 27.085 26.665

27.105 27.105 27.105 27.71125 27.100 27.105 27.105 27.105 26.675

27.115 27.115 27.115 27.72125 27.110 27.115 27.115 27.115 26.685

27.105 27.105 27.105 27.71125 27.100 27.105 27.105 27.105 26.675

27.115 27.115 27.115 27.72125 27.110 27.115 27.115 27.115 26.685

27.125 27.125 27.125 27.73125 27.120 27.125 27.125 27.125 26.695

27.135 27.135 27.135 27.74125 27.130 27.135 27.135 27.135 26.705

27.155 27.155 27.155 27.75125 27.150 27.155 27.155 27.155 26.715

27.165 27.165 27.165 27.76125 27.160 27.165 27.165 27.165 26.725

27.175 27.175 27.175 27.77125 27.170 27.175 27.175 27.175 26.735

27.185 27.185 27.185 27.78125 27.180 27.185 27.185 27.185 26.745

27.205 27.205 27.205 27.79125 27.200 27.205 27.205 27.205 26.755

27.215 27.215 27.215 27.80125 27.210 27.215 27.215 27.215 26.765

27.225 27.225 27.225 27.81125 27.220 27.225 27.225 27.225 26.775

27.255 27.255 27.255 27.82125 27.250 27.255 27.255 27.255 26.785

27.235 27.235 27.235 27.83125 27.230 27.235 27.245 27.235 26.795

27.245 27.245 27.245 27.84125 27.240 27.245 27.265 27.245 26.805

27.265 27.265 27.265 27.85125 27.260 27.265 26.875 27.265 26.815

27.275 27.275 27.275 27.86125 27.270 27.275 26.885 27.275 26.825

26.895 27.285 26.835

26.905 27.295 26.845

26.915 27.305 26.855

26.925 27.315 26.865

26.935 27.325 26.875

26.945 27.335 26.885

26.955 27.345 26.895

26.855 27.355 26.905

26.865 27.365 26.915

13

TRANSMITTER

Power Output 4 WattsFM 1/4Watt AM

Transmission interference inferior to 4nW(-54dBm)

Frequency Response 300-3000Hz

Modulated signal distortion inferior to 5%

Output Impedance 50 ohms

RECEIVER

Sensitivity Less than 1uV for 10dB(S+N)/N

Image Rejection 70dB

Adjacent Channel Rejection 60 dB

IF Frequencies 1st 10.695MHz

2nd 455KHz

Automatic Gain Control(AGC) Less than 10dB change in audio

Output for inputs from 10 to 50000uV

Squelch less than 1uV

Audio Output Power 2Watts

Frequency Response 300-3000Hz

GENERAL

Modulation Mode AM/FM

Frequency Range 26.965-27.405Mhz

Frequency Tolerance ±5.0ppm

Input Voltage 13.2V

Dimensions(in mm) 112mm(L) x 143mm(W) X 30mm (H)

Weight 785g

Ferquency Control PLL Synthesizer

Operating Temperature Range -20° C TO + 55° C

Current Drain

Transmit 1.4A MAX

Receive Squelched 0.4A

VOL Max 1.3A

Antenna Connector UHF,SO-239

Transmission interference

Frequency Tolerance

Input Voltage

Dimensions(in mm)

Weight

Ferquency Control

Operating Temperature Range

Current Drain

Receive

VOL Max

Antenna Connector

Modulated signal distortion

RECEIVER

Less than 1uV for 10dB(S+N)/N

70dB

60 dB

1st 10.695MHz

2nd 455KHz

Less than 10dB change in audio

Output for inputs from 10 to 50000uV

less than 1uV

2Watts

300-3000Hz

compliant

15

CONDITIONS OF GUARANTEE

Our transceivers CRT SUPERSTAR are guaranteed on 2 year. The other

equipments: 6 months.

Any abnormality of functioning must be indicated to your retailer, who will

intervene or will send it to our technical service for

control.

The spare parts of our devices are the object of no sending under guarantee.

Are excluded of the guarantee:

- The damages caused by accidents, shocks, natural elements (lightning,

thunderstorm, static electricity etc.)

- The transistors of power, the microphones, the fuses, the bad uses: badly

adjusted antenna (tos excessive), inversion of polarity, surge, bad connection etc.

recognized by our technical service.

PROCEDURE ON RETURNING TO

THE AFTER-SALES SERVICE CRT

- If you send back a radio under guarantee for repair: You must pay the freight

costs to go. CRT will pay the freight costs return.

If the radio is not under guarantee postal charges are at your expense.

- Each device must be sent accompanied with a photocopy of the invoice as well

as with a descriptive note of the noticed defect.

If our AFTER-SALES SERVICE estimates the repair more expensive than the

value of the device, this one will send you an estimate which must have returned

to him accepted or refused. If the estimate is refused, the device will have carriage

forward return.

Any abnormality of functioning must be indicated to your retailer, who will

intervene or will send it to our technical service for

control.

The spare parts of our devices are the object of no sending under guarantee.

Are excluded of the guarantee:

- The damages caused by accidents, shocks, natural elements (lightning,

thunderstorm, static electricity etc.)

- The transistors of power, the microphones, the fuses, the bad uses: badly

adjusted antenna (tos excessive), inversion of polarity, surge, bad connection etc.

recognized by our technical service.

- If you send back a radio under guarantee for repair: You must pay the freight

If the radio is not under guarantee postal charges are at your expense.

- Each device must be sent accompanied with a photocopy of the invoice as well

If our AFTER-SALES SERVICE estimates the repair more expensive than the

value of the device, this one will send you an estimate which must have returned

to him accepted or refused. If the estimate is refused, the device will have carriage

THE AFTER-SALES SERVICE CRT

PROCEDURE ON RETURNING TO

CRT Mike User manual

Popular Radio manuals by other brands